Shared Projects by GeertVc

Shared Projects by GeertVc

PCA9548 Board Adapter - V01

Top
Bottom

2 layer board of 1.85 x 2.50 inches (47.0 x 63.6 mm)
Uploaded: October 14th 2019
Shared: November 15th 2019
Total Price: $23.15

This board makes it easy to use a PCA9548 I2C multiplexer in your projects. It has Phoenix Contact MKDSN 1,5/ 2-5,08 connectors (12 in total) to connect all I2C buses (one in and 8 out) as well as power supply, reset and address selection (you can have up to 8 I2C multiplexers on the same I2…

Show full description

This board makes it easy to use a PCA9548 I2C multiplexer in your projects. It has Phoenix Contact MKDSN 1,5/ 2-5,08 connectors (12 in total) to connect all I2C buses (one in and 8 out) as well as power supply, reset and address selection (you can have up to 8 I2C multiplexers on the same I2…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

I/O Motherboard - v01

Top
Bottom

2 layer board of 5.15 x 3.93 inches (130.9 x 99.8 mm)
Uploaded: June 11th 2015
Shared: December 29th 2017
Total Price: $101.25

I/O board to stack the Niko I/O boards.

I/O board to stack the Niko I/O boards.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Relay Control Board - v02

Top
Bottom

2 layer board of 3.61 x 4.31 inches (91.6 x 109.4 mm)
Uploaded: August 31st 2015
Shared: December 29th 2017
Total Price: $77.60

Board to control Omron G2R-2-SNDI relays

Board to control Omron G2R-2-SNDI relays

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

I/O for Switch Units + LED

Top
Bottom

2 layer board of 2.75 x 1.80 inches (70.0 x 45.8 mm)
Uploaded: November 22nd 2015
Shared: December 29th 2017
Total Price: $24.80

v02_1: small silkscreen additions.

v02_1: small silkscreen additions.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Display Converter Board

Top
Bottom

2 layer board of 0.95 x 0.91 inches (24.0 x 23.1 mm)
Uploaded: March 25th 2015
Shared: March 25th 2015
Total Price: $4.25

Display converter board to connect Sharp display LS027B7DH01LCD through SMD connector and Raspberry Pi through 10-pins header. SPI protocol to be used to control the display.

Display converter board to connect Sharp display LS027B7DH01LCD through SMD connector and Raspberry Pi through 10-pins header. SPI protocol to be used to control the display.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC