ATtiny841 Breakout
2 layer board of 0.73 x 1.08 inches (18.5 x 27.5 mm)
Uploaded:
January 24, 2019
Shared:
January 24, 2019
Total Price:
$3.95
Minimal breakout for ATtiny841. Has reset button, ICSP port, and 3.3V regulator to accept 3.9V - 9V supply. Uses the calibrated internal 8MHz oscillator which is ±2% when Vcc is <4V (this breakout regulates to 3.3V).
Minimal breakout for ATtiny841. Has reset button, ICSP port, and 3.3V regulator to accept 3.9V - 9V supply. Uses the calibrated internal 8MHz oscillator which is ±2% when Vcc is <4V (this breakout regulates to 3.3V).
Z Probe Logic Level converter [semi-tested]
2 layer board of 1.41 x 0.59 inches (35.8 x 15.0 mm)
Uploaded:
October 22, 2015
Shared:
October 23, 2015
Total Price:
$4.15
You can purchase the parts using this Digikey BOM
Uses a LTV-817 optoisolator to convert a 12V signal to a 5V signal (Normally Closed). For use in a reprap auto-level using a induction or capa…
Show full description
You can purchase the parts using this Digikey BOM
Uses a LTV-817 optoisolator to convert a 12V signal to a 5V signal (Normally Closed). For use in a reprap auto-level using a induction or capa…
Show full description
MSGEQ7 Breakout
2 layer board of 0.99 x 0.63 inches (25.0 x 16.0 mm)
Uploaded:
July 20, 2014
Shared:
July 20, 2014
Total Price:
$3.10
Breakout Board for the MSGEQ7. BoM: 2x100nF Cap,1x10nF Cap, 1x33pF Cap, 1x200kOhm Res, 1xMSGEQ7 and/or Socket, 1x6pin header
Breakout Board for the MSGEQ7. BoM: 2x100nF Cap,1x10nF Cap, 1x33pF Cap, 1x200kOhm Res, 1xMSGEQ7 and/or Socket, 1x6pin header
