Shared Projects

Shared Projects

SRK FET Based Driver

author: Mattaus
Top
Bottom

2 layer board of 1.90 x 1.81 inches (48.3 x 46.1 mm)
Uploaded: March 13th 2014
Shared: March 13th 2014
Total Price: $17.20

46mm 20A FET LED Driver For SRK Lights.

L1: TBD FET: 70N02 D2: DIODE_MBRS540. Connects between D1 and C+ pad. Diode D1 SOD-323. C1 is 10 uF. Resistors are 19.1K and 4.7K, 1% Regulator chips are AMC7135 Processor is ATTINY13 or similar LED connects to the + and – holes. C- & C+: are for use…

Show full description

46mm 20A FET LED Driver For SRK Lights.

L1: TBD FET: 70N02 D2: DIODE_MBRS540. Connects between D1 and C+ pad. Diode D1 SOD-323. C1 is 10 uF. Resistors are 19.1K and 4.7K, 1% Regulator chips are AMC7135 Processor is ATTINY13 or similar LED connects to the + and – holes. C- & C+: are for use…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Lipochargeur4

author: totof
Top
Bottom

2 layer board of 1.39 x 0.48 inches (35.3 x 12.2 mm)
Uploaded: March 12th 2014
Shared: March 13th 2014
Total Price: $3.30

The first version is working but make an error with the implement mosfet and the connector names

New version( not tested) of my lipo charger. Change the mosfet implement error. Change the shunt implement on the bottom.

[email protected]

C1 4.7 uF CAP0805 0805 …

Show full description

The first version is working but make an error with the implement mosfet and the connector names

New version( not tested) of my lipo charger. Change the mosfet implement error. Change the shunt implement on the bottom.

[email protected]

C1 4.7 uF CAP0805 0805 …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Transceiver Module 1.3

author: PhracturedBlue
Top
Bottom

2 layer board of 0.92 x 1.86 inches (23.3 x 47.1 mm)
Uploaded: February 16th 2014
Shared: March 13th 2014
Total Price: $8.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

MrRetupmoc's Moffset Driver [ PS Replacement ]

author: MrRetupmoc42
Top
Bottom

2 layer board of 0.82 x 0.61 inches (20.7 x 15.4 mm)
Uploaded: March 12th 2014
Shared: March 13th 2014
Total Price: $2.45

Drop in Replacement of Pololu Stepstick to Control 2 x High Powered Moffset(s) [ 40V 195A ] on MrRetupmoc's RPi SMC ( Stepper Motor Coil Pinout Used as Moffset Output ) http://retupmoc.ca/mrretupmoc42/products/

Drop in Replacement of Pololu Stepstick to Control 2 x High Powered Moffset(s) [ 40V 195A ] on MrRetupmoc's RPi SMC ( Stepper Motor Coil Pinout Used as Moffset Output ) http://retupmoc.ca/mrretupmoc42/products/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

MrRetupmoc's RPi SC

author: MrRetupmoc42
Top
Bottom

2 layer board of 1.36 x 1.63 inches (34.5 x 41.3 mm)
Uploaded: March 12th 2014
Shared: March 13th 2014
Total Price: $11.00

RPi Controller Board for up to 16 Servo's ( 17th Port Used as Power Input ) [ Hint : WiringPi Pinout ] http://retupmoc.ca/mrretupmoc42/

RPi Controller Board for up to 16 Servo's ( 17th Port Used as Power Input ) [ Hint : WiringPi Pinout ] http://retupmoc.ca/mrretupmoc42/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

JToy Slider v1.0

author: jcayer
Top
Bottom

2 layer board of 2.71 x 2.10 inches (68.9 x 53.4 mm)
Uploaded: December 27th 2013
Shared: March 12th 2014
Total Price: $28.50

Arduino Shield to drive a slider for timelapse photography

Arduino Shield to drive a slider for timelapse photography

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Pinoccio Module v0.1

author: Allison-Clift-Jennings
Top
Bottom

2 layer board of 0.76 x 1.01 inches (19.3 x 25.6 mm)
Uploaded: April 5th 2013
Shared: March 12th 2014
Total Price: $3.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Frankenstein v 0.1

author: rusefi
Top
Bottom

2 layer board of 3.94 x 3.94 inches (100.1 x 100.0 mm)
Uploaded: March 12th 2014
Shared: March 12th 2014
Total Price: $77.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

12 ch injector driver v 0.1

author: rusefi
Top
Bottom

2 layer board of 1.86 x 2.33 inches (47.3 x 59.2 mm)
Uploaded: March 12th 2014
Shared: March 12th 2014
Total Price: $21.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Astro Clock v1.0

author: alexkarantzaa
Top
Bottom

2 layer board of 2.56 x 1.33 inches (64.9 x 33.8 mm)
Uploaded: March 12th 2014
Shared: March 12th 2014
Total Price: $16.95

USB powered ATMega with RTC and LEDs

USB powered ATMega with RTC and LEDs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

ping ctr final

author: jonwilhelmjr
Top
Bottom

2 layer board of 3.05 x 1.41 inches (77.5 x 35.9 mm)
Uploaded: March 12th 2014
Shared: March 12th 2014
Total Price: $21.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

MrRetupmoc's RPi SMC Rev 1.1

author: MrRetupmoc42
Top
Bottom

2 layer board of 3.34 x 2.20 inches (84.9 x 55.9 mm)
Uploaded: March 12th 2014
Shared: March 12th 2014
Total Price: $36.80

RPi Controller Board for 6 x Pololu Stepstick(s) [ A4983 or A4988 ], 3 x High Powered Moffset(s) [ 40V 195A ], A Mic Jack for the Peachy Printer [ Z Axis Input ] and Unused I2C Pins [ Limit Input ] http://retupmoc.ca/mrretupmoc42/products/

RPi Controller Board for 6 x Pololu Stepstick(s) [ A4983 or A4988 ], 3 x High Powered Moffset(s) [ 40V 195A ], A Mic Jack for the Peachy Printer [ Z Axis Input ] and Unused I2C Pins [ Limit Input ] http://retupmoc.ca/mrretupmoc42/products/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

USB A Plug

author: mrenouf
Top
Bottom

2 layer board of 0.48 x 0.51 inches (12.1 x 13.0 mm)
Uploaded: March 6th 2014
Shared: March 12th 2014
Total Price: $1.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

TQFN-56 Breakout Board

author: mrenouf
Top
Bottom

2 layer board of 2.90 x 1.20 inches (73.7 x 30.5 mm)
Uploaded: March 12th 2014
Shared: March 12th 2014
Total Price: $17.40

TQFN-56, 7mm x 7mm, 0.4mm pitch

TQFN-56, 7mm x 7mm, 0.4mm pitch

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Plant Waterer 1.1

author: Lippy
Top
Bottom

2 layer board of 1.96 x 1.40 inches (49.8 x 35.6 mm)
Uploaded: March 12th 2014
Shared: March 12th 2014
Total Price: $13.70

Measures soil moisture via soil capacitance and controls a valve made from RC servo. Uses solar panel to charge a Li-Ion cell. RGB LED displays the moisture level. Pushbuttons lets the user give feedback to the controller on how well its watering.

Measures soil moisture via soil capacitance and controls a valve made from RC servo. Uses solar panel to charge a Li-Ion cell. RGB LED displays the moisture level. Pushbuttons lets the user give feedback to the controller on how well its watering.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

AD8253 Programmable Gain Instrumentation Amplifier Breakout

author: siahman
Top
Bottom

2 layer board of 1.12 x 0.83 inches (28.4 x 21.2 mm)
Uploaded: March 12th 2014
Shared: March 12th 2014
Total Price: $4.60

Breaks out the 10 pin AD8253ARMZ-R7. A low noise, programmable op-amp.

Breaks out the 10 pin AD8253ARMZ-R7. A low noise, programmable op-amp.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Serial Pi terminal Block

author: Junkhacker
Top
Bottom

2 layer board of 1.33 x 0.91 inches (33.8 x 23.1 mm)
Uploaded: March 7th 2014
Shared: March 11th 2014
Total Price: $6.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Serial Pi terminal block and 2 input pins

author: Junkhacker
Top
Bottom

2 layer board of 1.72 x 1.21 inches (43.6 x 30.7 mm)
Uploaded: March 10th 2014
Shared: March 11th 2014
Total Price: $10.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Bridge Rectifiers

author: siahman
Top
Bottom

2 layer board of 1.74 x 0.60 inches (44.2 x 15.2 mm)
Uploaded: March 10th 2014
Shared: March 11th 2014
Total Price: $5.20

Bridge rectifier chip and custom diode rectifier.

Bridge rectifier chip and custom diode rectifier.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

CardosoTech.com 12v to 6v

author: GarfosFacas
Top
Bottom

2 layer board of 1.96 x 0.90 inches (49.9 x 23.0 mm)
Uploaded: March 11th 2014
Shared: March 11th 2014
Total Price: $8.85

With LM78XX

With LM78XX

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2023 Oshpark LLC