Shared Projects

Shared Projects

NavLights Shield v1.0

author: BennitoJuarez
Top
Bottom

2 layer board of 1.80 x 1.80 inches (45.7 x 45.7 mm)
Uploaded: December 27th 2013
Shared: December 27th 2013
Total Price: $16.20

RC RGB LED Strip Controller - Arduino Micro. Used to control LED RGB Strips by using one pin (serial data). Used mainly for multi-rotors and aircraft for night flying. Also breaks out the I/O pins for sensors and such.

RC RGB LED Strip Controller - Arduino Micro. Used to control LED RGB Strips by using one pin (serial data). Used mainly for multi-rotors and aircraft for night flying. Also breaks out the I/O pins for sensors and such.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ear

author: jordantallent
Top
Bottom

2 layer board of 1.67 x 0.82 inches (42.3 x 20.7 mm)
Uploaded: May 28th 2013
Shared: December 27th 2013
Total Price: $6.80

Ear

Ear

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino Duemilanove Peripherals

author: jordantallent
Top
Bottom

2 layer board of 2.16 x 1.81 inches (54.9 x 46.0 mm)
Uploaded: December 27th 2013
Shared: December 27th 2013
Total Price: $19.55

Arduino Duemilanove Peripherals w/ proto area

Arduino Duemilanove Peripherals w/ proto area

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Logic 2B

author: JoyMonkey
Top
Bottom

2 layer board of 2.34 x 1.52 inches (59.5 x 38.6 mm)
Uploaded: November 25th 2013
Shared: December 27th 2013
Total Price: $17.80

Modular Logic Board with 4-pin LEDs

Modular Logic Board with 4-pin LEDs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Logic Engine v0.34

author: JoyMonkey
Top
Bottom

2 layer board of 2.40 x 1.40 inches (61.0 x 35.6 mm)
Uploaded: December 15th 2013
Shared: December 27th 2013
Total Price: $16.80

now with pulldown resistors

now with pulldown resistors

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Wiegand Shield

author: RossIV
Top
Bottom

2 layer board of 2.10 x 2.34 inches (53.3 x 59.4 mm)
Uploaded: December 15th 2013
Shared: December 27th 2013
Total Price: $24.50

Arduino Shield for Wiegand Readers

Arduino Shield for Wiegand Readers

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

vga_splitter

author: Russ
Top
Bottom

2 layer board of 0.81 x 0.70 inches (20.7 x 17.9 mm)
Uploaded: December 27th 2013
Shared: December 27th 2013
Total Price: $2.85

Low bandwidth VGA splitter

Low bandwidth VGA splitter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

lcd_controller

author: Russ
Top
Bottom

2 layer board of 4.06 x 1.15 inches (103.1 x 29.2 mm)
Uploaded: December 27th 2013
Shared: December 27th 2013
Total Price: $23.25

VGA to LCD adapter with WLED driver

VGA to LCD adapter with WLED driver

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MCP23S17 8x8 SSR Matrix Driver

author: n0mjs710
Top
Bottom

2 layer board of 3.00 x 3.99 inches (76.2 x 101.3 mm)
Uploaded: December 26th 2013
Shared: December 27th 2013
Total Price: $59.80

This board uses an MCP23S17 (SPI) to control 16 Solid State Relays. It is configured to drive an 8x8 matrix, and uses a standard footprint for 1A or 2A SSRs… maybe larger. The AC input is intended to switch the hot on one bank of SSRs and neutral on the other. If you'd like to just switch 16 lo…

Show full description

This board uses an MCP23S17 (SPI) to control 16 Solid State Relays. It is configured to drive an 8x8 matrix, and uses a standard footprint for 1A or 2A SSRs… maybe larger. The AC input is intended to switch the hot on one bank of SSRs and neutral on the other. If you'd like to just switch 16 lo…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCC - January Class

author: hydronics
Top
Bottom

2 layer board of 1.15 x 0.74 inches (29.1 x 18.8 mm)
Uploaded: December 26th 2013
Shared: December 26th 2013
Total Price: $4.20

Attiny85 - Button - USB - programmer - 8806 LED strip

Attiny85 - Button - USB - programmer - 8806 LED strip

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATtiny Programmer

author: SavvyBud
Top
Bottom

2 layer board of 2.02 x 0.88 inches (51.2 x 22.3 mm)
Uploaded: December 26th 2013
Shared: December 26th 2013
Total Price: $8.85

Arduino Shield

Arduino Shield

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Robotics Toy

author: SavvyBud
Top
Bottom

2 layer board of 0.76 x 0.97 inches (19.2 x 24.6 mm)
Uploaded: May 4th 2013
Shared: December 26th 2013
Total Price: $3.65

My LED blinking toy

My LED blinking toy

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AutoQuad CAN v1.1

author: joebar
Top
Bottom

2 layer board of 0.60 x 0.67 inches (15.2 x 17.0 mm)
Uploaded: December 26th 2013
Shared: December 26th 2013
Total Price: $2.00

CAN multiport board square

( * not tested yet * )

CAN 4 port connector shield. 4 outputs, 1 input and (optional) 5V/GND feedin for esc32 power.

Multi connectors options: Micro JST-ZH 2-3-4 pins, or any 1.25mm 2-3-4 pins connector.

Daisy chain for more connections ie hexa or octo

CAN multiport board square

( * not tested yet * )

CAN 4 port connector shield. 4 outputs, 1 input and (optional) 5V/GND feedin for esc32 power.

Multi connectors options: Micro JST-ZH 2-3-4 pins, or any 1.25mm 2-3-4 pins connector.

Daisy chain for more connections ie hexa or octo

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Divergence Meter Display Board

author: cornmander
Top
Bottom

2 layer board of 6.60 x 1.50 inches (167.6 x 38.1 mm)
Uploaded: December 25th 2013
Shared: December 25th 2013
Total Price: $49.50

Nixie Tube Display Board

Nixie Tube Display Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Roomba

author: JuMi2006
Top
Bottom

2 layer board of 1.55 x 1.50 inches (39.4 x 38.1 mm)
Uploaded: December 16th 2013
Shared: December 25th 2013
Total Price: $11.60

roomba-if

roomba-if

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tiny-netduinot

author: buserror-old
Top
Bottom

2 layer board of 1.35 x 1.34 inches (34.3 x 34.0 mm)
Uploaded: December 21st 2013
Shared: December 25th 2013
Total Price: $9.00

This is mostly a "ethernet connected device" to allow network access to up to 4 relays, or LED strips for example.

It is a carrier board for one of the really cheap "Arduino Pro Mini" you can buy for 1.99 GBP on ebay.

It has a slot for a ENC28J60 ethernet module (ebay again, about 3 GBP) th…

Show full description

This is mostly a "ethernet connected device" to allow network access to up to 4 relays, or LED strips for example.

It is a carrier board for one of the really cheap "Arduino Pro Mini" you can buy for 1.99 GBP on ebay.

It has a slot for a ENC28J60 ethernet module (ebay again, about 3 GBP) th…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TPS54383 Rev-D

Top
Bottom

2 layer board of 3.63 x 1.10 inches (92.1 x 27.9 mm)
Uploaded: December 25th 2013
Shared: December 25th 2013
Total Price: $19.90

This is a dual output switching power supply based on TI's TPS54383 capable of delivering upto 3A of current on both outputs at the same time. Switching frequency is 300KHz with a 600KHz drop-in replacement also available. Take a look at my instructable for putting this together here - http://www…

Show full description

This is a dual output switching power supply based on TI's TPS54383 capable of delivering upto 3A of current on both outputs at the same time. Switching frequency is 300KHz with a 600KHz drop-in replacement also available. Take a look at my instructable for putting this together here - http://www…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mini OLED breakout

author: Zephod
Top
Bottom

2 layer board of 0.50 x 0.46 inches (12.6 x 11.7 mm)
Uploaded: December 25th 2013
Shared: December 25th 2013
Total Price: $1.10

Small breakout protoboard for -> http://www.buydisplay.com/default/mp3-oled.html

using the built in regulator. Pins/caps should be reasonably obvious if you compare it to the schematic in the "interface" datasheet. Untested so far.

Small breakout protoboard for -> http://www.buydisplay.com/default/mp3-oled.html

using the built in regulator. Pins/caps should be reasonably obvious if you compare it to the schematic in the "interface" datasheet. Untested so far.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

utftlib1

author: PaulStoffregen
Top
Bottom

2 layer board of 2.11 x 1.28 inches (53.5 x 32.4 mm)
Uploaded: December 23rd 2013
Shared: December 24th 2013
Total Price: $13.40

The easy way to connect 8 or 16 bit parallel TFT displays to a Teensy 3.x board.

The easy way to connect 8 or 16 bit parallel TFT displays to a Teensy 3.x board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PowerBarB2

author: AndiceLabs
Top
Bottom

2 layer board of 0.83 x 2.15 inches (21.1 x 54.7 mm)
Uploaded: December 2nd 2013
Shared: December 23rd 2013
Total Price: $8.90

A BeagleBone power supply for battery use. For more information see this page.

A BeagleBone power supply for battery use. For more information see this page.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC | Privacy