Shared Projects

Shared Projects

Citadel r1

author: jjveleber
Top
Bottom

2 layer board of 5.81 x 3.91 inches (147.5 x 99.2 mm)
Uploaded: August 14th 2013
Shared: August 14th 2013
Total Price: $113.40

DMX Lighting

DMX Lighting

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

UsbVia [B1313]

author: jmedved
Top
Bottom

2 layer board of 1.27 x 0.79 inches (32.2 x 20.1 mm)
Uploaded: April 1st 2013
Shared: August 14th 2013
Total Price: $5.00

UsbVia is small board that exposes USB contacts to allow for easier multimeter measurements. There are four 2 mm connectors (two for current and two for voltage measurement) that allow for direct multimeter probe connection.

Details at [https://bitbucket.org/jmedved/usbvia/](https://bitbucket….

Show full description

UsbVia is small board that exposes USB contacts to allow for easier multimeter measurements. There are four 2 mm connectors (two for current and two for voltage measurement) that allow for direct multimeter probe connection.

Details at [https://bitbucket.org/jmedved/usbvia/](https://bitbucket….

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

UsbAmps [B1314]

author: jmedved
Top
Bottom

2 layer board of 2.13 x 0.91 inches (54.2 x 23.2 mm)
Uploaded: April 6th 2013
Shared: August 14th 2013
Total Price: $9.70

UsbAmps is a small USB pass-through device that measures current, voltage and power used by whatever is connected on its output.

Details at http://jmedved.com/usbamps/.

UsbAmps is a small USB pass-through device that measures current, voltage and power used by whatever is connected on its output.

Details at http://jmedved.com/usbamps/.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

AgIR [C1323]

author: jmedved
Top
Bottom

2 layer board of 1.50 x 0.99 inches (38.2 x 25.2 mm)
Uploaded: June 7th 2013
Shared: August 14th 2013
Total Price: $7.40

This board uses FT232RL chip and it is direct replacement for one used in Agilen'ts USB to IR cable (U1173A).

Details at http://jmedved.com/agir/.

This board uses FT232RL chip and it is direct replacement for one used in Agilen'ts USB to IR cable (U1173A).

Details at http://jmedved.com/agir/.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Scotte/Woody Motor Adapter v.1.0

author: st0ff3r
Top
Bottom

2 layer board of 3.50 x 3.26 inches (88.8 x 82.8 mm)
Uploaded: August 13th 2013
Shared: August 13th 2013
Total Price: $57.00

Adapter for Scotte/Woody Pellet Controller http://www.nbe-shop.dk/product/version-6-styring-26/

Adapter for Scotte/Woody Pellet Controller http://www.nbe-shop.dk/product/version-6-styring-26/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

GPS Speedo Adapter

author: Voltair
Top
Bottom

2 layer board of 2.69 x 0.60 inches (68.2 x 15.2 mm)
Uploaded: August 13th 2013
Shared: August 13th 2013
Total Price: $8.05

Adapt GP635 gps module to vdo electronic programmable speedometer

Adapt GP635 gps module to vdo electronic programmable speedometer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Ol' Timey Bridge

author: rstraight
Top
Bottom

2 layer board of 3.38 x 1.96 inches (85.7 x 49.9 mm)
Uploaded: August 12th 2013
Shared: August 13th 2013
Total Price: $33.10

24 volt 5 amp dc motor drive

24 volt 5 amp dc motor drive

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Breakouts

author: leewiseley
Top
Bottom

2 layer board of 3.94 x 3.94 inches (100.0 x 100.0 mm)
Uploaded: August 12th 2013
Shared: August 12th 2013
Total Price: $77.45

Breakout boards for TSSOP and SOIC

Breakout boards for TSSOP and SOIC

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

AC Dimmer Switch

author: prometa
Top
Bottom

2 layer board of 1.76 x 1.27 inches (44.8 x 32.3 mm)
Uploaded: August 12th 2013
Shared: August 12th 2013
Total Price: $11.15

Digital AC Dimmer

Digital AC Dimmer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Sunjar v1.1

author: mattmanning
Top
Bottom

2 layer board of 1.49 x 1.20 inches (37.8 x 30.5 mm)
Uploaded: August 11th 2013
Shared: August 11th 2013
Total Price: $8.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

John Stone Monster Driver V5.1

author: sampojoe
Top
Bottom

2 layer board of 4.06 x 2.78 inches (103.2 x 70.5 mm)
Uploaded: June 27th 2013
Shared: August 11th 2013
Total Price: $56.35

Energetic Forum Asymmetric motor PWM is designed to drive an N. Tesla asymmetric motor up to 100Amps and withstand radiant energy pulsing within the system. It is a driver board and is specifically designed to take input from an Arduino programmable logic chip acting as a pulse width modulation …

Show full description

Energetic Forum Asymmetric motor PWM is designed to drive an N. Tesla asymmetric motor up to 100Amps and withstand radiant energy pulsing within the system. It is a driver board and is specifically designed to take input from an Arduino programmable logic chip acting as a pulse width modulation …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Xbee breakout for Bluetooth 4.0

author: Ladvien
Top
Bottom

2 layer board of 0.98 x 1.10 inches (24.9 x 27.9 mm)
Uploaded: August 1st 2013
Shared: August 11th 2013
Total Price: $5.35

This is a Xbee breakout for the HM-10

http://www.fasttech.com/products/0/10004051/1292002-ti-cc2540-bluetooth-40-ble-2540-transparent-serial

It allows Arduino compatibility.

http://letsmakerobots.com/node/38009

This is a Xbee breakout for the HM-10

http://www.fasttech.com/products/0/10004051/1292002-ti-cc2540-bluetooth-40-ble-2540-transparent-serial

It allows Arduino compatibility.

http://letsmakerobots.com/node/38009

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

TeensyPi V5

author: jimmayhugh
Top
Bottom

2 layer board of 3.34 x 2.20 inches (84.8 x 55.9 mm)
Uploaded: August 11th 2013
Shared: August 11th 2013
Total Price: $36.70

Networked Controller

Networked Controller

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

breadboard power

author: jonwilhelmjr
Top
Bottom

2 layer board of 2.15 x 1.60 inches (54.6 x 40.7 mm)
Uploaded: August 8th 2013
Shared: August 10th 2013
Total Price: $17.20

breadboard power suppl

breadboard power suppl

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

FTDI

author: jonwilhelmjr
Top
Bottom

2 layer board of 1.90 x 1.14 inches (48.3 x 28.9 mm)
Uploaded: August 10th 2013
Shared: August 10th 2013
Total Price: $10.80

USBtoFTDI

USBtoFTDI

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Open Logic Micro

author: kuy
Top
Bottom

2 layer board of 1.11 x 1.05 inches (28.2 x 26.7 mm)
Uploaded: August 10th 2013
Shared: August 10th 2013
Total Price: $5.80

About

A Logic analyzer based on the Cypress CY7C68013A chip. 100% compatible with popular logic analyzer software supporting that chip.

Source

Find EAGLE sources, build diagrams, gerbers and BOM files…

Show full description

About

A Logic analyzer based on the Cypress CY7C68013A chip. 100% compatible with popular logic analyzer software supporting that chip.

Source

Find EAGLE sources, build diagrams, gerbers and BOM files…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

OctoWS2811 Signal & Power

author: PaulStoffregen
Top
Bottom

2 layer board of 3.21 x 3.01 inches (81.4 x 76.4 mm)
Uploaded: August 10th 2013
Shared: August 10th 2013
Total Price: $48.15

OctoWS2811 Signal & Power Breakout with 7 segment user interface for E1.31 DMX universe configuration

OctoWS2811 Signal & Power Breakout with 7 segment user interface for E1.31 DMX universe configuration

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

PIC16F1516 Development Board

author: nathanpc
Top
Bottom

2 layer board of 2.85 x 1.60 inches (72.4 x 40.6 mm)
Uploaded: August 9th 2013
Shared: August 9th 2013
Total Price: $22.80

A handy development board for the PIC16F1516

A handy development board for the PIC16F1516

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

LeafCAN LCD/OLED+ Encoder

author: Barbouri
Top
Bottom

2 layer board of 1.77 x 1.24 inches (45.0 x 31.4 mm)
Uploaded: April 2nd 2013
Shared: August 9th 2013
Total Price: $10.90

LeafCAN V2 LCD/OLED RGB Encoder SW

LeafCAN V2 LCD/OLED RGB Encoder SW

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

OpenEVSE Display V 4.2

author: Barbouri
Top
Bottom

2 layer board of 3.15 x 1.42 inches (80.0 x 36.1 mm)
Uploaded: December 30th 2012
Shared: August 9th 2013
Total Price: $22.35

Open EVSE RGB 2 wire Display with RTC

Open EVSE RGB 2 wire Display with RTC

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2023 Oshpark LLC