Shared Projects

Shared Projects

TTL2RS232

author: pgettings
Top
Bottom

2 layer board of 0.87 x 1.24 inches (22.2 x 31.6 mm)
Uploaded: May 14th 2023
Shared: May 14th 2023
Total Price: $5.40

Interface DB-9 connector to Sparkfun MAX3232 breakout board (BOB-11189). Connect TTL signals, 3.3 to 5 V, and ground to 4 pins at the edge of the board. Directly plug BOB-11189 into a header, or solder header pins between the boards. No mounting holes.

Interface DB-9 connector to Sparkfun MAX3232 breakout board (BOB-11189). Connect TTL signals, 3.3 to 5 V, and ground to 4 pins at the edge of the board. Directly plug BOB-11189 into a header, or solder header pins between the boards. No mounting holes.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

RGB_FW1AA_reflector_FLEX

author: thefreeman
Top
Bottom

2 layer board of 0.35 x 0.59 inches (9.0 x 15.0 mm)
Uploaded: May 13th 2023
Shared: May 13th 2023
Total Price: $1.00

Not tested.
Flex board that fits under the reflector and centering gasket, notches need to be made in the gasket for the LEDs.
LED : B36S3RGB, resistors : 0402

Not tested.
Flex board that fits under the reflector and centering gasket, notches need to be made in the gasket for the LEDs.
LED : B36S3RGB, resistors : 0402

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Permalink Embed link
Embeddable link to order this shared Project

BeagleBone-Serial-Console

author: pgettings
Top
Bottom

2 layer board of 2.88 x 2.30 inches (73.2 x 58.4 mm)
Uploaded: May 13th 2023
Shared: May 13th 2023
Total Price: $33.10

Add through-hole MAX3232 serial transceiver chip to serial console of a BeagleBone board. Powers BeagleBone from power pads - add screw terminal block or solder wires. RS232 serial output on DB-9 connector, and MAX3232 powered from BeagleBone, so no danger of toasting BB from serial data input. A…

Show full description

Add through-hole MAX3232 serial transceiver chip to serial console of a BeagleBone board. Powers BeagleBone from power pads - add screw terminal block or solder wires. RS232 serial output on DB-9 connector, and MAX3232 powered from BeagleBone, so no danger of toasting BB from serial data input. A…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

SRAM 28-pin Adapter

author: Dutchtronix
Top
Bottom

2 layer board of 0.79 x 1.40 inches (20.0 x 35.6 mm)
Uploaded: May 5th 2023
Shared: May 12th 2023
Total Price: $5.50

Convert any narrow 28-pin IC (0.3") to a 0.6" footprint. I'm using these with Toshiba TC55328 0.3" SRAM ICs to use on the MiniMax8085 which expects 0.6" 62256 SRAM ICs.

Convert any narrow 28-pin IC (0.3") to a 0.6" footprint. I'm using these with Toshiba TC55328 0.3" SRAM ICs to use on the MiniMax8085 which expects 0.6" 62256 SRAM ICs.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

FlexyTx_Breadboard_Breakout-v0.1e_2023-05-11

author: brandock
Top
Bottom

2 layer board of 2.02 x 1.13 inches (51.4 x 28.8 mm)
Uploaded: May 11th 2023
Shared: May 11th 2023
Total Price: $11.45

Breadboard connector for RFM69CW (and other HopeRF radios) with 3v3 power supply, FTDI connection and breakout for all RFM signals. It uses FlexyPins by SolderParty to the radio can be tested without soldering it to the board.

Breadboard connector for RFM69CW (and other HopeRF radios) with 3v3 power supply, FTDI connection and breakout for all RFM signals. It uses FlexyPins by SolderParty to the radio can be tested without soldering it to the board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

m67_button_board_v7

author: HienHuynh
Top
Bottom

2 layer board of 0.53 x 1.69 inches (13.5 x 43.0 mm)
Uploaded: May 11th 2023
Shared: May 11th 2023
Total Price: $4.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

m67_main_v7

author: HienHuynh
Top
Bottom

2 layer board of 0.80 x 2.37 inches (20.3 x 60.2 mm)
Uploaded: May 11th 2023
Shared: May 11th 2023
Total Price: $9.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

ItsyBitsy M4 Breadboard Adapter

author: CedarGrove
Top
Bottom

2 layer board of 2.50 x 0.90 inches (63.5 x 22.9 mm)
Uploaded: April 20th 2023
Shared: May 11th 2023
Total Price: $11.25

The ItsyBitsy Breadboard Adapter is an Adafruit ItsyBitsy M4 Express-compatible piggyback module that converts the 3-sided pinout of the ItsyBitsy to dual in-line for use on typical solderless breadboards and soldered protoboards. The adapter was also designed with extra solderable pin connection…

Show full description

The ItsyBitsy Breadboard Adapter is an Adafruit ItsyBitsy M4 Express-compatible piggyback module that converts the 3-sided pinout of the ItsyBitsy to dual in-line for use on typical solderless breadboards and soldered protoboards. The adapter was also designed with extra solderable pin connection…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

RF_control_board_v4.1.kicad_pcb

author: tdyson
Top
Bottom

2 layer board of 4.65 x 2.65 inches (118.1 x 67.3 mm)
Uploaded: May 10th 2023
Shared: May 10th 2023
Total Price: $61.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

SRB!

author: CodyWick13
Top
Bottom

2 layer board of 0.38 x 0.37 inches (9.6 x 9.5 mm)
Uploaded: October 21st 2022
Shared: May 10th 2023
Total Price: $0.70

this is a board that will let you press up to 4 different inputs at once with one button. ideally used with gameboy games that reset with the command st+se+a+b

uses FMN1T148

this is a board that will let you press up to 4 different inputs at once with one button. ideally used with gameboy games that reset with the command st+se+a+b

uses FMN1T148

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

EneGate V3

author: 74ls04
Top
Bottom

2 layer board of 1.81 x 1.07 inches (45.9 x 27.2 mm)
Uploaded: May 10th 2023
Shared: May 10th 2023
Total Price: $9.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

dt5202_sma_adapter_16ch

author: ohartbri
Top
Bottom

4 layer board of 6.04 x 1.16 inches (153.5 x 29.5 mm)
Uploaded: May 10th 2023
Shared: May 10th 2023
Total Price: $70.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

sipm_board_broadcom

author: ohartbri
Top
Bottom

2 layer board of 2.36 x 1.18 inches (60.0 x 30.0 mm)
Uploaded: May 9th 2023
Shared: May 9th 2023
Total Price: $13.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

sipm_board_onsemi

author: ohartbri
Top
Bottom

2 layer board of 2.36 x 1.18 inches (60.0 x 30.0 mm)
Uploaded: May 9th 2023
Shared: May 9th 2023
Total Price: $13.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

sipm_board_hamamatsu

author: ohartbri
Top
Bottom

2 layer board of 2.36 x 1.18 inches (60.0 x 30.0 mm)
Uploaded: May 9th 2023
Shared: May 9th 2023
Total Price: $13.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

NIRS_V2

author: ArielG6689
Top
Bottom

2 layer board of 0.58 x 0.58 inches (14.8 x 14.7 mm)
Uploaded: April 25th 2023
Shared: May 9th 2023
Total Price: $1.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

PDU2A_2020-08-30

author: magneon
Top
Bottom

2 layer board of 1.15 x 0.52 inches (29.2 x 13.3 mm)
Uploaded: August 30th 2020
Shared: May 8th 2023
Total Price: $3.00

Power distribution board for ant/beetle weight combat robots. Uses through-hole XT30 connectors, a 3mm LED, a surface mount resistor, and a FingerTech power switch.

Power distribution board for ant/beetle weight combat robots. Uses through-hole XT30 connectors, a 3mm LED, a surface mount resistor, and a FingerTech power switch.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

PDU2B_2020-08-30

author: magneon
Top
Bottom

2 layer board of 0.72 x 0.52 inches (18.3 x 13.3 mm)
Uploaded: August 30th 2020
Shared: May 8th 2023
Total Price: $1.85

Power distribution board for ant/beetle weight combat robots. Uses through-hole XT30 connectors, a 3mm LED, a surface mount resistor, and a FingerTech power switch.

Power distribution board for ant/beetle weight combat robots. Uses through-hole XT30 connectors, a 3mm LED, a surface mount resistor, and a FingerTech power switch.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

PCB-201 80141 84451 WBG3 Blender Controller

author: BobBabcock
Top
Bottom

4 layer board of 6.49 x 5.52 inches (164.8 x 140.2 mm)
Uploaded: May 8th 2023
Shared: May 8th 2023
Total Price: $358.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

myDRAMTester_2023-04-11

author: ovardcj
Top
Bottom

2 layer board of 2.04 x 2.10 inches (51.8 x 53.4 mm)
Uploaded: May 7th 2023
Shared: May 7th 2023
Total Price: $21.40

Credit: https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqbXRpSkhHNnUyMWxjYTJRVkI0b3EtcjZuUDFNZ3xBQ3Jtc0tsWXJPZ0VoZXVfZi1jNjJYeC1EN1ZOR1RKNFdTOG5yM0ZyVGg1aUx5Um5LYkJzVWtfZkJiNlVRdmdFZU03YWlHb25iR1cxRXd6aVlyNlFJN0dWblVETjg0WUNtbGc0bm1GRU9fbjdRMXA2SV94dDQ5WQ&q=https%3A%2F…

Show full description

Credit: https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqbXRpSkhHNnUyMWxjYTJRVkI0b3EtcjZuUDFNZ3xBQ3Jtc0tsWXJPZ0VoZXVfZi1jNjJYeC1EN1ZOR1RKNFdTOG5yM0ZyVGg1aUx5Um5LYkJzVWtfZkJiNlVRdmdFZU03YWlHb25iR1cxRXd6aVlyNlFJN0dWblVETjg0WUNtbGc0bm1GRU9fbjdRMXA2SV94dDQ5WQ&q=https%3A%2F…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2023 Oshpark LLC