Shared Projects

Shared Projects

ADC Adapter Board JDIA-2483 2013530

author: jolshefsky

2 layer board of 3.59 x 2.21 inches (91.1 x 56.0 mm)
Uploaded: May 31st 2013
Shared: January 16th 2014
Total Price: $39.50

This is a basic board that allows a DVI connection to an Apple Display Connector monitor. See the main documentation at JasonDoesItAll.com for more details of the project.

This is a basic board that allows a DVI connection to an Apple Display Connector monitor. See the main documentation at JasonDoesItAll.com for more details of the project.

Embeddable link to order this shared Project

Dangerpants Labs Air Data Instrument v1.2

author: DangerpantsLabs

2 layer board of 3.21 x 2.06 inches (81.5 x 52.4 mm)
Uploaded: January 14th 2014
Shared: January 15th 2014
Total Price: $33.05

A small and lightweight instrument to display airspeed, altitude, temperature and current time. See the ADI project page for a bill of materials, instructions, firmware, and documentation. Use with BMP085.

A small and lightweight instrument to display airspeed, altitude, temperature and current time. See the ADI project page for a bill of materials, instructions, firmware, and documentation. Use with BMP085.

Embeddable link to order this shared Project

8-SOIC/EP Breakout Board

author: Eric

2 layer board of 0.51 x 0.41 inches (12.9 x 10.3 mm)
Uploaded: October 9th 2013
Shared: January 15th 2014
Total Price: $1.00

Cost: $1.00 for three.

Description:

Breakout board for 8-SOIC/EP package. Converts 8-SOIC/EP to breadboard-friendly 0.1-inch pitch by 0.4-inch width through-hole format.

Wide traces on all pins, suitable for use with power packages. For ICs with exposed pad, it is provid…

Show full description

Cost: $1.00 for three.

Description:

Breakout board for 8-SOIC/EP package. Converts 8-SOIC/EP to breadboard-friendly 0.1-inch pitch by 0.4-inch width through-hole format.

Wide traces on all pins, suitable for use with power packages. For ICs with exposed pad, it is provid…

Show full description

Embeddable link to order this shared Project

SOT-23 & SOT-3X3 Breakout Board

author: Eric

2 layer board of 0.41 x 0.31 inches (10.3 x 7.8 mm)
Uploaded: January 15th 2014
Shared: January 15th 2014
Total Price: $0.60

UPDATED!

Cost: $0.60 for three.

Description:

Breakout board for SOT-23, SOT-323, SOT-343, SOT-353 and SOT-363 packages. Converts these 3, 4, 5 and 6-pin SMD components to breadboard-friendly 0.1-inch pitch by 0.3-inch width through-hole format. Pins numbered for quick r…

Show full description

UPDATED!

Cost: $0.60 for three.

Description:

Breakout board for SOT-23, SOT-323, SOT-343, SOT-353 and SOT-363 packages. Converts these 3, 4, 5 and 6-pin SMD components to breadboard-friendly 0.1-inch pitch by 0.3-inch width through-hole format. Pins numbered for quick r…

Show full description

Embeddable link to order this shared Project

Real Time Clock and Sensor Shield

author: jtilghman

2 layer board of 2.70 x 2.10 inches (68.6 x 53.3 mm)
Uploaded: January 6th 2014
Shared: January 15th 2014
Total Price: $28.30

DS1307 Real Time Clock and Sensor Shield

Needed some place to plug in my PING)))'s and wheel encoders for my robot. Thought I would add an RTC while I was at it.

This is my 1st PC board, and I haven't received the board yet so this isn't tested.

DS1307 Real Time Clock and Sensor Shield

Needed some place to plug in my PING)))'s and wheel encoders for my robot. Thought I would add an RTC while I was at it.

This is my 1st PC board, and I haven't received the board yet so this isn't tested.

Embeddable link to order this shared Project

LiPo Charger

author: Lukaszp

2 layer board of 1.44 x 1.10 inches (36.5 x 27.9 mm)
Uploaded: January 15th 2014
Shared: January 15th 2014
Total Price: $7.90

MCP73833 LiPo batty charger

MCP73833 LiPo batty charger

Embeddable link to order this shared Project

CAN2USB v2

author: Lukaszp

2 layer board of 1.92 x 1.61 inches (48.7 x 40.9 mm)
Uploaded: January 13th 2014
Shared: January 15th 2014
Total Price: $15.40

ATMega32m1 with CANBUS and USB iface

ATMega32m1 with CANBUS and USB iface

Embeddable link to order this shared Project

Led matrix display - Model A

2 layer board of 4.80 x 0.70 inches (122.0 x 17.8 mm)
Uploaded: January 5th 2014
Shared: January 15th 2014
Total Price: $16.80

Alarm clock led matrix display PCB. Projects details at bfrigon.com/alarm-clock

Alarm clock led matrix display PCB. Projects details at bfrigon.com/alarm-clock

Embeddable link to order this shared Project

HTPC Front panel

2 layer board of 9.02 x 1.65 inches (229.1 x 41.9 mm)
Uploaded: January 15th 2014
Shared: January 15th 2014
Total Price: $74.35

Front panel PCB for a Scientific Atlanta Explorer 2000 case.

Project details at bfrigon.com/htpc

Front panel PCB for a Scientific Atlanta Explorer 2000 case.

Project details at bfrigon.com/htpc

Embeddable link to order this shared Project

dAISy Rev A

author: chicken

2 layer board of 1.05 x 0.98 inches (26.8 x 24.9 mm)
Uploaded: July 21st 2013
Shared: January 14th 2014
Total Price: $5.15

Breakout for Si4362 for building a basic AIS receiver. More on github and 43oh. Errors: Holes for headers are too tight, GPIO 0 and 1 are swapped, pull-down on SDO missing. Fixed in [RevB](h…

Show full description

Breakout for Si4362 for building a basic AIS receiver. More on github and 43oh. Errors: Holes for headers are too tight, GPIO 0 and 1 are swapped, pull-down on SDO missing. Fixed in [RevB](h…

Show full description

Embeddable link to order this shared Project

KarmaDrive PCB Mount Pots v2.2 1_14_14

author: Vick

2 layer board of 1.38 x 1.48 inches (35.0 x 37.5 mm)
Uploaded: January 14th 2014
Shared: January 14th 2014
Total Price: $10.15

Reddit diypedal zen clone

Reddit diypedal zen clone

Embeddable link to order this shared Project

KARMADRIVE V2.2 1_14_14

author: Vick

2 layer board of 1.74 x 1.20 inches (44.2 x 30.5 mm)
Uploaded: January 14th 2014
Shared: January 14th 2014
Total Price: $10.40

Reddit DIY pedla project ZenClo

Reddit DIY pedla project ZenClo

Embeddable link to order this shared Project

avr synthesizer

author: clippy

2 layer board of 2.84 x 2.02 inches (72.1 x 51.2 mm)
Uploaded: January 14th 2014
Shared: January 14th 2014
Total Price: $28.55

avr xmega synth

avr xmega synth

Embeddable link to order this shared Project

PDB test V6

author: legolyle

2 layer board of 1.50 x 3.00 inches (38.1 x 76.2 mm)
Uploaded: January 13th 2014
Shared: January 14th 2014
Total Price: $22.50

power distribution test board iteration 6

power distribution test board iteration 6

Embeddable link to order this shared Project

USB Night Light

author: buserror-old

2 layer board of 0.85 x 0.48 inches (21.7 x 12.2 mm)
Uploaded: January 13th 2014
Shared: January 13th 2014
Total Price: $2.00

This board takes power from a USB port (typically a wall charger). It uses a 904nm IR thru hole LED as a photosensor, and when it detects 'night' it starts doing a very very gentle mix of the two LED on the board. I use these with a ping-pong ball as a diffuser, and a blue + red LED. I've been …

Show full description

This board takes power from a USB port (typically a wall charger). It uses a 904nm IR thru hole LED as a photosensor, and when it detects 'night' it starts doing a very very gentle mix of the two LED on the board. I use these with a ping-pong ball as a diffuser, and a blue + red LED. I've been …

Show full description

Embeddable link to order this shared Project

SSOP-20 Soldering Practice

author: nmz787

2 layer board of 0.99 x 1.00 inches (25.2 x 25.5 mm)
Uploaded: January 13th 2014
Shared: January 13th 2014
Total Price: $4.95

A board to practice surface-mount soldering, the back side is a ground plane to make it more challenging.

A board to practice surface-mount soldering, the back side is a ground plane to make it more challenging.

Embeddable link to order this shared Project

FTDI BFX

author: oPossum

2 layer board of 0.72 x 1.23 inches (18.3 x 31.2 mm)
Uploaded: June 12th 2012
Shared: January 13th 2014
Total Price: $4.40

FTDI FT231X USB to Serial

FTDI FT231X USB to Serial

Embeddable link to order this shared Project

Seven Segment LED with Shift Register

author: oPossum

2 layer board of 0.80 x 1.10 inches (20.3 x 27.9 mm)
Uploaded: January 9th 2014
Shared: January 13th 2014
Total Price: $4.40

0.8 inch Seven Segment LED with CD4094 Shift Register - Single Rev2

0.8 inch Seven Segment LED with CD4094 Shift Register - Single Rev2

Embeddable link to order this shared Project

Dual 7 seg shift reg r2

author: oPossum

2 layer board of 1.60 x 1.10 inches (40.6 x 27.9 mm)
Uploaded: January 11th 2014
Shared: January 13th 2014
Total Price: $8.80

Dual 0.8 inch Seven Segment with CD4094 Shift Registers Rev2

Dual 0.8 inch Seven Segment with CD4094 Shift Registers Rev2

Embeddable link to order this shared Project

DX6i auto timer mod

author: sokol

2 layer board of 0.81 x 1.36 inches (20.5 x 34.4 mm)
Uploaded: January 12th 2014
Shared: January 12th 2014
Total Price: $5.45

Embeddable link to order this shared Project