currentmeter
2 layer board of 1.36 x 1.36 inches (34.4 x 34.4 mm)
Uploaded:
January 04, 2015
Shared:
January 24, 2015
Total Price:
$9.15
Microamp current meter
The board has space for a CR2032 battery on the bottom, and is designed to fit in a Hammond 1551P case, 40x40x20mm.
Microamp current meter
The board has space for a CR2032 battery on the bottom, and is designed to fit in a Hammond 1551P case, 40x40x20mm.
attiny10
2 layer board of 0.40 x 0.55 inches (10.2 x 14.0 mm)
Uploaded:
January 07, 2015
Shared:
January 07, 2015
Total Price:
$1.10
Breakout board for ATTiny10 with ISPogo.
In addition to the ATTiny10 there is a dual colour LED and a couple more islands for on-board passives for other circuits.
Breakout board for ATTiny10 with ISPogo.
In addition to the ATTiny10 there is a dual colour LED and a couple more islands for on-board passives for other circuits.
Nit841-v2
2 layer board of 1.36 x 1.36 inches (34.4 x 34.4 mm)
Uploaded:
December 21, 2014
Shared:
December 21, 2014
Total Price:
$9.15
NRF24 nitwork node with ATTiny841, LM92 or DS1621 temperature sensor, 3.3V regulator. It uses ISPogo landing pads for in-system programming.
This board is designed to fit in a Hammond 1551P case, 40x40x20mm. The board has space for a CR2032 battery on the bottom.
The NRF24 only fits in the …
Show full description
NRF24 nitwork node with ATTiny841, LM92 or DS1621 temperature sensor, 3.3V regulator. It uses ISPogo landing pads for in-system programming.
This board is designed to fit in a Hammond 1551P case, 40x40x20mm. The board has space for a CR2032 battery on the bottom.
The NRF24 only fits in the …
Show full description
ispogo-landing
2 layer board of 1.12 x 0.92 inches (28.4 x 23.3 mm)
Uploaded:
August 19, 2014
Shared:
August 19, 2014
Total Price:
$5.10
Landing pattern for ISP single in line 6-pin pogo adapter.
Not very useful except to show the minimal size of the pogo landing pads (7.5x1.25 mm). Two vias make contact with the longer power pins and are used for alignment and orientation.
Landing pattern for ISP single in line 6-pin pogo adapter.
Not very useful except to show the minimal size of the pogo landing pads (7.5x1.25 mm). Two vias make contact with the longer power pins and are used for alignment and orientation.
ispogo
2 layer board of 1.06 x 0.39 inches (26.9 x 9.9 mm)
Uploaded:
August 19, 2014
Shared:
August 19, 2014
Total Price:
$2.05
ISP single in line 6-pin pogo adapter for AVRs.
This updated version fixes a drill size issue and puts pin numbers on the silkscreen. It also makes it clearer that pins 2 and 6 should be slightly longer so as to make contact first. These two pins (VCC and GND) hit the alignment vias on the ta…
Show full description
ISP single in line 6-pin pogo adapter for AVRs.
This updated version fixes a drill size issue and puts pin numbers on the silkscreen. It also makes it clearer that pins 2 and 6 should be slightly longer so as to make contact first. These two pins (VCC and GND) hit the alignment vias on the ta…
Show full description
- ← Previous
- 1
- 2
- 3
- Next →
