Shared Projects by Altitude909

Shared Projects by Altitude909

Pot adapter dual

Top
Bottom

2 layer board of 0.38 x 0.62 inches (9.5 x 15.7 mm)
Uploaded: April 26, 2014
Shared: January 04, 2016
Total Price: $1.15

9mm Alpha dual pot adapter

9mm Alpha dual pot adapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TTSH Micro Gate Booster

Top
Bottom

2 layer board of 1.58 x 1.04 inches (40.0 x 26.4 mm)
Uploaded: April 01, 2015
Shared: October 25, 2015
Total Price: $8.15

Miniaturized version of Fuzzbass's gate booster for the TTSH.

BOM

top

schematic

Miniaturized version of Fuzzbass's gate booster for the TTSH.

BOM

top

schematic

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BA662 Clone with DC offset Trimmer

Top
Bottom

2 layer board of 0.86 x 0.39 inches (21.9 x 9.8 mm)
Uploaded: June 19, 2015
Shared: June 19, 2015
Total Price: $1.65

Clone of the BA662 OTA use in old Roland Machines. I've added a trimmer and resistor to trim off the DC offset like on the SH-101 PCB. Interestingly enough, those parts were never populated on the SH-101 (probably cheaper to bin the parts for offset). This is the same mod that I documented for…

Show full description

Clone of the BA662 OTA use in old Roland Machines. I've added a trimmer and resistor to trim off the DC offset like on the SH-101 PCB. Interestingly enough, those parts were never populated on the SH-101 (probably cheaper to bin the parts for offset). This is the same mod that I documented for…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TTSH OSC Sync Board Rev A

Top
Bottom

2 layer board of 1.84 x 0.90 inches (46.7 x 22.9 mm)
Uploaded: May 07, 2015
Shared: May 09, 2015
Total Price: $8.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

3.5mm x 4 Jack Board

Top
Bottom

2 layer board of 1.88 x 0.94 inches (47.7 x 23.8 mm)
Uploaded: April 25, 2015
Shared: April 25, 2015
Total Price: $8.80

0.5" centers with switched outs

Recommended jacks can be found here:

http://erthenvar.com/store/accessories/3.5mm-right-angle-jacks

http://misw.us/breakout.JPG

0.5" centers with switched outs

Recommended jacks can be found here:

http://erthenvar.com/store/accessories/3.5mm-right-angle-jacks

http://misw.us/breakout.JPG

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy