Shared Projects

Shared Projects

4-Fader MIDI Controller (Ext. Faders) v1.2

author: theturtle32

2 layer board of 1.50 x 2.40 inches (38.0 x 61.0 mm)
Uploaded: February 3rd 2014
Shared: March 31st 2014
Total Price: $17.95

For Justin Burnett

For Justin Burnett

Embeddable link to order this shared Project

Atmel (Arduino) virgin chip flasher

author: zorpat

2 layer board of 1.44 x 0.50 inches (36.5 x 12.7 mm)
Uploaded: March 31st 2014
Shared: March 31st 2014
Total Price: $3.55

With this PCB you can flash TQFP and 8DIP virgin Atmel chips

With this PCB you can flash TQFP and 8DIP virgin Atmel chips

Embeddable link to order this shared Project

RGB Booster

author: Akira76

2 layer board of 1.24 x 0.53 inches (31.4 x 13.4 mm)
Uploaded: March 31st 2014
Shared: March 31st 2014
Total Price: $3.25

RGB Booster v1.0

RGB Booster v1.0

Embeddable link to order this shared Project

FixelPower

author: Fixels

2 layer board of 3.79 x 0.64 inches (96.3 x 16.2 mm)
Uploaded: March 31st 2014
Shared: March 31st 2014
Total Price: $12.05

Power bus for 8 FRBs

Power bus for 8 FRBs

Embeddable link to order this shared Project

scaru 7 XM-L 20mm board

author: Warhawk

2 layer board of 0.79 x 0.79 inches (20.1 x 20.1 mm)
Uploaded: March 31st 2014
Shared: March 31st 2014
Total Price: $3.10

7 XM-L emitters on 20mm board

7 XM-L emitters on 20mm board

Embeddable link to order this shared Project

Traffic Light Shield

author: jmclean

2 layer board of 2.70 x 2.10 inches (68.6 x 53.3 mm)
Uploaded: March 31st 2014
Shared: March 31st 2014
Total Price: $28.30

Arduino Traffic Light Shield with bright LEDs for continuous integration systems or anywhere red/orange/green lights are needed.

Arduino Traffic Light Shield with bright LEDs for continuous integration systems or anywhere red/orange/green lights are needed.

Embeddable link to order this shared Project

RocketLog

author: matthewkennedy

2 layer board of 0.64 x 1.22 inches (16.2 x 31.0 mm)
Uploaded: March 30th 2014
Shared: March 30th 2014
Total Price: $3.85

RocketLog

RocketLog

Embeddable link to order this shared Project

Radio Breakout

author: uChip

2 layer board of 0.83 x 1.15 inches (21.1 x 29.2 mm)
Uploaded: December 3rd 2013
Shared: March 30th 2014
Total Price: $4.75

RFM12B to 0.1" pins

RFM12B to 0.1" pins

Embeddable link to order this shared Project

SGN/SMD Base Board

author: Akira76

2 layer board of 3.30 x 1.55 inches (83.8 x 39.4 mm)
Uploaded: March 30th 2014
Shared: March 30th 2014
Total Price: $25.55

SGN/SMD Base Board

SGN/SMD Base Board

Embeddable link to order this shared Project

CREE XB 16mm star

author: Helios-

2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded: March 30th 2014
Shared: March 30th 2014
Total Price: $1.95

CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.

Each via should be filled with solder or, even better, a short piece of solid copper wire + solder.

Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high power l…

Show full description

CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.

Each via should be filled with solder or, even better, a short piece of solid copper wire + solder.

Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high power l…

Show full description

Embeddable link to order this shared Project

CREE XB 16mm star

author: Helios-

2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded: March 30th 2014
Shared: March 30th 2014
Total Price: $1.95

CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.

Each via should be filled with solder or even better, a short piece of solid copper wire + solder.

Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high …

Show full description

CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.

Each via should be filled with solder or even better, a short piece of solid copper wire + solder.

Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high …

Show full description

Embeddable link to order this shared Project

TouchSense

author: Doxin

2 layer board of 1.02 x 1.52 inches (25.9 x 38.6 mm)
Uploaded: January 19th 2014
Shared: March 29th 2014
Total Price: $7.70

simple board for use with the arduino capsense library

simple board for use with the arduino capsense library

Embeddable link to order this shared Project

electronic load

author: jrsikken

2 layer board of 2.68 x 1.74 inches (68.1 x 44.1 mm)
Uploaded: March 29th 2014
Shared: March 29th 2014
Total Price: $23.25

Arduino CC/CV

Arduino CC/CV

Embeddable link to order this shared Project

Solar battery monitor

author: kallisti5

2 layer board of 2.09 x 2.25 inches (53.0 x 57.2 mm)
Uploaded: March 29th 2014
Shared: March 29th 2014
Total Price: $23.45

12v solar battery charge monitor w/fuse

12v solar battery charge monitor w/fuse

Embeddable link to order this shared Project

RGB Tiny Class

author: ATTiny

2 layer board of 1.79 x 1.00 inches (45.4 x 25.4 mm)
Uploaded: March 29th 2014
Shared: March 29th 2014
Total Price: $8.90

Control a RGB LED w/ATTiny45

Control a RGB LED w/ATTiny45

Embeddable link to order this shared Project

FixelCassette1x1v3

author: Fixels

2 layer board of 2.37 x 0.32 inches (60.3 x 8.1 mm)
Uploaded: March 29th 2014
Shared: March 29th 2014
Total Price: $3.75

Fixel Cassette 1x1 v3

Fixel Cassette 1x1 v3

Embeddable link to order this shared Project

Bluetooth Serial Adapter for OpenTrackers/TinyTrak

author: KC8UFV

2 layer board of 0.69 x 1.35 inches (17.4 x 34.3 mm)
Uploaded: March 29th 2014
Shared: March 29th 2014
Total Price: $4.60

Uses generic HC04 or HC06 bluetooth adapter, MAX16910 & MAX3233. X1 is to bring out the 2nd serial port if your device supports it. A Female DB9 connector fits on one end of the board and the bluetooth adapter board hangs off the other end. This board was based off the reference schematic for the…

Show full description

Uses generic HC04 or HC06 bluetooth adapter, MAX16910 & MAX3233. X1 is to bring out the 2nd serial port if your device supports it. A Female DB9 connector fits on one end of the board and the bluetooth adapter board hangs off the other end. This board was based off the reference schematic for the…

Show full description

Embeddable link to order this shared Project

Wireless Board V1.3

author: Ruben

2 layer board of 1.47 x 2.45 inches (37.3 x 62.3 mm)
Uploaded: March 28th 2014
Shared: March 28th 2014
Total Price: $18.00

Breakout board for arduino pro mini 3.3v, with an nRF2401+ connection. Also includes 4-DIP switches and a pot. The I2C and SPI lines are also broken out.

Breakout board for arduino pro mini 3.3v, with an nRF2401+ connection. Also includes 4-DIP switches and a pot. The I2C and SPI lines are also broken out.

Embeddable link to order this shared Project

I2C PWM Controller Core

author: neiderhauser

2 layer board of 2.54 x 3.00 inches (64.5 x 76.2 mm)
Uploaded: July 26th 2013
Shared: March 28th 2014
Total Price: $38.05

ATMega 328p PWM Driver over TTL or I2C

ATMega 328p PWM Driver over TTL or I2C

Embeddable link to order this shared Project

Wireless Board V1.2.2

author: Ruben

2 layer board of 1.36 x 2.44 inches (34.5 x 61.8 mm)
Uploaded: March 28th 2014
Shared: March 28th 2014
Total Price: $16.55

Breakout board for arduino pro mini 3.3v, with an nRF2401+ connection. Also includes 4-DIP switches and a pot. Replaces REV 1.2

Breakout board for arduino pro mini 3.3v, with an nRF2401+ connection. Also includes 4-DIP switches and a pot. Replaces REV 1.2

Embeddable link to order this shared Project