Shared Projects

Shared Projects

Lord Fader

author: 1oooop
Top
Bottom

2 layer board of 6.50 x 1.90 inches (165.2 x 48.4 mm)
Uploaded: September 23rd 2013
Shared: September 23rd 2013
Total Price: $61.90

5V CC SPI LED Driver with modified Arduino (Dubbed BruteforcedurinoV2_nA(for no "good" analog functionality))

5V CC SPI LED Driver with modified Arduino (Dubbed BruteforcedurinoV2_nA(for no "good" analog functionality))

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Crazyflie Board

author: krasin
Top
Bottom

4 layer board of 3.16 x 3.16 inches (80.2 x 80.2 mm)
Uploaded: September 23rd 2013
Shared: September 23rd 2013
Total Price: $99.70

Unmodified Crazyflie quadcopter control board taken from [https://bitbucket.org/bitcraze/crazyflie-electronics]…

Unmodified Crazyflie quadcopter control board taken from [https://bitbucket.org/bitcraze/crazyflie-electronics]…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

RasSwitcher v2.1

author: dalgibbard
Top
Bottom

2 layer board of 0.93 x 1.43 inches (23.7 x 36.2 mm)
Uploaded: September 22nd 2013
Shared: September 22nd 2013
Total Price: $6.65

Raspberry Pi Mounted Relay Board. Just solder a 26pin Female pin header to the underside of the Board, then the referenced parts on top. Switch by pulling GP…

Raspberry Pi Mounted Relay Board. Just solder a 26pin Female pin header to the underside of the Board, then the referenced parts on top. Switch by pulling GP…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

xmas-icetube prototype b

author: jarchie
Top
Bottom

2 layer board of 5.57 x 1.01 inches (141.5 x 25.7 mm)
Uploaded: August 31st 2013
Shared: September 22nd 2013
Total Price: $28.15

a redesign of Adafruit’s Ice Tube Clock

a redesign of Adafruit’s Ice Tube Clock

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Atmega168 Dev Board

author: myq
Top
Bottom

2 layer board of 1.10 x 2.00 inches (27.9 x 50.8 mm)
Uploaded: September 22nd 2013
Shared: September 22nd 2013
Total Price: $10.95

Includes headers for FTDI, I2C, ISP.
The labels for Gnd and 5v0 on the I2C Bus should be reversed.

Includes headers for FTDI, I2C, ISP.
The labels for Gnd and 5v0 on the I2C Bus should be reversed.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Raspberry Pi - PSU - Rev 3

author: gamaral
Top
Bottom

2 layer board of 1.90 x 1.65 inches (48.3 x 41.9 mm)
Uploaded: September 22nd 2013
Shared: September 22nd 2013
Total Price: $15.65

More Information: <http://guillermoamaral.com/read/rpi-psu-r2> GitHub Repository: <https://github.com/gamaral/rpi-pwrbtn>

Disclaimer: This board is licen…

More Information: <http://guillermoamaral.com/read/rpi-psu-r2> GitHub Repository: <https://github.com/gamaral/rpi-pwrbtn>

Disclaimer: This board is licen…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

LED Butterfly

author: krasin
Top
Bottom

2 layer board of 3.59 x 2.66 inches (91.1 x 67.6 mm)
Uploaded: September 21st 2013
Shared: September 21st 2013
Total Price: $47.70

Yet another experiment with Eagle and LEDs

Yet another experiment with Eagle and LEDs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Spartan-6 Breakout v0.1

author: kmod
Top
Bottom

2 layer board of 1.48 x 1.48 inches (37.6 x 37.6 mm)
Uploaded: September 21st 2013
Shared: September 21st 2013
Total Price: $10.90

Experimental but cheap FPGA breakout board

Experimental but cheap FPGA breakout board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

BBB-LED-GPIO-48

author: krasin
Top
Bottom

2 layer board of 2.39 x 0.60 inches (60.7 x 15.2 mm)
Uploaded: September 21st 2013
Shared: September 21st 2013
Total Price: $7.15

LED shield for BeagleBone Black (gpio48)

LED shield for BeagleBone Black (gpio48)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

OLED_BOX

author: jedhodson
Top
Bottom

2 layer board of 1.54 x 2.05 inches (39.0 x 52.1 mm)
Uploaded: September 21st 2013
Shared: September 21st 2013
Total Price: $15.75

A "Box Controller" board for Freetronics OLED Display and ATmega 328P ©Jed Hodson 2013

A "Box Controller" board for Freetronics OLED Display and ATmega 328P ©Jed Hodson 2013

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

5050 Light Bar - Left

author: jjveleber
Top
Bottom

2 layer board of 0.81 x 3.11 inches (20.5 x 78.9 mm)
Uploaded: September 21st 2013
Shared: September 21st 2013
Total Price: $12.50

5050 LED Left Connector

5050 LED Left Connector

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

5050 Light Bar - Right

author: jjveleber
Top
Bottom

2 layer board of 0.81 x 3.11 inches (20.5 x 78.9 mm)
Uploaded: September 21st 2013
Shared: September 21st 2013
Total Price: $12.50

5050 LED Right Connector

5050 LED Right Connector

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

YagTracker Simple Breakout

author: goboxgizmos
Top
Bottom

2 layer board of 2.64 x 2.15 inches (67.0 x 54.6 mm)
Uploaded: September 21st 2013
Shared: September 21st 2013
Total Price: $28.35

Breakout board for the YagTracker APRS tracker. Simplifies connections to all required devices. Ideal for firmware upgrades too.

+5V regulator may not be …

Breakout board for the YagTracker APRS tracker. Simplifies connections to all required devices. Ideal for firmware upgrades too.

+5V regulator may not be …

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

ZZZ

author: krasin
Top
Bottom

2 layer board of 0.79 x 1.00 inches (20.0 x 25.4 mm)
Uploaded: September 19th 2013
Shared: September 20th 2013
Total Price: $3.90

DDD

DDD

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Joule Thief

author: DonBindner
Top
Bottom

2 layer board of 3.05 x 0.47 inches (77.5 x 12.0 mm)
Uploaded: October 30th 2012
Shared: September 20th 2013
Total Price: $7.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

RGB LED board

author: francesc
Top
Bottom

2 layer board of 0.56 x 0.70 inches (14.3 x 17.8 mm)
Uploaded: September 19th 2013
Shared: September 19th 2013
Total Price: $1.95

RGB LED board

RGB LED board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Pirahna

author: viki
Top
Bottom

2 layer board of 0.89 x 0.46 inches (22.6 x 11.8 mm)
Uploaded: September 19th 2013
Shared: September 19th 2013
Total Price: $2.05

LED breakout

LED breakout

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

poker hands

author: matthewphilyaw
Top
Bottom

2 layer board of 2.05 x 1.78 inches (52.1 x 45.1 mm)
Uploaded: September 13th 2013
Shared: September 19th 2013
Total Price: $18.20

poker hand kata

poker hand kata

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Xeno-GC Clone - Rev 03

author: gamaral
Top
Bottom

2 layer board of 0.70 x 1.20 inches (17.8 x 30.5 mm)
Uploaded: September 19th 2013
Shared: September 19th 2013
Total Price: $4.20

GameCube modchip.

More information here.

[Source Code](http://www.gc-forever.com/forums/viewtopi…

GameCube modchip.

More information here.

[Source Code](http://www.gc-forever.com/forums/viewtopi…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

CoolRunner-II Breakout v0.1

author: kmod
Top
Bottom

2 layer board of 1.09 x 1.28 inches (27.8 x 32.5 mm)
Uploaded: September 19th 2013
Shared: September 19th 2013
Total Price: $7.00

Minimalist breakout for a small+cheap Xilinx CPLD. [http://blog.kevmod.com/2013/09/cplds-prototype-and-breakout/](http://blog.kevmod.com/2013/09/cplds-protot…

Minimalist breakout for a small+cheap Xilinx CPLD. [http://blog.kevmod.com/2013/09/cplds-prototype-and-breakout/](http://blog.kevmod.com/2013/09/cplds-protot…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project
Whaleshark white