Shared Projects by DragonMinded

Shared Projects by DragonMinded

Jamma Adapter

Top
Bottom

2 layer board of 4.89 x 1.58 inches (124.1 x 40.1 mm)
Uploaded: April 02, 2022
Shared: April 02, 2022
Total Price: $38.55

A JAMMA adapter board that can be used to make different adapters.

A JAMMA adapter board that can be used to make different adapters.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SEGA 839-1187 Replacement PCB.

Top
Bottom

2 layer board of 2.78 x 1.58 inches (70.6 x 40.1 mm)
Uploaded: May 11, 2020
Shared: December 20, 2021
Total Price: $21.90

Second revision board with UL marking spoof removed and URL relocated. A reproduction of a legacy analog conversion board used for NAOMI arcade games which need analog input from a joystick.

Second revision board with UL marking spoof removed and URL relocated. A reproduction of a legacy analog conversion board used for NAOMI arcade games which need analog input from a joystick.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Grid SRAM Shield

Top
Bottom

2 layer board of 2.70 x 2.10 inches (68.7 x 53.4 mm)
Uploaded: January 02, 2021
Shared: January 20, 2021
Total Price: $28.40

An Arduino Shield for the Grid SRAM project (https://github.com/DragonMinded/gridsram). Its recommended that you use sockets for all 7400 logic, as well as (obviously) a socket for the SRAM chip. That way, you don't risk burning out the chips when soldering. There is limited clearance under the b…

Show full description

An Arduino Shield for the Grid SRAM project (https://github.com/DragonMinded/gridsram). Its recommended that you use sockets for all 7400 logic, as well as (obviously) a socket for the SRAM chip. That way, you don't risk burning out the chips when soldering. There is limited clearance under the b…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Toshiba PF D29C051 Extended Remote

Top
Bottom

2 layer board of 3.53 x 0.98 inches (89.8 x 24.8 mm)
Uploaded: August 20, 2020
Shared: August 20, 2020
Total Price: $17.20

A remote board that allows you to adjust geometry and RGB settings on a Toshiba Pure Flat D29C051 monitor. See https://www.arcade-projects.com/forums/index.php?thread/8446-new-net-city-enhanced-monitor-remote-pcb/ for details. Thanks to codecrank for the gerber files!

BOM is as follows:

but…

Show full description

A remote board that allows you to adjust geometry and RGB settings on a Toshiba Pure Flat D29C051 monitor. See https://www.arcade-projects.com/forums/index.php?thread/8446-new-net-city-enhanced-monitor-remote-pcb/ for details. Thanks to codecrank for the gerber files!

BOM is as follows:

but…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy