CycloneGRBLControl
author: secures
2 layer board of 3.22 x 2.71 inches (81.8 x 68.8 mm)
Uploaded:
December 22nd 2013
Shared:
December 22nd 2013
Total Price:
$43.55
CNC ControlBoard for Cyclone-PCB-Factory (GRBL compatilble)
CNC ControlBoard for Cyclone-PCB-Factory (GRBL compatilble)
Sparkfun 6" 7 Segment Breakout (Conventional)
author: Damage
2 layer board of 1.95 x 1.73 inches (49.5 x 43.9 mm)
Uploaded:
December 21st 2013
Shared:
December 21st 2013
Total Price:
$16.85
A Breakout board so that the 6" Sparkfun 7 Segment displays can be "Daisy Chained" Uses Shift Registers in an "Open Drain" configuration. This is the Conventional Version (Decimal Point at the bottom Right)
A Breakout board so that the 6" Sparkfun 7 Segment displays can be "Daisy Chained" Uses Shift Registers in an "Open Drain" configuration. This is the Conventional Version (Decimal Point at the bottom Right)
Sparkfun 6" 7 Segment Breakout (Inverted)
author: Damage
2 layer board of 1.95 x 1.73 inches (49.5 x 43.9 mm)
Uploaded:
December 21st 2013
Shared:
December 21st 2013
Total Price:
$16.85
A Breakout board so that the 6" Sparkfun 7 Segment displays can be "Daisy Chained" Uses Shift Registers in an "Open Drain" configuration. This is the Inverted Version (Decimal Point at the top left)
A Breakout board so that the 6" Sparkfun 7 Segment displays can be "Daisy Chained" Uses Shift Registers in an "Open Drain" configuration. This is the Inverted Version (Decimal Point at the top left)
LED & Button Breakout v1.1
author: heckler95
2 layer board of 2.15 x 0.90 inches (54.7 x 22.9 mm)
Uploaded:
December 19th 2013
Shared:
December 19th 2013
Total Price:
$9.65
Breakout board with 6 through-hole momentary pushbuttons and 6 1206 SMD LEDs. Also includes 0805 SMD pull-up resistors for the buttons and current-limiting resistors for the LEDs. UNTESTED DESIGN
Breakout board with 6 through-hole momentary pushbuttons and 6 1206 SMD LEDs. Also includes 0805 SMD pull-up resistors for the buttons and current-limiting resistors for the LEDs. UNTESTED DESIGN
DS1307 Breakout v2.0
author: heckler95
2 layer board of 1.20 x 1.05 inches (30.5 x 26.7 mm)
Uploaded:
September 11th 2013
Shared:
December 19th 2013
Total Price:
$6.30
DS1307 Real-time Clock IC breakout board for easily incorporating a DS1307 into your breadboard projects. This is my first attempt at board design. I have built and tested all 3 copies from my order and they all work great.
DS1307 Real-time Clock IC breakout board for easily incorporating a DS1307 into your breadboard projects. This is my first attempt at board design. I have built and tested all 3 copies from my order and they all work great.
Lorenz Attractor
author: Quim
2 layer board of 2.00 x 1.04 inches (50.8 x 26.3 mm)
Uploaded:
November 25th 2013
Shared:
December 19th 2013
Total Price:
$10.35
This is an implementation of the circuit suggested in http://frank.harvard.edu/~paulh/misc/lorenz.htm that models the Lorenz equations.
This is an implementation of the circuit suggested in http://frank.harvard.edu/~paulh/misc/lorenz.htm that models the Lorenz equations.
OpAmp Buffer
author: Animo
2 layer board of 1.16 x 0.64 inches (29.5 x 16.1 mm)
Uploaded:
December 18th 2013
Shared:
December 18th 2013
Total Price:
$3.65
Medium Speed Cable Driver Uses NPN/PNP pairs to create emitter follower driver capable of ±10Vp-p into 50 ohm cable from ±15V supply. PDF Schematic with design details at [email protected]
Medium Speed Cable Driver Uses NPN/PNP pairs to create emitter follower driver capable of ±10Vp-p into 50 ohm cable from ±15V supply. PDF Schematic with design details at [email protected]
Digital logic Booster
author: Animo
2 layer board of 1.39 x 0.86 inches (35.2 x 21.9 mm)
Uploaded:
December 18th 2013
Shared:
December 18th 2013
Total Price:
$5.95
Logic Cable Driver This cable driver level shifts 0-5V logic to ±V supply of choice and will drive 50 ohm coax. Maintains high impedance (shut-off) with tri-state drive. PDF Schematic with design details at [email protected]
Logic Cable Driver This cable driver level shifts 0-5V logic to ±V supply of choice and will drive 50 ohm coax. Maintains high impedance (shut-off) with tri-state drive. PDF Schematic with design details at [email protected]
AMP Pixel Unit
author: amp
2 layer board of 2.76 x 2.45 inches (70.0 x 62.3 mm)
Uploaded:
December 4th 2013
Shared:
December 17th 2013
Total Price:
$33.80
This board drives an LED pixel strand and several sensors and can include an RS485 chip for communication between multiple boards.
This board drives an LED pixel strand and several sensors and can include an RS485 chip for communication between multiple boards.