OLED_BOX
author: jedhodson
2 layer board of 1.54 x 2.05 inches (39.0 x 52.1 mm)
Uploaded:
September 21st 2013
Shared:
September 21st 2013
Total Price:
$15.75
A "Box Controller" board for Freetronics OLED Display and ATmega 328P ©Jed Hodson 2013
A "Box Controller" board for Freetronics OLED Display and ATmega 328P ©Jed Hodson 2013
YagTracker Simple Breakout
author: goboxgizmos
2 layer board of 2.64 x 2.15 inches (67.0 x 54.6 mm)
Uploaded:
September 21st 2013
Shared:
September 21st 2013
Total Price:
$28.35
Breakout board for the YagTracker APRS tracker. Simplifies connections to all required devices. Ideal for firmware upgrades too.
+5V regulator may not be required. Included in case your GPS needs it. Install a wire link on the bottom of the board from the output of the 7805 to the +V pin on th…
Show full description
Breakout board for the YagTracker APRS tracker. Simplifies connections to all required devices. Ideal for firmware upgrades too.
+5V regulator may not be required. Included in case your GPS needs it. Install a wire link on the bottom of the board from the output of the 7805 to the +V pin on th…
Show full description
Joule Thief
author: DonBindner
2 layer board of 3.05 x 0.47 inches (77.5 x 12.0 mm)
Uploaded:
October 30th 2012
Shared:
September 20th 2013
Total Price:
$7.20
poker hands
author: matthewphilyaw
2 layer board of 2.05 x 1.78 inches (52.1 x 45.1 mm)
Uploaded:
September 13th 2013
Shared:
September 19th 2013
Total Price:
$18.20
poker hand kata
poker hand kata
Xeno-GC Clone - Rev 03
author: gamaral
2 layer board of 0.70 x 1.20 inches (17.8 x 30.5 mm)
Uploaded:
September 19th 2013
Shared:
September 19th 2013
Total Price:
$4.20
Show full description
Show full description
CoolRunner-II Breakout v0.1
author: kmod
2 layer board of 1.09 x 1.28 inches (27.8 x 32.5 mm)
Uploaded:
September 19th 2013
Shared:
September 19th 2013
Total Price:
$7.00
Minimalist breakout for a small+cheap Xilinx CPLD. http://blog.kevmod.com/2013/09/cplds-prototype-and-breakout/
Minimalist breakout for a small+cheap Xilinx CPLD. http://blog.kevmod.com/2013/09/cplds-prototype-and-breakout/
USB Tiny MKII Slim
author: adrian_pl
2 layer board of 2.66 x 0.87 inches (67.6 x 22.1 mm)
Uploaded:
May 22nd 2013
Shared:
September 19th 2013
Total Price:
$11.55
AVR Programmer. Project by manekinen (Poland)
Project site: http://mdiy.pl/programator-usbtiny-mkii-slim/ (in polish)
AVR Programmer. Project by manekinen (Poland)
Project site: http://mdiy.pl/programator-usbtiny-mkii-slim/ (in polish)
TPS7A4700 v1.2
author: bwshockley
2 layer board of 1.58 x 0.79 inches (40.0 x 20.0 mm)
Uploaded:
September 10th 2013
Shared:
September 18th 2013
Total Price:
$6.20
Tc4 Controller 0400
author: rustic_roaster
2 layer board of 2.25 x 2.10 inches (57.2 x 53.4 mm)
Uploaded:
September 17th 2013
Shared:
September 18th 2013
Total Price:
$23.60
tc4 v4.0 HRO.org 4 port Open Source thermal coupler Arduino Shield. TC4 Archive location TC4
Board loaded here from Archive on 17-sept-2013 and h…
Show full description
tc4 v4.0 HRO.org 4 port Open Source thermal coupler Arduino Shield. TC4 Archive location TC4
Board loaded here from Archive on 17-sept-2013 and h…
Show full description
Dynamo Charger
author: hydronics
2 layer board of 1.62 x 1.19 inches (41.0 x 30.3 mm)
Uploaded:
September 17th 2013
Shared:
September 17th 2013
Total Price:
$9.60
Dynamo Charger with diode bridge LED light connections (white power LEDs, red and amber leds with optional resistor), a circuit protection transistor with diode that drains to a 3W resistor over 6.2volts DC.
Dynamo Charger with diode bridge LED light connections (white power LEDs, red and amber leds with optional resistor), a circuit protection transistor with diode that drains to a 3W resistor over 6.2volts DC.
4WIRE-7SEG
author: MARLYNZ
2 layer board of 1.30 x 1.00 inches (33.1 x 25.4 mm)
Uploaded:
September 16th 2013
Shared:
September 16th 2013
Total Price:
$6.50
4-cond./3.5mm to SPI 8-char. LED driver. U2=MAX7221 (or equiv.), U1=MAX9075, DD=BAS70-05, SJ-43514, C4=.1uF, R4=100K, R1-R2=10K, R3=3.3K, R5=22K. Data or Clock=High -> Load=Low. 1) Bring Data high. 2) Clock out the data. (Clock keeps Load low if all data = 0.) 3) Stop - bring both clock and …
Show full description
4-cond./3.5mm to SPI 8-char. LED driver. U2=MAX7221 (or equiv.), U1=MAX9075, DD=BAS70-05, SJ-43514, C4=.1uF, R4=100K, R1-R2=10K, R3=3.3K, R5=22K. Data or Clock=High -> Load=Low. 1) Bring Data high. 2) Clock out the data. (Clock keeps Load low if all data = 0.) 3) Stop - bring both clock and …
Show full description