Shared Projects by FlyingPoo86

Shared Projects by FlyingPoo86

Fuzzy's board with holes

2 layer board of 2.13 x 2.13 inches (54.1 x 54.1 mm)
Uploaded: April 05, 2023
Shared: April 05, 2023
Total Price: $22.65

Embeddable link to order this shared Project

USB ATTINY85 NOIO

2 layer board of 0.44 x 0.82 inches (11.2 x 20.8 mm)
Uploaded: October 07, 2022
Shared: October 07, 2022
Total Price: $1.80

ATTiny85 for use with Keyboard/USB device emulation using the Digispark Keyboard Library (or others). Be sure to flash a bootloader to the ATTiny85 that supports USB before soldering to this board.
Requires:
ATTINY85-20SU
1 of 0603 1.5K ohm resister
2 of 0603 68 ohm resistors
2 of SOD8…

Show full description

ATTiny85 for use with Keyboard/USB device emulation using the Digispark Keyboard Library (or others). Be sure to flash a bootloader to the ATTiny85 that supports USB before soldering to this board.
Requires:
ATTINY85-20SU
1 of 0603 1.5K ohm resister
2 of 0603 68 ohm resistors
2 of SOD8…

Show full description

Embeddable link to order this shared Project

Pico-Ducky-PCBUSB

2 layer board of 0.75 x 1.74 inches (19.2 x 44.2 mm)
Uploaded: September 30, 2022
Shared: September 30, 2022
Total Price: $6.55

Custom, compact board based off the Raspberry Pi Pico USB Ducky.

Will probably require a stencil and reflow oven. This is only 0.75in x 1.5in not counting the usb connector.

Parts List:
10 of C1-C7,C10,C11,C14 100nF 10% 0402
2 of C8,C9 1uF 10% 0402
2 of C12,C13 10uF 20% 0603
2 …

Show full description

Custom, compact board based off the Raspberry Pi Pico USB Ducky.

Will probably require a stencil and reflow oven. This is only 0.75in x 1.5in not counting the usb connector.

Parts List:
10 of C1-C7,C10,C11,C14 100nF 10% 0402
2 of C8,C9 1uF 10% 0402
2 of C12,C13 10uF 20% 0603
2 …

Show full description

Embeddable link to order this shared Project

Arduino Pro Mini Laser Shield

2 layer board of 2.40 x 2.38 inches (60.9 x 60.4 mm)
Uploaded: August 26, 2022
Shared: September 19, 2022
Total Price: $28.50

A simple shield for a laser engraver. 1000uF caps should be 100uF. Misprint on my part.

A simple shield for a laser engraver. 1000uF caps should be 100uF. Misprint on my part.

Embeddable link to order this shared Project