Shared Projects

Shared Projects

vga_splitter

author: Russ
Top
Bottom

2 layer board of 0.81 x 0.70 inches (20.7 x 17.9 mm)
Uploaded: December 27, 2013
Shared: December 27, 2013
Total Price: $2.85

Low bandwidth VGA splitter

Low bandwidth VGA splitter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

lcd_controller

author: Russ
Top
Bottom

2 layer board of 4.06 x 1.15 inches (103.1 x 29.2 mm)
Uploaded: December 27, 2013
Shared: December 27, 2013
Total Price: $23.25

VGA to LCD adapter with WLED driver

VGA to LCD adapter with WLED driver

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MCP23S17 8x8 SSR Matrix Driver

author: n0mjs710
Top
Bottom

2 layer board of 3.00 x 3.99 inches (76.2 x 101.3 mm)
Uploaded: December 26, 2013
Shared: December 27, 2013
Total Price: $59.80

This board uses an MCP23S17 (SPI) to control 16 Solid State Relays. It is configured to drive an 8x8 matrix, and uses a standard footprint for 1A or 2A SSRs… maybe larger. The AC input is intended to switch the hot on one bank of SSRs and neutral on the other. If you'd like to just switch 16 lo…

Show full description

This board uses an MCP23S17 (SPI) to control 16 Solid State Relays. It is configured to drive an 8x8 matrix, and uses a standard footprint for 1A or 2A SSRs… maybe larger. The AC input is intended to switch the hot on one bank of SSRs and neutral on the other. If you'd like to just switch 16 lo…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCC - January Class

author: hydronics
Top
Bottom

2 layer board of 1.15 x 0.74 inches (29.1 x 18.8 mm)
Uploaded: December 26, 2013
Shared: December 26, 2013
Total Price: $4.20

Attiny85 - Button - USB - programmer - 8806 LED strip

Attiny85 - Button - USB - programmer - 8806 LED strip

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATtiny Programmer

author: SavvyBud
Top
Bottom

2 layer board of 2.02 x 0.88 inches (51.2 x 22.3 mm)
Uploaded: December 26, 2013
Shared: December 26, 2013
Total Price: $8.85

Arduino Shield

Arduino Shield

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Robotics Toy

author: SavvyBud
Top
Bottom

2 layer board of 0.76 x 0.97 inches (19.2 x 24.6 mm)
Uploaded: May 04, 2013
Shared: December 26, 2013
Total Price: $3.65

My LED blinking toy

My LED blinking toy

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AutoQuad CAN v1.1

author: joebar
Top
Bottom

2 layer board of 0.60 x 0.67 inches (15.2 x 17.0 mm)
Uploaded: December 26, 2013
Shared: December 26, 2013
Total Price: $2.00

CAN multiport board square

( * not tested yet * )

CAN 4 port connector shield. 4 outputs, 1 input and (optional) 5V/GND feedin for esc32 power.

Multi connectors options: Micro JST-ZH 2-3-4 pins, or any 1.25mm 2-3-4 pins connector.

Daisy chain for more connections ie hexa or octo

CAN multiport board square

( * not tested yet * )

CAN 4 port connector shield. 4 outputs, 1 input and (optional) 5V/GND feedin for esc32 power.

Multi connectors options: Micro JST-ZH 2-3-4 pins, or any 1.25mm 2-3-4 pins connector.

Daisy chain for more connections ie hexa or octo

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Divergence Meter Display Board

author: cornmander
Top
Bottom

2 layer board of 6.60 x 1.50 inches (167.6 x 38.1 mm)
Uploaded: December 25, 2013
Shared: December 25, 2013
Total Price: $49.50

Nixie Tube Display Board

Nixie Tube Display Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Roomba

author: JuMi2006
Top
Bottom

2 layer board of 1.55 x 1.50 inches (39.4 x 38.1 mm)
Uploaded: December 16, 2013
Shared: December 25, 2013
Total Price: $11.60

roomba-if

roomba-if

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tiny-netduinot

author: buserror-old
Top
Bottom

2 layer board of 1.35 x 1.34 inches (34.3 x 34.0 mm)
Uploaded: December 21, 2013
Shared: December 25, 2013
Total Price: $9.00

This is mostly a "ethernet connected device" to allow network access to up to 4 relays, or LED strips for example.

It is a carrier board for one of the really cheap "Arduino Pro Mini" you can buy for 1.99 GBP on ebay.

It has a slot for a ENC28J60 ethernet module (ebay again, about 3 GBP) th…

Show full description

This is mostly a "ethernet connected device" to allow network access to up to 4 relays, or LED strips for example.

It is a carrier board for one of the really cheap "Arduino Pro Mini" you can buy for 1.99 GBP on ebay.

It has a slot for a ENC28J60 ethernet module (ebay again, about 3 GBP) th…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TPS54383 Rev-D

Top
Bottom

2 layer board of 3.63 x 1.10 inches (92.1 x 27.9 mm)
Uploaded: December 25, 2013
Shared: December 25, 2013
Total Price: $19.90

This is a dual output switching power supply based on TI's TPS54383 capable of delivering upto 3A of current on both outputs at the same time. Switching frequency is 300KHz with a 600KHz drop-in replacement also available. Take a look at my instructable for putting this together here - http://www…

Show full description

This is a dual output switching power supply based on TI's TPS54383 capable of delivering upto 3A of current on both outputs at the same time. Switching frequency is 300KHz with a 600KHz drop-in replacement also available. Take a look at my instructable for putting this together here - http://www…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mini OLED breakout

author: Zephod
Top
Bottom

2 layer board of 0.50 x 0.46 inches (12.6 x 11.7 mm)
Uploaded: December 25, 2013
Shared: December 25, 2013
Total Price: $1.10

Small breakout protoboard for -> http://www.buydisplay.com/default/mp3-oled.html

using the built in regulator. Pins/caps should be reasonably obvious if you compare it to the schematic in the "interface" datasheet. Untested so far.

Small breakout protoboard for -> http://www.buydisplay.com/default/mp3-oled.html

using the built in regulator. Pins/caps should be reasonably obvious if you compare it to the schematic in the "interface" datasheet. Untested so far.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

utftlib1

author: PaulStoffregen
Top
Bottom

2 layer board of 2.11 x 1.28 inches (53.5 x 32.4 mm)
Uploaded: December 23, 2013
Shared: December 24, 2013
Total Price: $13.40

The easy way to connect 8 or 16 bit parallel TFT displays to a Teensy 3.x board.

The easy way to connect 8 or 16 bit parallel TFT displays to a Teensy 3.x board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PowerBarB2

author: AndiceLabs
Top
Bottom

2 layer board of 0.83 x 2.15 inches (21.1 x 54.7 mm)
Uploaded: December 02, 2013
Shared: December 23, 2013
Total Price: $8.90

A BeagleBone power supply for battery use. For more information see this page.

A BeagleBone power supply for battery use. For more information see this page.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RectDoubleLongSimple-2013-12-22-15-

author: dr2chase
Top
Bottom

2 layer board of 2.84 x 0.87 inches (72.0 x 22.0 mm)
Uploaded: December 22, 2013
Shared: December 22, 2013
Total Price: $12.25

Modified Greinacher doubler, skinny. Intended to convert bicycle "generator" (sidewall or hub) to LED current. Recommend four SB540 diodes, two 1mF x 16V laid down on board, one 6.8mF x 35V at end. Be aware of dimensions to be sure it will fit in desired tube. Use painter's tape to make mo…

Show full description

Modified Greinacher doubler, skinny. Intended to convert bicycle "generator" (sidewall or hub) to LED current. Recommend four SB540 diodes, two 1mF x 16V laid down on board, one 6.8mF x 35V at end. Be aware of dimensions to be sure it will fit in desired tube. Use painter's tape to make mo…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

78

author: alfadex
Top
Bottom

2 layer board of 2.23 x 1.38 inches (56.7 x 35.2 mm)
Uploaded: December 22, 2013
Shared: December 22, 2013
Total Price: $15.45

voltage regulator

voltage regulator

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CycloneGRBLControl

author: secures
Top
Bottom

2 layer board of 3.22 x 2.71 inches (81.8 x 68.8 mm)
Uploaded: December 22, 2013
Shared: December 22, 2013
Total Price: $43.55

CNC ControlBoard for Cyclone-PCB-Factory (GRBL compatilble)

CNC ControlBoard for Cyclone-PCB-Factory (GRBL compatilble)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SOIC-8-DIL

author: Bertl
Top
Bottom

2 layer board of 0.90 x 0.40 inches (22.9 x 10.2 mm)
Uploaded: July 26, 2013
Shared: December 22, 2013
Total Price: $1.80

BGA Style SOIC-8 Adapter

BGA Style SOIC-8 Adapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SOIC-14-DIL

author: Bertl
Top
Bottom

2 layer board of 0.70 x 0.40 inches (17.8 x 10.2 mm)
Uploaded: July 09, 2013
Shared: December 22, 2013
Total Price: $1.35

BGA Style SOIC-14 Adapter

BGA Style SOIC-14 Adapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sd Adapter B V2

author: Bertl
Top
Bottom

2 layer board of 0.95 x 0.58 inches (24.0 x 14.7 mm)
Uploaded: August 30, 2013
Shared: December 22, 2013
Total Price: $2.70

MicroSD to ShortSD vB2

MicroSD to ShortSD vB2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy