Shared Projects

Shared Projects

AVR Component tester

author: adnc

2 layer board of 2.21 x 2.64 inches (56.0 x 67.0 mm)
Uploaded: November 19th 2013
Shared: January 30th 2014
Total Price: $29.05

Embeddable link to order this shared Project

noWire_Bluetooth

author: mfonte

2 layer board of 2.04 x 2.34 inches (51.7 x 59.5 mm)
Uploaded: January 29th 2014
Shared: January 30th 2014
Total Price: $23.80

This module connects to Android over Bluetooth and the user can control a relay from an APP installed on the smartphone.

Microcontroller: ATMEL Attiny85

For more details: [email protected]

This module connects to Android over Bluetooth and the user can control a relay from an APP installed on the smartphone.

Microcontroller: ATMEL Attiny85

For more details: [email protected]

Embeddable link to order this shared Project

High/Low driver v 0.1

author: rusefi

2 layer board of 1.71 x 0.61 inches (43.5 x 15.6 mm)
Uploaded: January 30th 2014
Shared: January 30th 2014
Total Price: $5.25

Embeddable link to order this shared Project

Breadboard ISP Header

author: brodyf42

2 layer board of 0.46 x 0.36 inches (11.6 x 9.0 mm)
Uploaded: January 30th 2014
Shared: January 30th 2014
Total Price: $0.80

Embeddable link to order this shared Project

Breadboard power

author: brodyf42

2 layer board of 0.61 x 1.13 inches (15.4 x 28.7 mm)
Uploaded: January 29th 2014
Shared: January 30th 2014
Total Price: $3.40

Embeddable link to order this shared Project

Pinoccio Motion Backpack v0.1

author: Allison-Clift-Jennings

2 layer board of 1.01 x 1.69 inches (25.6 x 42.9 mm)
Uploaded: September 27th 2013
Shared: January 30th 2014
Total Price: $8.50

Pinoccio Motion Backpack v0.1

Pinoccio Motion Backpack v0.1

Embeddable link to order this shared Project

DB-9F null modem

author: nsayer

2 layer board of 0.65 x 0.60 inches (16.5 x 15.3 mm)
Uploaded: January 29th 2014
Shared: January 29th 2014
Total Price: $1.95

RS-232 null modem adapter board.

Edge-solder two DB9F connectors on either side of the board (DigiKey 4209FE-ND, for instance) and you get an RS-232 null modem. The pinout:

  • TXD<->RXD
  • RTS<->CTS
  • GND<->GND
  • DTR->DSR+DCD (x2)
  • RI->nc (x2)

RS-232 null modem adapter board.

Edge-solder two DB9F connectors on either side of the board (DigiKey 4209FE-ND, for instance) and you get an RS-232 null modem. The pinout:

  • TXD<->RXD
  • RTS<->CTS
  • GND<->GND
  • DTR->DSR+DCD (x2)
  • RI->nc (x2)
Embeddable link to order this shared Project

mBgc_Mini_Tc4452

author: Brodziek

2 layer board of 1.26 x 0.75 inches (31.9 x 19.0 mm)
Uploaded: October 28th 2013
Shared: January 29th 2014
Total Price: $4.70

Mini Brushless Gimbal Controler. Oryginal Idea by OlliW

Mini Brushless Gimbal Controler. Oryginal Idea by OlliW

Embeddable link to order this shared Project

7 Seg Board

author: nathanjshaffer

2 layer board of 2.37 x 0.42 inches (60.2 x 10.7 mm)
Uploaded: January 29th 2014
Shared: January 29th 2014
Total Price: $4.95

Embeddable link to order this shared Project

OpenROV CTrl 2.6 tester Rev A

author: scubasonar

2 layer board of 1.01 x 1.24 inches (25.6 x 31.4 mm)
Uploaded: January 29th 2014
Shared: January 29th 2014
Total Price: $6.20

Add a i2c ADC to your OpenRov Control Board V 2.6 or 2.5 and test the boards power supplies and i2c.

Add a i2c ADC to your OpenRov Control Board V 2.6 or 2.5 and test the boards power supplies and i2c.

Embeddable link to order this shared Project

Sounds with ATmega128

author: jronen

2 layer board of 1.08 x 1.08 inches (27.4 x 27.4 mm)
Uploaded: September 29th 2013
Shared: January 29th 2014
Total Price: $5.75

Create up to four sounds and trigger them by pressing buttons

Create up to four sounds and trigger them by pressing buttons

Embeddable link to order this shared Project

HRM_2L

author: Jamieson

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: January 29th 2014
Shared: January 29th 2014
Total Price: $5.00

This board receives the signal from a wireless heart rate transmitter chest strap. It outputs a 10ms TTL level pulse with each heart beat. Tested with Polar T31 (uncoded) and H1 (coded) 5.5kHz transmitter straps.

This board receives the signal from a wireless heart rate transmitter chest strap. It outputs a 10ms TTL level pulse with each heart beat. Tested with Polar T31 (uncoded) and H1 (coded) 5.5kHz transmitter straps.

Embeddable link to order this shared Project

Scramjet_V1.1

author: NeonSilicon

2 layer board of 1.95 x 1.79 inches (49.4 x 45.3 mm)
Uploaded: September 26th 2013
Shared: January 29th 2014
Total Price: $17.35

Distortion with Mosfet based clipping section. Documentation is available here.

Distortion with Mosfet based clipping section. Documentation is available here.

Embeddable link to order this shared Project

Feral IR 0.8.5.0

author: thatdecade

2 layer board of 1.80 x 0.29 inches (45.8 x 7.4 mm)
Uploaded: January 28th 2014
Shared: January 28th 2014
Total Price: $2.60

Lasertag compatible health sensor. Board sized to replace the pcb in a flashing bike light housing.

More Info: http://lt-mmo.blogspot.com/search/label/Feral%20IR%20Sensor

Lasertag compatible health sensor. Board sized to replace the pcb in a flashing bike light housing.

More Info: http://lt-mmo.blogspot.com/search/label/Feral%20IR%20Sensor

Embeddable link to order this shared Project

ULA CPLD

author: fbelavenuto

2 layer board of 1.06 x 2.25 inches (27.0 x 57.0 mm)
Uploaded: October 10th 2013
Shared: January 28th 2014
Total Price: $11.90

Clone ULA TK90X e TK95

Project details: http://www.victortrucco.com/TK/ULATKCPLD/ULACPLD_Altera.zip

Clone ULA TK90X e TK95

Project details: http://www.victortrucco.com/TK/ULATKCPLD/ULACPLD_Altera.zip

Embeddable link to order this shared Project

Big Red Driver - V2

author: msds

2 layer board of 2.04 x 1.60 inches (51.8 x 40.6 mm)
Uploaded: November 10th 2013
Shared: January 28th 2014
Total Price: $16.30

This board is a meta-breakout board for Pololu's DRV8825 stepper driver module, designed to hold a custom-machined heatsink, capacitor, screw-terminal connectors, and an indicator LED for fault conditions.

  • C1 is a Panasonic H13 100µF 63V electrolytic …

Show full description

This board is a meta-breakout board for Pololu's DRV8825 stepper driver module, designed to hold a custom-machined heatsink, capacitor, screw-terminal connectors, and an indicator LED for fault conditions.

  • C1 is a Panasonic H13 100µF 63V electrolytic …

Show full description

Embeddable link to order this shared Project

AD8495 K-Type Thermocouple Amplifier

author: Eric

2 layer board of 1.15 x 0.64 inches (29.1 x 16.1 mm)
Uploaded: January 28th 2014
Shared: January 28th 2014
Total Price: $3.60

Cost: $3.60 for three.

Description:

Breakout board for the Analog Devices AD8495CRMZ K-Type Thermocouple Amplifier. This IC reads thermocouple input and scales it to 5mV (0.005V) per °C (plus a 1.25V reference offset). This output can be read by a microcontroller or a mult…

Show full description

Cost: $3.60 for three.

Description:

Breakout board for the Analog Devices AD8495CRMZ K-Type Thermocouple Amplifier. This IC reads thermocouple input and scales it to 5mV (0.005V) per °C (plus a 1.25V reference offset). This output can be read by a microcontroller or a mult…

Show full description

Embeddable link to order this shared Project

LED Driver v1.1

author: Duke

2 layer board of 1.00 x 0.80 inches (25.4 x 20.3 mm)
Uploaded: January 2nd 2013
Shared: January 28th 2014
Total Price: $4.00

Embeddable link to order this shared Project

16-bit port expander with 74HC595D

author: nochkin

2 layer board of 1.14 x 2.05 inches (28.9 x 52.1 mm)
Uploaded: January 27th 2014
Shared: January 27th 2014
Total Price: $11.65

Embeddable link to order this shared Project

LPC11U24 Gadget

author: kuy

2 layer board of 0.60 x 1.49 inches (15.3 x 37.8 mm)
Uploaded: November 7th 2013
Shared: January 27th 2014
Total Price: $4.45

PCB for the LPC11U24 Gadget project. Contains a USB-connected NXP LPC11U24 microcontroller and an integrated ARM debugger. BOM and build instructions TBD.

Photo

[Photo and Announcement](htt…

Show full description

PCB for the LPC11U24 Gadget project. Contains a USB-connected NXP LPC11U24 microcontroller and an integrated ARM debugger. BOM and build instructions TBD.

Photo

[Photo and Announcement](htt…

Show full description

Embeddable link to order this shared Project