Shared Projects

Shared Projects

clock1

author: wjhos
Top
Bottom

2 layer board of 2.39 x 0.55 inches (60.6 x 14.0 mm)
Uploaded: October 28th 2015
Shared: November 10th 2015
Total Price: $6.55

componentless clock Based on a design by http://www.romanblack.com/led_none.htm using original display

componentless clock Based on a design by http://www.romanblack.com/led_none.htm using original display

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

dual display

author: wjhos
Top
Bottom

2 layer board of 0.80 x 0.51 inches (20.4 x 12.9 mm)
Uploaded: September 10th 2015
Shared: November 10th 2015
Total Price: $2.00

dual display

dual display

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

15063^0

author: epccs
Top
Bottom

2 layer board of 4.25 x 4.20 inches (108.0 x 106.7 mm)
Uploaded: November 10th 2015
Shared: November 10th 2015
Total Price: $89.25

PulseDAQ

The goal for this board is to implement the basic data acquisition electronics for a reasonably accurate flow lab, e.g. flow meter and calibrat…

PulseDAQ

The goal for this board is to implement the basic data acquisition electronics for a reasonably accurate flow lab, e.g. flow meter and calibrat…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Mitchine 2015

author: shoelessone
Top
Bottom

2 layer board of 1.69 x 1.50 inches (42.8 x 38.1 mm)
Uploaded: November 9th 2015
Shared: November 10th 2015
Total Price: $12.65

Mitchine 2015 REVA

Mitchine 2015 REVA

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Open EVSE V4.23 DIY

author: Barbouri
Top
Bottom

2 layer board of 3.34 x 2.55 inches (84.9 x 64.8 mm)
Uploaded: November 10th 2015
Shared: November 10th 2015
Total Price: $42.60

DIY Open EVSE version 4.23 w/ pwr options <http://www.barbouri.com/> ![Open EVSE DIY board Version 4.23](https://c3.staticflickr.com/6/5788/23498834626_266…

DIY Open EVSE version 4.23 w/ pwr options <http://www.barbouri.com/> ![Open EVSE DIY board Version 4.23](https://c3.staticflickr.com/6/5788/23498834626_266…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

SENtralReferenceDesign.v03

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 0.51 inches (17.9 x 12.8 mm)
Uploaded: November 10th 2015
Shared: November 10th 2015
Total Price: $3.50

Reference design for the EM7180 sensor hub and MPU9250 9 DoF motion sensor and MS5637 pressure sensor. SENtral manages the sensors providing quaternions, Eul…

Reference design for the EM7180 sensor hub and MPU9250 9 DoF motion sensor and MS5637 pressure sensor. SENtral manages the sensors providing quaternions, Eul…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

STM32L476.v02

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 1.41 inches (17.9 x 35.7 mm)
Uploaded: November 10th 2015
Shared: November 10th 2015
Total Price: $9.90

Basic breakout for STM32L476. Added rgb led, diodes for power in, and fixed minor trace errors.

Basic breakout for STM32L476. Added rgb led, diodes for power in, and fixed minor trace errors.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

minicopter/201510.1

author: jaw
Top
Bottom

4 layer board of 0.99 x 0.99 inches (25.0 x 25.0 mm)
Uploaded: October 9th 2015
Shared: November 10th 2015
Total Price: $9.70

teeny-tiny autonomous quadcopter flying machine <https://github.com/jaw0/minicopter> <https://hackaday.io/project/7947-quadcopter-in-one-inch>

teeny-tiny autonomous quadcopter flying machine <https://github.com/jaw0/minicopter> <https://hackaday.io/project/7947-quadcopter-in-one-inch>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Galaxy Trucker Timer v1

author: Squeegy
Top
Bottom

2 layer board of 2.22 x 2.22 inches (56.4 x 56.4 mm)
Uploaded: November 9th 2015
Shared: November 10th 2015
Total Price: $24.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

STM32F030F4P6 breakout board v5

author: chris
Top
Bottom

2 layer board of 1.00 x 0.60 inches (25.4 x 15.3 mm)
Uploaded: November 9th 2015
Shared: November 9th 2015
Total Price: $3.00

Minimal breakout board for the STM32F030F4P6

v5: added pull-down to BOOT0 pin, slightly increased silk screen type size, minor changes to routing

BOM…

Minimal breakout board for the STM32F030F4P6

v5: added pull-down to BOOT0 pin, slightly increased silk screen type size, minor changes to routing

BOM…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

1.25 PicoBlade Parallel Splitter

author: drbogger
Top
Bottom

2 layer board of 1.10 x 0.25 inches (27.9 x 6.4 mm)
Uploaded: February 23rd 2014
Shared: November 9th 2015
Total Price: $1.35

For 1.25mm Pitch PicoBlade Connectors. Connectors can be ordered at: [www.spaelectronics.com](http://www.spaelectronics.com/shop/micro_jst_2-pin_set.html?ca…

For 1.25mm Pitch PicoBlade Connectors. Connectors can be ordered at: [www.spaelectronics.com](http://www.spaelectronics.com/shop/micro_jst_2-pin_set.html?ca…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

ExtraCore-MD

author: ModernDevice
Top
Bottom

2 layer board of 0.82 x 0.92 inches (20.8 x 23.4 mm)
Uploaded: October 7th 2014
Shared: November 9th 2015
Total Price: $3.75

Descendant of https://github.com/dustinandrews/ExtraCore

Descendant of https://github.com/dustinandrews/ExtraCore

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

MP3board

author: ModernDevice
Top
Bottom

2 layer board of 2.63 x 1.21 inches (66.9 x 30.7 mm)
Uploaded: October 30th 2014
Shared: November 9th 2015
Total Price: $15.90

MP3board

MP3board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Bubiii2

author: ModernDevice
Top
Bottom

2 layer board of 0.76 x 0.63 inches (19.3 x 15.9 mm)
Uploaded: March 27th 2015
Shared: November 9th 2015
Total Price: $2.35

Bubiii2

Bubiii2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

SMD LCD117 r3

author: ModernDevice
Top
Bottom

2 layer board of 1.75 x 1.08 inches (44.6 x 27.4 mm)
Uploaded: June 25th 2015
Shared: November 9th 2015
Total Price: $9.45

LCD117, SMD. Now with fewer bugs!

LCD117, SMD. Now with fewer bugs!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Fluxamasynth R3 v7

author: ModernDevice
Top
Bottom

2 layer board of 2.70 x 2.10 inches (68.6 x 53.4 mm)
Uploaded: November 6th 2015
Shared: November 9th 2015
Total Price: $28.35

Tented vias, tighter mask, bigger diode footprint

Tented vias, tighter mask, bigger diode footprint

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

DS2482-800 (1-wire) breakout

author: dimonic
Top
Bottom

2 layer board of 1.00 x 0.69 inches (25.3 x 17.6 mm)
Uploaded: November 9th 2015
Shared: November 9th 2015
Total Price: $3.45

Breakout board for i2c to 8-channel dallas 1-wire protocol (Creative commons license from inmojo ). [Home page repository](http://www.inmojo.com/store/inmojo…

Breakout board for i2c to 8-channel dallas 1-wire protocol (Creative commons license from inmojo ). [Home page repository](http://www.inmojo.com/store/inmojo…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Tapeplug

author: ikorb
Top
Bottom

2 layer board of 1.09 x 0.79 inches (27.6 x 20.1 mm)
Uploaded: November 9th 2015
Shared: November 9th 2015
Total Price: $4.30

Plug-to-Plug adapter for C64 tape connectors

Plug-to-Plug adapter for C64 tape connectors

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

P12347-01CT.v01

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 0.31 inches (17.9 x 7.8 mm)
Uploaded: November 9th 2015
Shared: November 9th 2015
Total Price: $2.10

Breakout board for Hamamatsu's P12347-01CT color/proximity sensor.

Breakout board for Hamamatsu's P12347-01CT color/proximity sensor.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

bee_counter3.1

author: hydronics
Top
Bottom

2 layer board of 6.20 x 0.63 inches (157.5 x 15.9 mm)
Uploaded: June 15th 2015
Shared: November 9th 2015
Total Price: $19.35

harvard design

harvard design

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project
Whaleshark white