2 layer board of 3.60 x 0.69 inches (91.3 x 17.5 mm)
Uploaded:
February 10th 2015
Shared:
February 10th 2015
Total Price:
$12.35
$12.35/set of 3. Untested, but will update this.
2 pieces break-apart and stack to form the dense, versatile FTDI module for the [Modul-Ar-duino](https…
$12.35/set of 3. Untested, but will update this.
2 pieces break-apart and stack to form the dense, versatile FTDI module for the Modul-Ar-duino.
Designed in pieces to make repair easier/quicker for those who may occasionally fry things, e.g. inexperienced students. Just unsolder the headers and solder on a new FT232RL carrier board. That way you’re back up and running quicker; replacing the dead chip can be done later.
Additionally versatile; can be populated with your choice of USB connectors- type B, A-mini with SMD or pT/H anchor tabs. Has DTR cap onboard for auto-reset of arduino, and optional shorting jumper for it, as well as DTR/RTS and 3v3/5V selection jumpers.
Also can be populated with your choice of male/female 6pin headers, top or bottom, 1x6 or 2x6 (use for greater height offsets) in either pin-thru-hole (pT/H) or surface mount (SMD) style - though you may want to scratch off the solder mask between the pairs of holes for the 2x6 connector to use SMD.
$12.35/set of 3. Untested, but will update this.
2 pieces break-apart and stack to form the dense, versatile FTDI module for the [Modul-Ar-duino](https…
$12.35/set of 3. Untested, but will update this.
2 pieces break-apart and stack to form the dense, versatile FTDI module for the Modul-Ar-duino.
Designed in pieces to make repair easier/quicker for those who may occasionally fry things, e.g. inexperienced students. Just unsolder the headers and solder on a new FT232RL carrier board. That way you’re back up and running quicker; replacing the dead chip can be done later.
Additionally versatile; can be populated with your choice of USB connectors- type B, A-mini with SMD or pT/H anchor tabs. Has DTR cap onboard for auto-reset of arduino, and optional shorting jumper for it, as well as DTR/RTS and 3v3/5V selection jumpers.
Also can be populated with your choice of male/female 6pin headers, top or bottom, 1x6 or 2x6 (use for greater height offsets) in either pin-thru-hole (pT/H) or surface mount (SMD) style - though you may want to scratch off the solder mask between the pairs of holes for the 2x6 connector to use SMD.
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
