DigiClone - rev1
2 layer board of 1.14 x 0.75 inches (28.8 x 19.0 mm)
Uploaded:
August 09, 2021
Shared:
January 31, 2022
Total Price:
$4.20
DigiSpark compatible using all thru-hole parts.
Rev 1 is reconstructed after loss of original design files.
DigiSpark compatible using all thru-hole parts.
Rev 1 is reconstructed after loss of original design files.
Foxhunt_Shield - Rev 4
2 layer board of 0.93 x 0.79 inches (23.5 x 20.0 mm)
Uploaded:
July 31, 2021
Shared:
July 31, 2021
Total Price:
$3.60
Interface a DigiSpark to your Baofeng HT to make a poor man’s fox for ham radio foxhunting.
Rev 2 moves PTT to P4 to solve a conflict with the Micronucleus bootloader.
Rev 3 adds audio input on P3.
Rev 4 moves audio input to P5 (that darn P3 bit me again!)
Interface a DigiSpark to your Baofeng HT to make a poor man’s fox for ham radio foxhunting.
Rev 2 moves PTT to P4 to solve a conflict with the Micronucleus bootloader.
Rev 3 adds audio input on P3.
Rev 4 moves audio input to P5 (that darn P3 bit me again!)
ESP-01_Tamer-u
2 layer board of 1.74 x 0.80 inches (44.2 x 20.4 mm)
Uploaded:
June 29, 2020
Shared:
July 31, 2020
Total Price:
$6.95
Just like my original ESP-01 Tamer (see my other projects), but with a micro USB socket instead of the USB-A plug.
This little board makes it super easy to use the ESP-8266 ESP-01 board in the Arduino environment. The following features are provided:
- CH340G based USB serial interface
…
Show full description
Just like my original ESP-01 Tamer (see my other projects), but with a micro USB socket instead of the USB-A plug.
This little board makes it super easy to use the ESP-8266 ESP-01 board in the Arduino environment. The following features are provided:
- CH340G based USB serial interface
…
Show full description
Low Power Flasher v2.0
2 layer board of 0.94 x 0.50 inches (23.9 x 12.8 mm)
Uploaded:
May 17, 2020
Shared:
May 17, 2020
Total Price:
$2.35
Uses an ATTiny13a in ultra-low-power mode to provide a light that flashes every few seconds. Good for find-in-the-dark, power-on-reminder, etc.
Version 2 adds ground jumper pads on remaining I/O pins so that they can be used as option inputs.
The source code is available on Github at: …
Show full description
Uses an ATTiny13a in ultra-low-power mode to provide a light that flashes every few seconds. Good for find-in-the-dark, power-on-reminder, etc.
Version 2 adds ground jumper pads on remaining I/O pins so that they can be used as option inputs.
The source code is available on Github at: …
Show full description
