OMower

By vasimv

4 layer board of 9.02 x 6.19 inches (229.2 x 157.2 mm).
Shared on January 7th, 2018 00:20

Arduino due compatible board for wheeled robots platform


OMower

By vasimv

4 layer board of 9.02 x 6.19 inches (229.2 x 157.2 mm).
Shared on January 7th, 2018 00:20

Arduino due compatible board for wheeled robots platform



Iso-IO8

By jeditekunum

2 layer board of 1.98 x 2.84 inches (50.2 x 72.2 mm).
Shared on January 6th, 2018 21:31


Iso-IO8

By jeditekunum

2 layer board of 1.98 x 2.84 inches (50.2 x 72.2 mm).
Shared on January 6th, 2018 21:31

Article



PSI Only V1.6

By Mowee

2 layer board of 1.50 x 1.15 inches (38.2 x 29.2 mm).
Shared on January 6th, 2018 21:08

R2D2 builders Teeces PSI only with serial pass-thru that also works as a breakout for CBI & DPL, with the voltage divider resistors and door switch headers. v1.6 adds voltage divider and ground test points to make sure you didn’t install R1 and R2 backwards.


PSI Only V1.6

By Mowee

2 layer board of 1.50 x 1.15 inches (38.2 x 29.2 mm).
Shared on January 6th, 2018 21:08

R2D2 builders Teeces PSI only with serial pass-thru that also works as a breakout for CBI & DPL, with the voltage divider resistors and door switch headers. v1.6 adds voltage divider and ground test points to make sure you didn’t install R1 and R2 backwards.



ZX81 ROM adapter

By Claudius

2 layer board of 0.91 x 1.71 inches (23.0 x 43.3 mm).
Shared on January 6th, 2018 20:57


ZX81 ROM adapter

By Claudius

2 layer board of 0.91 x 1.71 inches (23.0 x 43.3 mm).
Shared on January 6th, 2018 20:57



ESP8285AirStick.v01a

By PeskyProducts

4 layer board of 0.71 x 1.01 inches (17.9 x 25.6 mm).
Shared on January 6th, 2018 19:48

Swapped out MIC5219 for NCP161 LDO, added USB Micro B connector and MAX1555 for charging LiPo battery, rounded all corners.


ESP8285AirStick.v01a

By PeskyProducts

4 layer board of 0.71 x 1.01 inches (17.9 x 25.6 mm).
Shared on January 6th, 2018 19:48

Swapped out MIC5219 for NCP161 LDO, added USB Micro B connector and MAX1555 for charging LiPo battery, rounded all corners.



ESP8266FlightController.v03c

By PeskyProducts

4 layer board of 0.71 x 1.18 inches (17.9 x 29.9 mm).
Shared on January 6th, 2018 19:18

For sale at Tindie!


ESP8266FlightController.v03c

By PeskyProducts

4 layer board of 0.71 x 1.18 inches (17.9 x 29.9 mm).
Shared on January 6th, 2018 19:18

For sale at Tindie!



5554336-gerber-20171015-19954-uyw8h

By Rickymano96

2 layer board of 1.50 x 1.43 inches (38.2 x 36.2 mm).
Shared on January 6th, 2018 17:50

Music Led driver for ws2812


5554336-gerber-20171015-19954-uyw8h

By Rickymano96

2 layer board of 1.50 x 1.43 inches (38.2 x 36.2 mm).
Shared on January 6th, 2018 17:50

Music Led driver for ws2812



Maker Auto

By wyolum

2 layer board of 2.16 x 2.92 inches (54.9 x 74.0 mm).
Shared on January 6th, 2018 17:22

blinky badge for Maker Auto project


Maker Auto

By wyolum

2 layer board of 2.16 x 2.92 inches (54.9 x 74.0 mm).
Shared on January 6th, 2018 17:22

blinky badge for Maker Auto project



LED 20 Ring ATTiny

By Jens

2 layer board of 0.98 x 1.17 inches (24.8 x 29.7 mm).
Shared on January 6th, 2018 13:23

This is a small blinky with 20 LEDs powered by one CR2032 coin cell and with an ATTiny45 brain.

Hackaday.io project page

This is my “hello world” PCB on OSH Park. You like/build/iterate it? Send me a note @jens4321!

(Use “as is” at your own risk.)


LED 20 Ring ATTiny

By Jens

2 layer board of 0.98 x 1.17 inches (24.8 x 29.7 mm).
Shared on January 6th, 2018 13:23

This is a small blinky with 20 LEDs powered by one CR2032 coin cell and with an ATTiny45 brain.

Hackaday.io project page

This is my “hello world” PCB on OSH Park. You like/build/iterate it? Send me a note @jens4321!

(Use “as is” at your own risk.)



MicroSynth

By JmsPae

2 layer board of 0.60 x 0.76 inches (15.3 x 19.3 mm).
Shared on January 6th, 2018 12:48


MicroSynth

By JmsPae

2 layer board of 0.60 x 0.76 inches (15.3 x 19.3 mm).
Shared on January 6th, 2018 12:48



Pi Camera Breakout Board for Signal Analysis/MITM

By tom66

4 layer board of 1.88 x 1.25 inches (47.8 x 31.8 mm).
Shared on January 6th, 2018 09:18

Raspberry Pi Camera Snoop Board - for looking at high-speed CSI data with a scope. See CircuitMaker project “Pi Camera Breakout” for more info, including BOM. OSHW.


Pi Camera Breakout Board for Signal Analysis/MITM

By tom66

4 layer board of 1.88 x 1.25 inches (47.8 x 31.8 mm).
Shared on January 6th, 2018 09:18

Raspberry Pi Camera Snoop Board - for looking at high-speed CSI data with a scope. See CircuitMaker project “Pi Camera Breakout” for more info, including BOM. OSHW.



SparkFun microSD Sniffer

By alfishe

2 layer board of 1.86 x 1.11 inches (47.3 x 28.2 mm).
Shared on January 6th, 2018 07:13

Eagle project: https://github.com/sparkfun/MicroSD_Sniffer Manufactured: https://www.sparkfun.com/products/9419


SparkFun microSD Sniffer

By alfishe

2 layer board of 1.86 x 1.11 inches (47.3 x 28.2 mm).
Shared on January 6th, 2018 07:13

Eagle project: https://github.com/sparkfun/MicroSD_Sniffer Manufactured: https://www.sparkfun.com/products/9419



Hyd004r1_180105_1859

By neilh20

2 layer board of 6.06 x 2.24 inches (153.9 x 56.9 mm).
Shared on January 6th, 2018 03:03


Hyd004r1_180105_1859

By neilh20

2 layer board of 6.06 x 2.24 inches (153.9 x 56.9 mm).
Shared on January 6th, 2018 03:03



RFM69(H)W shield v2

By jlaraujo

2 layer board of 1.30 x 0.77 inches (32.9 x 19.6 mm).
Shared on January 6th, 2018 01:16


RFM69(H)W shield v2

By jlaraujo

2 layer board of 1.30 x 0.77 inches (32.9 x 19.6 mm).
Shared on January 6th, 2018 01:16



GreatScottLab DIY LiPo Charge/Protect/5V Boost Circuit

By WarHawk-AVG

2 layer board of 1.72 x 0.77 inches (43.7 x 19.5 mm).
Shared on January 6th, 2018 00:53

DIY LiPo Charge/Protect/5V Boost Circuit by GreatScottLab

2 layer board of 1.72 x 0.77 inches (43.7 x 19.5mm) 3 boards will cost $6.60

He will show you how he combined a couple of ICs in order to create a charge/protect/5V boost circuit for a single cell LiPo battery. Along the way he will show you how he designed the PCB, how he ordered it and what kind of problems occured while soldering the components and testing the circuit. Let’s get started!

Instructable for his design and build with howto and BOM


GreatScottLab DIY LiPo Charge/Protect/5V Boost Circuit

By WarHawk-AVG

2 layer board of 1.72 x 0.77 inches (43.7 x 19.5 mm).
Shared on January 6th, 2018 00:53

DIY LiPo Charge/Protect/5V Boost Circuit by GreatScottLab

2 layer board of 1.72 x 0.77 inches (43.7 x 19.5mm) 3 boards will cost $6.60

He will show you how he combined a couple of ICs in order to create a charge/protect/5V boost circuit for a single cell LiPo battery. Along the way he will show you how he designed the PCB, how he ordered it and what kind of problems occured while soldering the components and testing the circuit. Let’s get started!

Instructable for his design and build with howto and BOM



GE115A5 M504IO

By SensorCity

2 layer board of 5.22 x 2.84 inches (132.7 x 72.2 mm).
Shared on January 5th, 2018 22:47

GE115A5 M504 IO PCB


GE115A5 M504IO

By SensorCity

2 layer board of 5.22 x 2.84 inches (132.7 x 72.2 mm).
Shared on January 5th, 2018 22:47

GE115A5 M504 IO PCB



Tinusaur Board 3 - v3.0.2 / RC2

By boyanov

2 layer board of 0.80 x 1.40 inches (20.4 x 35.7 mm).
Shared on January 5th, 2018 22:18

This is Tinusaur Board 3 - v3.0.2 / RC2


Tinusaur Board 3 - v3.0.2 / RC2

By boyanov

2 layer board of 0.80 x 1.40 inches (20.4 x 35.7 mm).
Shared on January 5th, 2018 22:18

This is Tinusaur Board 3 - v3.0.2 / RC2



Serial Keyboard v1.kicad_pcb

By baldengineer

2 layer board of 5.49 x 3.27 inches (139.4 x 83.1 mm).
Shared on January 5th, 2018 20:07

Keyboard for Serial Buddy


Serial Keyboard v1.kicad_pcb

By baldengineer

2 layer board of 5.49 x 3.27 inches (139.4 x 83.1 mm).
Shared on January 5th, 2018 20:07

Keyboard for Serial Buddy



BAC-ZC-LDO-v4.zip

By baldengineer

2 layer board of 2.55 x 1.13 inches (64.7 x 28.6 mm).
Shared on January 5th, 2018 20:06

Zero Current Soft Power for Arduino


BAC-ZC-LDO-v4.zip

By baldengineer

2 layer board of 2.55 x 1.13 inches (64.7 x 28.6 mm).
Shared on January 5th, 2018 20:06

Zero Current Soft Power for Arduino



Switching Supply TPS563208 KEMET

By baldengineer

2 layer board of 1.78 x 0.80 inches (45.2 x 20.2 mm).
Shared on January 5th, 2018 20:06


Switching Supply TPS563208 KEMET

By baldengineer

2 layer board of 1.78 x 0.80 inches (45.2 x 20.2 mm).
Shared on January 5th, 2018 20:06