Shared Projects

Shared Projects

Jason's LED Chaser

author: OldCrow

2 layer board of 1.70 x 1.48 inches (43.2 x 37.5 mm)
Uploaded: April 5th 2014
Shared: April 6th 2014
Total Price: $12.50

My son's first PCB layout

My son's first PCB layout

Embeddable link to order this shared Project

LASER SYNC

author: Griffin

4 layer board of 2.46 x 1.66 inches (62.4 x 42.1 mm)
Uploaded: April 6th 2014
Shared: April 6th 2014
Total Price: $40.60

Syncronizes a 50MHz laser and an 80MHz laser.

Syncronizes a 50MHz laser and an 80MHz laser.

Embeddable link to order this shared Project

ControllerBlocks 4 x 4 cm proto

author: Xonik-Devices

2 layer board of 1.58 x 1.58 inches (40.0 x 40.0 mm)
Uploaded: April 6th 2014
Shared: April 6th 2014
Total Price: $12.40

Single item prototype board

Single item prototype board

Embeddable link to order this shared Project

LED Breadboard Stick

author: ccombs

2 layer board of 0.28 x 0.50 inches (7.2 x 12.7 mm)
Uploaded: April 6th 2014
Shared: April 6th 2014
Total Price: $0.70

Add a 330uf resistor, an LED of your choosing (3mm-10mm), and a 2-pin header for an easy-to-move breadboard LED stick! Helpful for diagnosing low-speed logic, or making pretty patterns. Note: Solder the short pin of the LED towards the flat side of the outline on the board. (For other voltages or…

Show full description

Add a 330uf resistor, an LED of your choosing (3mm-10mm), and a 2-pin header for an easy-to-move breadboard LED stick! Helpful for diagnosing low-speed logic, or making pretty patterns. Note: Solder the short pin of the LED towards the flat side of the outline on the board. (For other voltages or…

Show full description

Embeddable link to order this shared Project

DKBLE11x OTA AddOn Module

author: drmkroll

2 layer board of 1.05 x 0.90 inches (26.6 x 22.9 mm)
Uploaded: January 4th 2014
Shared: April 6th 2014
Total Price: $4.70

This is the DKBLE112/113 OTA AddOn Module described in blogpost: <http://www.mkroll.mobi/?p=1501>

The bill of materials consists of a few parts only:

  • 2 x 10 kOhm resistor (0603) package
  • 1 x 1uF capacitor (0603) package
  • 1 x W25X20CL SPI flash
  • 2 x 8pin Arduino Headers.

The E…

Show full description

This is the DKBLE112/113 OTA AddOn Module described in blogpost: <http://www.mkroll.mobi/?p=1501>

The bill of materials consists of a few parts only:

  • 2 x 10 kOhm resistor (0603) package
  • 1 x 1uF capacitor (0603) package
  • 1 x W25X20CL SPI flash
  • 2 x 8pin Arduino Headers.

The E…

Show full description

Embeddable link to order this shared Project

PICcell

author: bloguetronica

2 layer board of 0.70 x 1.00 inches (17.8 x 25.4 mm)
Uploaded: March 17th 2014
Shared: April 6th 2014
Total Price: $3.50

PIC12F683 development board

PIC12F683 development board

Embeddable link to order this shared Project

DC Regulated Supply rev 2.1

author: KAD

2 layer board of 1.60 x 1.00 inches (40.6 x 25.4 mm)
Uploaded: January 10th 2013
Shared: April 6th 2014
Total Price: $8.00

DC Regulated Supply rev 2.1

DC Regulated Supply rev 2.1

Embeddable link to order this shared Project

OpenSourceLights

author: KAD

2 layer board of 2.32 x 1.60 inches (58.9 x 40.6 mm)
Uploaded: April 6th 2014
Shared: April 6th 2014
Total Price: $18.50

PCB for LukeZ's OpenSourceLights

PCB for LukeZ's OpenSourceLights

Embeddable link to order this shared Project

CC3D

author: KAD

2 layer board of 1.43 x 1.43 inches (36.3 x 36.3 mm)
Uploaded: March 1st 2013
Shared: April 6th 2014
Total Price: $10.15

OpenPilot CC3D

OpenPilot CC3D

Embeddable link to order this shared Project

ATtiny85-ISP

author: KO4XL

2 layer board of 1.04 x 0.60 inches (26.3 x 15.2 mm)
Uploaded: April 6th 2014
Shared: April 6th 2014
Total Price: $3.10

Minimum ATtiny85 module with one blinking light.

Minimum ATtiny85 module with one blinking light.

Embeddable link to order this shared Project

FPV Backpack

author: cookie4524

2 layer board of 1.24 x 1.30 inches (31.4 x 33.0 mm)
Uploaded: April 5th 2014
Shared: April 5th 2014
Total Price: $8.00

FPV Baclpack

FPV Baclpack

Embeddable link to order this shared Project

Magic Trackpad Plugger copy

author: Wxll

2 layer board of 3.94 x 0.55 inches (100.0 x 14.0 mm)
Uploaded: March 23rd 2014
Shared: April 5th 2014
Total Price: $10.85

This board is exactly the right size to replace the two AA batteries in an Apple Magic Trackpad. Connect the two power lines from a USB cable to the input jack. Connect a wire from the + terminal on the other end so that it juts out and touches the terminal inside the trackpad. Connect a stiff wi…

Show full description

This board is exactly the right size to replace the two AA batteries in an Apple Magic Trackpad. Connect the two power lines from a USB cable to the input jack. Connect a wire from the + terminal on the other end so that it juts out and touches the terminal inside the trackpad. Connect a stiff wi…

Show full description

Embeddable link to order this shared Project

ATtiny84-ISP

author: KO4XL

2 layer board of 1.39 x 0.60 inches (35.3 x 15.2 mm)
Uploaded: April 5th 2014
Shared: April 5th 2014
Total Price: $4.15

Minimum ATtiny84 module with one blinking light.

Minimum ATtiny84 module with one blinking light.

Embeddable link to order this shared Project

HenryLCD II

author: KO4XL

2 layer board of 1.74 x 1.10 inches (44.2 x 27.9 mm)
Uploaded: April 4th 2014
Shared: April 4th 2014
Total Price: $9.55

Henry method 2-wire LCD interface. See Thomas Henry’s article in the February 2014 issue of Nuts and Volts. Rev II adds backlight control and still only needs 2 wires. (The Data line doubles as backlight control when no bits are being transferred.)

Henry method 2-wire LCD interface. See Thomas Henry’s article in the February 2014 issue of Nuts and Volts. Rev II adds backlight control and still only needs 2 wires. (The Data line doubles as backlight control when no bits are being transferred.)

Embeddable link to order this shared Project

mchck r5-rc3-55-ge7e081e 2014-04-03

author: brandonedens

2 layer board of 1.44 x 0.74 inches (36.7 x 18.9 mm)
Uploaded: April 4th 2014
Shared: April 4th 2014
Total Price: $5.35

http://mchck.org

http://mchck.org

Embeddable link to order this shared Project

Magic Trackpad Plugger

author: nsayer

2 layer board of 3.94 x 0.55 inches (100.0 x 14.0 mm)
Uploaded: April 4th 2014
Shared: April 4th 2014
Total Price: $10.85

No more AA batteries!

Replace the AA batteries in your Apple Magic Trackpad with this board. Solder a short, stiff wire to the + terminal at the front end to contact the positive terminal inside the trackpad. Connect another longer stiff wire to the - terminal at the back end and wedge the wir…

Show full description

No more AA batteries!

Replace the AA batteries in your Apple Magic Trackpad with this board. Solder a short, stiff wire to the + terminal at the front end to contact the positive terminal inside the trackpad. Connect another longer stiff wire to the - terminal at the back end and wedge the wir…

Show full description

Embeddable link to order this shared Project

MELD v1

author: tterev3

2 layer board of 0.73 x 0.73 inches (18.5 x 18.5 mm)
Uploaded: March 3rd 2014
Shared: April 3rd 2014
Total Price: $2.65

multicolor flashlight driver. full writeup here: http://tterev3.blogspot.com/2014/04/meld-v1-boards-and-olight-s10.html updated version here: http://oshpark.com/shared_projects/e1nOdOdw

multicolor flashlight driver. full writeup here: http://tterev3.blogspot.com/2014/04/meld-v1-boards-and-olight-s10.html updated version here: http://oshpark.com/shared_projects/e1nOdOdw

Embeddable link to order this shared Project

Pongclock 2.1

author: half-ogre

2 layer board of 2.56 x 1.51 inches (64.9 x 38.2 mm)
Uploaded: March 27th 2013
Shared: April 3rd 2014
Total Price: $19.20

A little LCD clock.

http://github.com/rparrett/pongclock http://robparrett.com/pongclock

A little LCD clock.

http://github.com/rparrett/pongclock http://robparrett.com/pongclock

Embeddable link to order this shared Project

Connected TIVA Launchpad

author: Stuff

4 layer board of 4.90 x 2.20 inches (124.5 x 55.9 mm)
Uploaded: April 3rd 2014
Shared: April 3rd 2014
Total Price: $107.80

TI EK-TM4C1294XL Connected Launchpad

http://processors.wiki.ti.com/index.php/File:EK-TM4C1294XL_REV_D_Design_Package.zip

TI EK-TM4C1294XL Connected Launchpad

http://processors.wiki.ti.com/index.php/File:EK-TM4C1294XL_REV_D_Design_Package.zip

Embeddable link to order this shared Project

pp2servo

author: PaulStoffregen

2 layer board of 1.70 x 1.50 inches (43.2 x 38.2 mm)
Uploaded: April 2nd 2014
Shared: April 2nd 2014
Total Price: $12.75

pp2servo

pp2servo

Embeddable link to order this shared Project