Shared Projects

Shared Projects

Crazyflie Board

author: krasin
Top
Bottom

4 layer board of 3.16 x 3.16 inches (80.2 x 80.2 mm)
Uploaded: September 23, 2013
Shared: September 23, 2013
Total Price: $99.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RasSwitcher v2.1

author: dalgibbard
Top
Bottom

2 layer board of 0.93 x 1.43 inches (23.7 x 36.2 mm)
Uploaded: September 22, 2013
Shared: September 22, 2013
Total Price: $6.65

Raspberry Pi Mounted Relay Board. Just solder a 26pin Female pin header to the underside of the Board, then the referenced parts on top. Switch by pulling GPIO17 (Pin 11) High.

[DGUnix.com - Raspberry Pi Relay Switcher](http://dgunix.com/126-modifying-a-hdmi-switcher-to-have-a-web-interface/ "…

Show full description

Raspberry Pi Mounted Relay Board. Just solder a 26pin Female pin header to the underside of the Board, then the referenced parts on top. Switch by pulling GPIO17 (Pin 11) High.

[DGUnix.com - Raspberry Pi Relay Switcher](http://dgunix.com/126-modifying-a-hdmi-switcher-to-have-a-web-interface/ "…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

xmas-icetube prototype b

author: jarchie
Top
Bottom

2 layer board of 5.57 x 1.01 inches (141.5 x 25.7 mm)
Uploaded: August 31, 2013
Shared: September 22, 2013
Total Price: $28.15

a redesign of Adafruit’s Ice Tube Clock

a redesign of Adafruit’s Ice Tube Clock

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Atmega168 Dev Board

author: myq
Top
Bottom

2 layer board of 1.10 x 2.00 inches (27.9 x 50.8 mm)
Uploaded: September 22, 2013
Shared: September 22, 2013
Total Price: $10.95

Includes headers for FTDI, I2C, ISP.
The labels for Gnd and 5v0 on the I2C Bus should be reversed.

Includes headers for FTDI, I2C, ISP.
The labels for Gnd and 5v0 on the I2C Bus should be reversed.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Raspberry Pi - PSU - Rev 3

author: gamaral
Top
Bottom

2 layer board of 1.90 x 1.65 inches (48.3 x 41.9 mm)
Uploaded: September 22, 2013
Shared: September 22, 2013
Total Price: $15.65

More Information: <http://guillermoamaral.com/read/rpi-psu-r2> GitHub Repository: <https://github.com/gamaral/rpi-pwrbtn>

Disclaimer: This board is licensed under the CERN OPEN HARDWARE LICENSE. Use at your own risk.

More Information: <http://guillermoamaral.com/read/rpi-psu-r2> GitHub Repository: <https://github.com/gamaral/rpi-pwrbtn>

Disclaimer: This board is licensed under the CERN OPEN HARDWARE LICENSE. Use at your own risk.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LED Butterfly

author: krasin
Top
Bottom

2 layer board of 3.59 x 2.66 inches (91.1 x 67.6 mm)
Uploaded: September 21, 2013
Shared: September 21, 2013
Total Price: $47.70

Yet another experiment with Eagle and LEDs

Yet another experiment with Eagle and LEDs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Spartan-6 Breakout v0.1

author: kmod
Top
Bottom

2 layer board of 1.48 x 1.48 inches (37.6 x 37.6 mm)
Uploaded: September 21, 2013
Shared: September 21, 2013
Total Price: $10.90

Experimental but cheap FPGA breakout board

Experimental but cheap FPGA breakout board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BBB-LED-GPIO-48

author: krasin
Top
Bottom

2 layer board of 2.39 x 0.60 inches (60.7 x 15.2 mm)
Uploaded: September 21, 2013
Shared: September 21, 2013
Total Price: $7.15

LED shield for BeagleBone Black (gpio48)

LED shield for BeagleBone Black (gpio48)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OLED_BOX

author: jedhodson
Top
Bottom

2 layer board of 1.54 x 2.05 inches (39.0 x 52.1 mm)
Uploaded: September 21, 2013
Shared: September 21, 2013
Total Price: $15.75

A "Box Controller" board for Freetronics OLED Display and ATmega 328P ©Jed Hodson 2013

A "Box Controller" board for Freetronics OLED Display and ATmega 328P ©Jed Hodson 2013

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

5050 Light Bar - Left

author: jjveleber
Top
Bottom

2 layer board of 0.81 x 3.11 inches (20.5 x 78.9 mm)
Uploaded: September 21, 2013
Shared: September 21, 2013
Total Price: $12.50

5050 LED Left Connector

5050 LED Left Connector

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

5050 Light Bar - Right

author: jjveleber
Top
Bottom

2 layer board of 0.81 x 3.11 inches (20.5 x 78.9 mm)
Uploaded: September 21, 2013
Shared: September 21, 2013
Total Price: $12.50

5050 LED Right Connector

5050 LED Right Connector

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

YagTracker Simple Breakout

author: goboxgizmos
Top
Bottom

2 layer board of 2.64 x 2.15 inches (67.0 x 54.6 mm)
Uploaded: September 21, 2013
Shared: September 21, 2013
Total Price: $28.35

Breakout board for the YagTracker APRS tracker. Simplifies connections to all required devices. Ideal for firmware upgrades too.

+5V regulator may not be required. Included in case your GPS needs it. Install a wire link on the bottom of the board from the output of the 7805 to the +V pin on th…

Show full description

Breakout board for the YagTracker APRS tracker. Simplifies connections to all required devices. Ideal for firmware upgrades too.

+5V regulator may not be required. Included in case your GPS needs it. Install a wire link on the bottom of the board from the output of the 7805 to the +V pin on th…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ZZZ

author: krasin
Top
Bottom

2 layer board of 0.79 x 1.00 inches (20.0 x 25.4 mm)
Uploaded: September 19, 2013
Shared: September 20, 2013
Total Price: $3.90

DDD

DDD

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Joule Thief

author: DonBindner
Top
Bottom

2 layer board of 3.05 x 0.47 inches (77.5 x 12.0 mm)
Uploaded: October 30, 2012
Shared: September 20, 2013
Total Price: $7.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RGB LED board

author: francesc
Top
Bottom

2 layer board of 0.56 x 0.70 inches (14.3 x 17.8 mm)
Uploaded: September 19, 2013
Shared: September 19, 2013
Total Price: $1.95

RGB LED board

RGB LED board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pirahna

author: viki
Top
Bottom

2 layer board of 0.89 x 0.46 inches (22.6 x 11.8 mm)
Uploaded: September 19, 2013
Shared: September 19, 2013
Total Price: $2.05

LED breakout

LED breakout

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

poker hands

author: matthewphilyaw
Top
Bottom

2 layer board of 2.05 x 1.78 inches (52.1 x 45.1 mm)
Uploaded: September 13, 2013
Shared: September 19, 2013
Total Price: $18.20

poker hand kata

poker hand kata

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Xeno-GC Clone - Rev 03

author: gamaral
Top
Bottom

2 layer board of 0.70 x 1.20 inches (17.8 x 30.5 mm)
Uploaded: September 19, 2013
Shared: September 19, 2013
Total Price: $4.20

GameCube modchip.

More information here.

Source Code

Schematic and Board files are available on GitHub.

Disclaimer: This board is li…

Show full description

GameCube modchip.

More information here.

Source Code

Schematic and Board files are available on GitHub.

Disclaimer: This board is li…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CoolRunner-II Breakout v0.1

author: kmod
Top
Bottom

2 layer board of 1.09 x 1.28 inches (27.8 x 32.5 mm)
Uploaded: September 19, 2013
Shared: September 19, 2013
Total Price: $7.00

Minimalist breakout for a small+cheap Xilinx CPLD. http://blog.kevmod.com/2013/09/cplds-prototype-and-breakout/

Minimalist breakout for a small+cheap Xilinx CPLD. http://blog.kevmod.com/2013/09/cplds-prototype-and-breakout/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB Tiny MKII Slim

author: adrian_pl
Top
Bottom

2 layer board of 2.66 x 0.87 inches (67.6 x 22.1 mm)
Uploaded: May 22, 2013
Shared: September 19, 2013
Total Price: $11.55

AVR Programmer. Project by manekinen (Poland)

Project site: http://mdiy.pl/programator-usbtiny-mkii-slim/ (in polish)

AVR Programmer. Project by manekinen (Poland)

Project site: http://mdiy.pl/programator-usbtiny-mkii-slim/ (in polish)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy