Tiny Header Board 1.2 m2
author: boyanov
2 layer board of 0.90 x 1.40 inches (23.0 x 35.7 mm)
Uploaded:
November 01, 2013
Shared:
November 01, 2013
Total Price:
$6.30
Tiny header board for the Atmel AVR ATtiny chips in DIP-8 such as ATtiny 25/45/85 (ATtiny13 as well)
The goal is to have a board that you can start using right a way, contains the minimum required components to run properly and will even let you prototype simple projects without using a breadb…
Show full description
Tiny header board for the Atmel AVR ATtiny chips in DIP-8 such as ATtiny 25/45/85 (ATtiny13 as well)
The goal is to have a board that you can start using right a way, contains the minimum required components to run properly and will even let you prototype simple projects without using a breadb…
Show full description
SOT-BoB
author: ethanharstad
2 layer board of 0.45 x 0.55 inches (11.5 x 14.1 mm)
Uploaded:
October 30, 2013
Shared:
October 30, 2013
Total Price:
$1.25
SOT23, SOT223, SC70 Breakout Board
SOT23, SOT223, SC70 Breakout Board
8p-BoB
author: ethanharstad
2 layer board of 0.45 x 0.55 inches (11.5 x 14.1 mm)
Uploaded:
October 30, 2013
Shared:
October 30, 2013
Total Price:
$1.25
8 pin SOIC/SSOP Breakout
8 pin SOIC/SSOP Breakout
smd2dip
author: jonwilhelmjr
2 layer board of 1.63 x 1.33 inches (41.4 x 33.7 mm)
Uploaded:
October 30, 2013
Shared:
October 30, 2013
Total Price:
$10.80
adapter
adapter
BeagleBoy
author: jkridner
2 layer board of 3.50 x 4.75 inches (88.9 x 120.6 mm)
Uploaded:
October 29, 2013
Shared:
October 29, 2013
Total Price:
$83.10
5.8GHz A/V FPV Transmitter
author: TimJC
2 layer board of 1.15 x 1.55 inches (29.2 x 39.4 mm)
Uploaded:
December 28, 2012
Shared:
October 29, 2013
Total Price:
$8.90
RCModelReviews.com DIY FPV Backpack
[The DIY 5.8GHz receiver can be found here](https://oshpark.co…
Show full description
RCModelReviews.com DIY FPV Backpack
[The DIY 5.8GHz receiver can be found here](https://oshpark.co…
Show full description
5.8GHz A/V FPV Receiver
author: TimJC
2 layer board of 1.05 x 2.20 inches (26.7 x 55.9 mm)
Uploaded:
December 28, 2012
Shared:
October 29, 2013
Total Price:
$11.55
RCModelReviews.com DIY FPV Backpack
[The DIY 5.8GHz transmitter can be found here](https://oshpa…
Show full description
RCModelReviews.com DIY FPV Backpack
[The DIY 5.8GHz transmitter can be found here](https://oshpa…
Show full description
RN42 Breakout Board
author: bhasden
2 layer board of 1.22 x 0.66 inches (30.9 x 16.8 mm)
Uploaded:
October 07, 2013
Shared:
October 28, 2013
Total Price:
$4.00
Breakout board for the RN42 bluetooth module.
Works.
Future revision thoughts:
- surface mount pads for resistor, capacitor, LED are a bit close together
- should mark each pins function on board.
Design from http://mbed.org/cookbook/RN-42-Bluetooth.
Breakout board for the RN42 bluetooth module.
Works.
Future revision thoughts:
- surface mount pads for resistor, capacitor, LED are a bit close together
- should mark each pins function on board.
Design from http://mbed.org/cookbook/RN-42-Bluetooth.
LCD Connector
author: Kilohercas
2 layer board of 0.79 x 0.79 inches (20.0 x 20.0 mm)
Uploaded:
October 27, 2013
Shared:
October 28, 2013
Total Price:
$3.10
HTC Desire LCD connector for probing
HTC Desire LCD connector for probing
LNW80 Doubler 3-5-8 improved replica
author: jlanier67
2 layer board of 3.69 x 4.51 inches (93.6 x 114.6 mm)
Uploaded:
September 15, 2013
Shared:
October 27, 2013
Total Price:
$83.15
An improved replica of the LNW80 doubler for the LNW80 and TRS-80 Model I, designed by Pascal Holdry. Design is copyright 2011 by Pascal Holdry, free for personal use. Please see http://home.online.no/~kr-lund/DoubleurLNW80_3-5-8.zip for more information.
An improved replica of the LNW80 doubler for the LNW80 and TRS-80 Model I, designed by Pascal Holdry. Design is copyright 2011 by Pascal Holdry, free for personal use. Please see http://home.online.no/~kr-lund/DoubleurLNW80_3-5-8.zip for more information.
HD44780 LCD Adapter
author: Frenchie
2 layer board of 0.80 x 2.00 inches (20.4 x 50.9 mm)
Uploaded:
August 20, 2013
Shared:
October 26, 2013
Total Price:
$8.05
Adapter designed to mount on the rear of a HD44780 LCD to enable easier connection of a ribbon cable.
18x1 header down to 7x2 for compatability with both regular and RGB backlit devices. If using with a standard 16 pin device, mount a 6x2 header and leave the leftmost pins (closest to JCF 2013…
Show full description
Adapter designed to mount on the rear of a HD44780 LCD to enable easier connection of a ribbon cable.
18x1 header down to 7x2 for compatability with both regular and RGB backlit devices. If using with a standard 16 pin device, mount a 6x2 header and leave the leftmost pins (closest to JCF 2013…
Show full description
AVR Based Transistor Tester
author: Frenchie
2 layer board of 1.91 x 1.38 inches (48.6 x 35.1 mm)
Uploaded:
October 26, 2013
Shared:
October 26, 2013
Total Price:
$13.20
Transistor & component tester. Based on designs from Markus Frejek, Karl-Heinz Kübbeler & Markus Reschke. http://www.mikrocontroller.net/articles/AVR_Transistortester
This version uses SMD parts and is designed to be directly soldered on the back of a 16 pin HD44780 LCD using a 0.1" pin header…
Show full description
Transistor & component tester. Based on designs from Markus Frejek, Karl-Heinz Kübbeler & Markus Reschke. http://www.mikrocontroller.net/articles/AVR_Transistortester
This version uses SMD parts and is designed to be directly soldered on the back of a 16 pin HD44780 LCD using a 0.1" pin header…
Show full description
RPi rev2 GPIO breakout board
author: myq
2 layer board of 0.65 x 1.32 inches (16.5 x 33.5 mm)
Uploaded:
October 26, 2013
Shared:
October 26, 2013
Total Price:
$4.25
Land ribbon cable from Raspberry Pi's GPIO Header in inner holes, DIP headers for breadboard in outer.
Land ribbon cable from Raspberry Pi's GPIO Header in inner holes, DIP headers for breadboard in outer.
microSD USB v1.2 for MS2K
2 layer board of 1.35 x 1.13 inches (34.3 x 28.6 mm)
Uploaded:
February 13, 2013
Shared:
October 26, 2013
Total Price:
$7.55
Test share… This is a combined uSD and USB interface for Gordon Anderson's MicroStar2000 Encoder.
Shared Mouser project to order components.
[BOM in .xls format](https://www.dropbox…
Show full description
Test share… This is a combined uSD and USB interface for Gordon Anderson's MicroStar2000 Encoder.
Shared Mouser project to order components.
[BOM in .xls format](https://www.dropbox…
Show full description
Simple TV Out
author: lazzz
2 layer board of 2.79 x 0.80 inches (70.8 x 20.3 mm)
Uploaded:
September 04, 2013
Shared:
October 25, 2013
Total Price:
$11.15
ATMEGA328-PU TV Out Atmega328 Minimal configuration with 16Mhz resonator. CR2032 will give you 10-15min of power. I'm at 10+ hrs running with 3xAAA batteries so far. Code for TV Out can be found online easily.
ATMEGA328-PU TV Out Atmega328 Minimal configuration with 16Mhz resonator. CR2032 will give you 10-15min of power. I'm at 10+ hrs running with 3xAAA batteries so far. Code for TV Out can be found online easily.
nrf24l01+ node board with Attiny84
author: kehribar
2 layer board of 1.20 x 1.20 inches (30.5 x 30.5 mm)
Uploaded:
April 25, 2013
Shared:
October 25, 2013
Total Price:
$7.20
Wireless sensor node board for nrf24l01+ RF transceiver with Attiny84.
Details can be found at: http://kehribar.me/hardware/nrf24_node/
Wireless sensor node board for nrf24l01+ RF transceiver with Attiny84.
Details can be found at: http://kehribar.me/hardware/nrf24_node/
Ethernet gateway design
author: kehribar
2 layer board of 1.81 x 1.59 inches (46.0 x 40.3 mm)
Uploaded:
September 28, 2013
Shared:
October 25, 2013
Total Price:
$14.35
Yet another ethernet gateway design.
Details can be found at: http://kehribar.me/hardware/ethernetGateway
Yet another ethernet gateway design.
Details can be found at: http://kehribar.me/hardware/ethernetGateway
