Printrbot simple 1405 lights and fan
2 layer board of 1.66 x 1.58 inches (42.1 x 40.1 mm)
Uploaded:
May 13th 2021
Shared:
June 22nd 2021
Total Price:
$13.05
Board to add a fan on the extruder and lights over the nozzle. The board can fit an array of fan sizes from 20-40 square by 10 deep. The side button is to switch
Board to add a fan on the extruder and lights over the nozzle. The board can fit an array of fan sizes from 20-40 square by 10 deep. The side button is to switch
Incubator Control Board V2
2 layer board of 1.38 x 0.79 inches (35.2 x 20.0 mm)
Uploaded:
June 22nd 2021
Shared:
June 22nd 2021
Total Price:
$5.45
Incubator control board. This board interfaces the Arduino with the fans, temperature sensor, lights, voltage regulators, and Peltier controller. Uses all through-hole components to make assembly easier for users.
Incubator control board. This board interfaces the Arduino with the fans, temperature sensor, lights, voltage regulators, and Peltier controller. Uses all through-hole components to make assembly easier for users.
DataLoggerV3.3
2 layer board of 1.73 x 2.59 inches (43.8 x 65.7 mm)
Uploaded:
November 27th 2018
Shared:
November 28th 2018
Total Price:
$22.30
Same as V3.2 added THT for RFM83C receiver and updated to correct micro SD card wiring. This version has slightly different trace routing and better silkscreen labeling.
Same as V3.2 added THT for RFM83C receiver and updated to correct micro SD card wiring. This version has slightly different trace routing and better silkscreen labeling.
MicroSDCardV1.1
2 layer board of 0.62 x 1.06 inches (15.7 x 26.8 mm)
Uploaded:
November 27th 2018
Shared:
November 28th 2018
Total Price:
$3.25
Breakout with MCP1700-3302 LDO and CD74HC4050PWR logic level shifter. Increased trace size from V1.0.
Breakout with MCP1700-3302 LDO and CD74HC4050PWR logic level shifter. Increased trace size from V1.0.
DataLoggerBattPowerV2
2 layer board of 2.60 x 2.59 inches (66.0 x 65.7 mm)
Uploaded:
November 21st 2018
Shared:
November 21st 2018
Total Price:
$33.60
Same as original except corrected logic level shifting circuit for SD card
Same as original except corrected logic level shifting circuit for SD card
