Shared Projects

Shared Projects

RS-15 Thruster Kill

author: Ryan-Summers

2 layer board of 1.63 x 0.77 inches (41.4 x 19.6 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $6.25

This board kills power to the thrusters on the submarine and transmits a signal over UART to the sensor board to inform it that the thrusters are offline.

This board kills power to the thrusters on the submarine and transmits a signal over UART to the sensor board to inform it that the thrusters are offline.

Embeddable link to order this shared Project

RS-15 Sensor Board

author: Ryan-Summers

2 layer board of 2.11 x 1.29 inches (53.6 x 32.8 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $13.60

This board interprets signals sent to it from external sensors and converts all data to uart and creates packages. These packages are then sent up to the UAR…

This board interprets signals sent to it from external sensors and converts all data to uart and creates packages. These packages are then sent up to the UAR…

Embeddable link to order this shared Project

RS-15 Power Cutoff Board

author: Ryan-Summers

2 layer board of 1.63 x 0.82 inches (41.3 x 20.7 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $6.60

This board will cutoff external battery power when the voltage drops to a certain point to maintain battery health

This board will cutoff external battery power when the voltage drops to a certain point to maintain battery health

Embeddable link to order this shared Project

RS-15 Pneumatics Board

author: Ryan-Summers

2 layer board of 1.79 x 1.75 inches (45.5 x 44.5 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $15.65

This board controls the pneumatic systems on the submarine.

This board controls the pneumatic systems on the submarine.

Embeddable link to order this shared Project

RS-15 Regulator

author: Ryan-Summers

2 layer board of 3.09 x 2.01 inches (78.4 x 51.0 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $31.00

This board takes in unregulated voltage from the battery and converts it down to 12V, 5V, and 3V3 for use by the electrical subsystems.

This board takes in unregulated voltage from the battery and converts it down to 12V, 5V, and 3V3 for use by the electrical subsystems.

Embeddable link to order this shared Project

RS-15 36Pin Breakout

author: Ryan-Summers

2 layer board of 2.88 x 0.83 inches (73.0 x 21.1 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $11.90

This board is designed for the 36 pin edge connector used on the sbumarine. The purpose of this board is to provide header pin breakouts for the edge connect…

This board is designed for the 36 pin edge connector used on the sbumarine. The purpose of this board is to provide header pin breakouts for the edge connect…

Embeddable link to order this shared Project

RS-15 20Pin Breakout

author: Ryan-Summers

2 layer board of 1.63 x 0.69 inches (41.4 x 17.5 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $5.60

This board is designed for the 20 pin edge connector. The purpose of this board is to provide header breakouts for the edge connectors used on the submarine.

This board is designed for the 20 pin edge connector. The purpose of this board is to provide header breakouts for the edge connectors used on the submarine.

Embeddable link to order this shared Project

BLF 10dd single side

author: Cereal_Killer

2 layer board of 0.40 x 0.40 inches (10.1 x 10.1 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $0.75

single side 10mm FET driver for SOT-23 MCU's (PIC or ATTiny10)

single side 10mm FET driver for SOT-23 MCU's (PIC or ATTiny10)

Embeddable link to order this shared Project

500002A1 RTD

author: SensorCity

2 layer board of 2.41 x 1.83 inches (61.2 x 46.5 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $22.05

RTD Sensor

RTD Sensor

Embeddable link to order this shared Project

DE2-vd PCBv1.1

author: marqs

2 layer board of 3.05 x 2.49 inches (77.6 x 63.4 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $38.05

Video digitization module for DE2-115 FPGA board

Video digitization module for DE2-115 FPGA board

Embeddable link to order this shared Project

PCB262-dau-boards

author: Sheepdog

2 layer board of 1.95 x 1.80 inches (49.6 x 45.8 mm)
Uploaded: February 5th 2015
Shared: February 16th 2015
Total Price: $17.60

My first OSH Park venture! Used pcVash, Kicad. For NoviceGuard. Evening of Ch…

My first OSH Park venture! Used pcVash, Kicad. For NoviceGuard. Evening of Ch…

Embeddable link to order this shared Project

[untested][super-difficult] 10mm DD + single 7135 w/ LFPAK33 v009

author: Red

2 layer board of 0.40 x 0.40 inches (10.0 x 10.0 mm)
Uploaded: February 16th 2015
Shared: February 16th 2015
Total Price: $0.75

Don’t try this at home. Order one to cry over if you want.

Forum Thread: http://budgetlightforum.com/node/37726

Don’t try this at home. Order one to cry over if you want.

Forum Thread: http://budgetlightforum.com/node/37726

Embeddable link to order this shared Project

SmartPakku

author: resolutedreamer

2 layer board of 1.97 x 2.09 inches (50.0 x 53.0 mm)
Uploaded: January 21st 2015
Shared: February 16th 2015
Total Price: $20.55

Arduino Uno Shield for SmartPakku, the world's first smart backpack system: smartpakku.resolutedreamer.com

Arduino Uno Shield for SmartPakku, the world's first smart backpack system: smartpakku.resolutedreamer.com

Embeddable link to order this shared Project

INMP441.I2SMicrophone.v03

author: PeskyProducts

2 layer board of 3.44 x 0.39 inches (87.5 x 9.9 mm)
Uploaded: February 15th 2015
Shared: February 16th 2015
Total Price: $6.70

Test of INMP441 I2S microphone on flex cable.

Test of INMP441 I2S microphone on flex cable.

Embeddable link to order this shared Project

High power microcontroller controlled Lowside Fet swich

author: Dumle29

2 layer board of 2.19 x 1.86 inches (55.6 x 47.2 mm)
Uploaded: February 15th 2015
Shared: February 15th 2015
Total Price: $20.30

A board used to switch of a 12v load, after a certain amount of time, or on low battery voltage !!!NOT TESTED!!!

A board used to switch of a 12v load, after a certain amount of time, or on low battery voltage !!!NOT TESTED!!!

Embeddable link to order this shared Project

Resolution SMT 360 Breakout

author: gigneil

2 layer board of 1.26 x 1.03 inches (32.0 x 26.2 mm)
Uploaded: February 15th 2015
Shared: February 15th 2015
Total Price: $6.45

Based on the Sparkfun Copernicus II Dip Board

Based on the Sparkfun Copernicus II Dip Board

Embeddable link to order this shared Project

Multicopter Custom Arms - ESC connection

author: depewke

2 layer board of 1.19 x 0.75 inches (30.1 x 19.0 mm)
Uploaded: January 1st 2015
Shared: February 15th 2015
Total Price: $4.40

Board to connect ESC and Nav light power and signal lines

Board to connect ESC and Nav light power and signal lines

Embeddable link to order this shared Project

ESC Calibration Board

author: depewke

2 layer board of 0.99 x 0.80 inches (25.1 x 20.3 mm)
Uploaded: February 15th 2015
Shared: February 15th 2015
Total Price: $3.90

quickly connects up to 8 ESCs to an RX for calibration

quickly connects up to 8 ESCs to an RX for calibration

Embeddable link to order this shared Project

Zero BLE XBee V2.0

author: micahpearlman

2 layer board of 1.02 x 1.37 inches (25.8 x 34.7 mm)
Uploaded: February 3rd 2015
Shared: February 15th 2015
Total Price: $6.90

HM-10 BLE to XBee breakout

HM-10 BLE to XBee breakout

Embeddable link to order this shared Project

Triple Ethernet Breakout

author: yakovdk

2 layer board of 3.36 x 1.90 inches (85.4 x 48.3 mm)
Uploaded: January 3rd 2015
Shared: February 15th 2015
Total Price: $31.90

Breakout board with three ENC424J600s for using parallel interface.

Breakout board with three ENC424J600s for using parallel interface.

Embeddable link to order this shared Project