2 layer board of 0.72 x 0.66 inches (18.3 x 16.9 mm)
Uploaded:
December 01, 2021
Shared:
December 01, 2021
Total Price:
$2.35
A quick and dirty board to allow you to connect to the STM32 Nucleo board's programming port and convert it to a standard 1.27 mm 2x5 SWD connector. This would be useful if you've converted your Nucleo board to be a Black Magic Probe programmer.
Instructions for converting your Nucleo board i…
A quick and dirty board to allow you to connect to the STM32 Nucleo board’s programming port and convert it to a standard 1.27 mm 2x5 SWD connector. This would be useful if you’ve converted your Nucleo board to be a Black Magic Probe programmer.
Instructions for converting your Nucleo board into a Black Magic Probe can be found here:
https://mjoldfield.com/atelier/2018/08/nucleo-bmp.html
You will need a few 0.100" (2.54 mm) headers and a surface-mount 2x5 0.050" (1.27 mm) header, preferably with the SWD shroud (see DigiKey PN 1175-2643-1-ND).
Show full description
A quick and dirty board to allow you to connect to the STM32 Nucleo board's programming port and convert it to a standard 1.27 mm 2x5 SWD connector. This would be useful if you've converted your Nucleo board to be a Black Magic Probe programmer.
Instructions for converting your Nucleo board i…
A quick and dirty board to allow you to connect to the STM32 Nucleo board’s programming port and convert it to a standard 1.27 mm 2x5 SWD connector. This would be useful if you’ve converted your Nucleo board to be a Black Magic Probe programmer.
Instructions for converting your Nucleo board into a Black Magic Probe can be found here:
https://mjoldfield.com/atelier/2018/08/nucleo-bmp.html
You will need a few 0.100" (2.54 mm) headers and a surface-mount 2x5 0.050" (1.27 mm) header, preferably with the SWD shroud (see DigiKey PN 1175-2643-1-ND).
Show full description
