Shared Projects

Shared Projects

RC2014 Board 6 - Serial IO

author: semachthemonkey
Top
Bottom

2 layer board of 3.69 x 0.87 inches (93.6 x 22.0 mm)
Uploaded: July 05, 2014
Shared: July 31, 2014
Total Price: $15.95

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 74HCT04, MC68B50, MAX232, 1uf caps, 2k2 resistors for FTDI

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 74HCT04, MC68B50, MAX232, 1uf caps, 2k2 resistors for FTDI

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RC2014 Board 5 - Clock & Reset

author: semachthemonkey
Top
Bottom

2 layer board of 0.82 x 1.04 inches (20.7 x 26.4 mm)
Uploaded: July 05, 2014
Shared: July 31, 2014
Total Price: $4.20

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 74HCT04, 7.3728Mhz xtal, 22pf caps, R1=2.2K, R2=1M, R3=1k

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 74HCT04, 7.3728Mhz xtal, 22pf caps, R1=2.2K, R2=1M, R3=1k

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RC2014 Board 3 - 27C512 ROM

author: semachthemonkey
Top
Bottom

2 layer board of 3.44 x 0.89 inches (87.4 x 22.6 mm)
Uploaded: July 05, 2014
Shared: July 31, 2014
Total Price: $15.30

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 27C512 split in to 8 8k pages selectable by jumpers. 74LS32 for address decoding

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 27C512 split in to 8 8k pages selectable by jumpers. 74LS32 for address decoding

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RC2014 Board 2 - 27C64 ROM

author: semachthemonkey
Top
Bottom

2 layer board of 3.44 x 0.89 inches (87.4 x 22.6 mm)
Uploaded: July 05, 2014
Shared: July 31, 2014
Total Price: $15.30

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 27C64 & 74LS32

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working. Uses 27C64 & 74LS32

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RC2014 Board 1- Z80 CPU

author: semachthemonkey
Top
Bottom

2 layer board of 3.44 x 0.87 inches (87.4 x 22.0 mm)
Uploaded: July 05, 2014
Shared: July 31, 2014
Total Price: $14.85

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working

Simple multiboard Z80 computer I designed for Retro Challenge 2014. For more info see http://www.sowen.com/category/retro-challenge/ Tested and working

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RGB Led Ring V3

author: SomNath
Top
Bottom

2 layer board of 1.71 x 1.71 inches (43.5 x 43.5 mm)
Uploaded: July 29, 2014
Shared: July 31, 2014
Total Price: $14.65

This is RGB LED ring from MODWORM ( http://blog.spitzenpfeil.org/wordpress/2013/10/19/ws2812b-atmega168-breakout-a-k-a-rgb-led-ring-v3/ )

This is RGB LED ring from MODWORM ( http://blog.spitzenpfeil.org/wordpress/2013/10/19/ws2812b-atmega168-breakout-a-k-a-rgb-led-ring-v3/ )

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RavenHID v1.2

author: emperorcow
Top
Bottom

2 layer board of 2.36 x 1.58 inches (60.0 x 40.0 mm)
Uploaded: March 31, 2014
Shared: July 31, 2014
Total Price: $18.60

Grab all the cards, hack all the things. https://github.com/emperorcow/ravenhid

Grab all the cards, hack all the things. https://github.com/emperorcow/ravenhid

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

diffamp2

author: martinlk
Top
Bottom

2 layer board of 2.83 x 1.85 inches (71.9 x 46.9 mm)
Uploaded: July 31, 2014
Shared: July 31, 2014
Total Price: $26.10

diffamp2 - 31 July

diffamp2 - 31 July

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

9A Zener Modified MT-G2 Driver

author: Mattaus
Top
Bottom

2 layer board of 1.27 x 1.27 inches (32.3 x 32.3 mm)
Uploaded: July 31, 2014
Shared: July 31, 2014
Total Price: $8.05

32mm, 24xAMC Linear Regulator, Zener modified.

Single 9A LED- connection.

32mm, 24xAMC Linear Regulator, Zener modified.

Single 9A LED- connection.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

nRF24L01+Teensy3.1Add-On.v02x

author: PeskyProducts
Top
Bottom

2 layer board of 0.71 x 0.77 inches (18.0 x 19.7 mm)
Uploaded: July 31, 2014
Shared: July 31, 2014
Total Price: $2.70

nRF24L01+ 2.4 GHz rf radio add-on shield for Teensy 3.1;third iteration to improve ground plane and add additional decoupling capacitor

nRF24L01+ 2.4 GHz rf radio add-on shield for Teensy 3.1;third iteration to improve ground plane and add additional decoupling capacitor

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Atmega328p Slide Over V3

author: jbrennon
Top
Bottom

2 layer board of 0.60 x 1.85 inches (15.3 x 47.0 mm)
Uploaded: July 31, 2014
Shared: July 31, 2014
Total Price: $5.55

Simple programming slide over for ATmega328p. Just slide it over the board and plug in a programmer.

Simple programming slide over for ATmega328p. Just slide it over the board and plug in a programmer.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DCMotorControlTeensy3.1Add-On.v01

Top
Bottom

2 layer board of 0.71 x 0.61 inches (17.9 x 15.4 mm)
Uploaded: July 31, 2014
Shared: July 31, 2014
Total Price: $2.10

DC brushed motor control with PWM add-on shield for Teensy 3.1

DC brushed motor control with PWM add-on shield for Teensy 3.1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Printrboard Rev. F

author: pixnbits
Top
Bottom

4 layer board of 3.94 x 2.58 inches (100.1 x 65.6 mm)
Uploaded: July 31, 2014
Shared: July 31, 2014
Total Price: $101.70

from https://github.com/Printrbot/printrboard/blob/master/Printrboard.brd

from https://github.com/Printrbot/printrboard/blob/master/Printrboard.brd

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HIP9011 DD rev 0.1 copy

author: rusefi
Top
Bottom

2 layer board of 1.58 x 1.35 inches (40.2 x 34.2 mm)
Uploaded: June 16, 2014
Shared: July 30, 2014
Total Price: $10.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Led Matrix 8*48

author: Fahmi-Aymane
Top
Bottom

2 layer board of 15.66 x 3.51 inches (397.7 x 89.1 mm)
Uploaded: July 30, 2014
Shared: July 30, 2014
Total Price: $274.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

8*48 matrix led driver

author: Fahmi-Aymane
Top
Bottom

2 layer board of 9.21 x 6.31 inches (233.9 x 160.2 mm)
Uploaded: July 30, 2014
Shared: July 30, 2014
Total Price: $290.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ws2811d1

author: tubular
Top
Bottom

2 layer board of 3.90 x 0.43 inches (99.1 x 10.8 mm)
Uploaded: January 23, 2014
Shared: July 30, 2014
Total Price: $8.30

ws2811 ad infinitum 0.1" pitch

ws2811 ad infinitum 0.1" pitch

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RJ45 Breakout board

author: wilcosound
Top
Bottom

2 layer board of 0.90 x 1.20 inches (22.9 x 30.5 mm)
Uploaded: July 25, 2014
Shared: July 29, 2014
Total Price: $5.40

BoB for FCI 54602-908LF RJ45 connector with jumpered pairs.

BoB for FCI 54602-908LF RJ45 connector with jumpered pairs.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

teeny tiny 4 bit r2r

author: selmo
Top
Bottom

2 layer board of 0.68 x 0.33 inches (17.2 x 8.4 mm)
Uploaded: July 29, 2014
Shared: July 29, 2014
Total Price: $1.10

Uses 2 0.1% 0612 resistor arrays, chainable, untested

Uses 2 0.1% 0612 resistor arrays, chainable, untested

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pike1

author: tubular
Top
Bottom

2 layer board of 2.57 x 2.34 inches (65.2 x 59.3 mm)
Uploaded: July 29, 2014
Shared: July 29, 2014
Total Price: $29.95

Pike1

Pike1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy