Hope Spacing And Drill Guide
author: CJackel
2 layer board of 2.05 x 1.57 inches (52.1 x 40.0 mm)
Uploaded:
January 30th 2014
Shared:
February 19th 2014
Total Price:
$16.10
Hope Spacing And Drill Guide 0.4mm To 2.0mm. 1mm, 2mm, 2.5mm and 2.54mm 0.1" Spacing
Hope Spacing And Drill Guide 0.4mm To 2.0mm. 1mm, 2mm, 2.5mm and 2.54mm 0.1" Spacing
Pummer
author: qwertyzzz18
2 layer board of 1.60 x 1.75 inches (40.7 x 44.6 mm)
Uploaded:
February 18th 2014
Shared:
February 18th 2014
Total Price:
$14.05
Charges during the day, blinks at night.
Charges during the day, blinks at night.
Preamp_v2
author: sensicomm
2 layer board of 1.54 x 0.58 inches (39.1 x 14.6 mm)
Uploaded:
February 18th 2014
Shared:
February 18th 2014
Total Price:
$4.40
30MHz preamp, hi-z input, output can drive 50-ohm load. <http://mhz100q.sourceforge.net/widgetries.shtml>
30MHz preamp, hi-z input, output can drive 50-ohm load. <http://mhz100q.sourceforge.net/widgetries.shtml>
PowerGen
author: sensicomm
2 layer board of 0.80 x 1.54 inches (20.2 x 39.0 mm)
Uploaded:
February 18th 2014
Shared:
February 18th 2014
Total Price:
$6.10
Switching regulator, based on MC34063. Can be wired for up, down, or invert operation. <http://mhz100q.sourceforge.net/widgetries.shtml>
Switching regulator, based on MC34063. Can be wired for up, down, or invert operation. <http://mhz100q.sourceforge.net/widgetries.shtml>
Serial Tester Rev A0
author: James95662
2 layer board of 2.31 x 2.76 inches (58.8 x 70.2 mm)
Uploaded:
December 6th 2013
Shared:
February 18th 2014
Total Price:
$31.95
AM Transmitter
author: iMagine-it-Tech
2 layer board of 1.54 x 1.50 inches (39.1 x 38.1 mm)
Uploaded:
February 17th 2014
Shared:
February 18th 2014
Total Price:
$11.50
AM Transmitter
AM Transmitter
TrackerDual
author: graham22
2 layer board of 3.94 x 2.18 inches (100.0 x 55.2 mm)
Uploaded:
September 19th 2013
Shared:
February 18th 2014
Total Price:
$42.80
Dual Axis Solar Tracker. https://solartracker.codeplex.com/
Dual Axis Solar Tracker. https://solartracker.codeplex.com/
Atari 2600 Mod Chip
author: Freefall
2 layer board of 1.95 x 1.95 inches (49.5 x 49.6 mm)
Uploaded:
January 10th 2014
Shared:
February 18th 2014
Total Price:
$19.00
Convert Atari RF to SVideo/Composite. For instructions, see here. The schematics came from there, I just redesigned the board to use SMD components.
Convert Atari RF to SVideo/Composite. For instructions, see here. The schematics came from there, I just redesigned the board to use SMD components.
bbps
author: major
2 layer board of 2.05 x 0.99 inches (52.2 x 25.2 mm)
Uploaded:
February 17th 2014
Shared:
February 17th 2014
Total Price:
$10.15
Breadboard Power Supply with USB data pass-through
<http://chris.majoros.us/mmdh/?page_id=392>
Breadboard Power Supply with USB data pass-through
<http://chris.majoros.us/mmdh/?page_id=392>
raspberry-pi-rs-micro-sd-adapter-V3
author: Warhawk
2 layer board of 0.63 x 0.95 inches (16.1 x 24.1 mm)
Uploaded:
February 17th 2014
Shared:
February 17th 2014
Total Price:
$3.00
https://code.google.com/p/raspberry-pi-rs-micro-sd-adapter/
https://code.google.com/p/raspberry-pi-rs-micro-sd-adapter/
Flash-O-Tron
author: TomWhitwell
2 layer board of 2.90 x 2.00 inches (73.7 x 50.8 mm)
Uploaded:
January 26th 2014
Shared:
February 16th 2014
Total Price:
$29.00
LED flashing thingy
LED flashing thingy
Arduino Linbus Beeper Rev B
author: zapta
2 layer board of 1.15 x 1.57 inches (29.2 x 39.8 mm)
Uploaded:
February 16th 2014
Shared:
February 16th 2014
Total Price:
$9.00
Arduino based linbus analyzer and detector. Source files are here https://github.com/zapta/linbus/tree/master/beeper
Github commit f83bccacd0493d325779ceb9d2ac971acd8ba990
Arduino based linbus analyzer and detector. Source files are here https://github.com/zapta/linbus/tree/master/beeper
Github commit f83bccacd0493d325779ceb9d2ac971acd8ba990
ZIF Socket Programmer For ATTiny84/85
author: jimgrina
2 layer board of 2.74 x 1.25 inches (69.5 x 31.8 mm)
Uploaded:
February 16th 2014
Shared:
February 16th 2014
Total Price:
$17.10
You can program an ATTiny84 or 85 by inserting the chip in the appropriate portion of the socket. To make it easy, place a jumper wire across the pin location between chip locations
You can program an ATTiny84 or 85 by inserting the chip in the appropriate portion of the socket. To make it easy, place a jumper wire across the pin location between chip locations