Wireless Board REV1.2
author: Ruben
2 layer board of 1.36 x 2.44 inches (34.5 x 61.8 mm)
Uploaded:
December 30th 2013
Shared:
March 27th 2014
Total Price:
$16.55
Breakout board for arduino pro mini 3.3v, with an nRF2401+ connection. Also includes 4-DIP switches and a pot. (unfortunately due to a design error the dip-switches are useless, an updated version will be updated later on). Replaced by REV 1.2.2
Breakout board for arduino pro mini 3.3v, with an nRF2401+ connection. Also includes 4-DIP switches and a pot. (unfortunately due to a design error the dip-switches are useless, an updated version will be updated later on). Replaced by REV 1.2.2
TO-220 breakout v2
author: pepaslabs
2 layer board of 1.75 x 1.50 inches (44.6 x 38.2 mm)
Uploaded:
March 26th 2014
Shared:
March 26th 2014
Total Price:
$13.15
TO-220 (TO-218, TO-247) breakout board with heatsink.
https://github.com/pepaslabs/TO-220_breakout
TO-220 (TO-218, TO-247) breakout board with heatsink.
https://github.com/pepaslabs/TO-220_breakout
HxC LCD Adapter
author: evilxyzzy
2 layer board of 1.62 x 0.95 inches (41.0 x 24.1 mm)
Uploaded:
August 30th 2013
Shared:
March 25th 2014
Total Price:
$7.65
Adapter board for small LCD to HxC Floppy Emulator board. This converts HDM16216L-S ( tiny LCD ) FFC cable to standard 16pin. Uses Mouser 649-HLW16R-2C7LF connector. The concept is to make things small enough to mount in a 3.5" drive bay because I am too cheap to buy the 3.5" version.
Adapter board for small LCD to HxC Floppy Emulator board. This converts HDM16216L-S ( tiny LCD ) FFC cable to standard 16pin. Uses Mouser 649-HLW16R-2C7LF connector. The concept is to make things small enough to mount in a 3.5" drive bay because I am too cheap to buy the 3.5" version.
SDSAdapter
author: evilxyzzy
2 layer board of 1.23 x 1.40 inches (31.1 x 35.6 mm)
Uploaded:
February 21st 2014
Shared:
March 25th 2014
Total Price:
$8.55
midi2sds(x) gate voltage level adapter. This makes a v1.3 board act like a v1.5 board so you can set the pulse voltage near 10volts instead of 2.5v. Plugs in place of DAC with no mods just one wire to run for +12v. If you actually use this, contact me for details.
midi2sds(x) gate voltage level adapter. This makes a v1.3 board act like a v1.5 board so you can set the pulse voltage near 10volts instead of 2.5v. Plugs in place of DAC with no mods just one wire to run for +12v. If you actually use this, contact me for details.
TS850-DCDC
author: evilxyzzy
2 layer board of 1.20 x 0.80 inches (30.5 x 20.3 mm)
Uploaded:
March 25th 2014
Shared:
March 25th 2014
Total Price:
$4.80
TS850 DCDC Retrofit Design by OZ1BXM. Quick layout by me ( K6AET )
TS850 DCDC Retrofit Design by OZ1BXM. Quick layout by me ( K6AET )
HoldUp2+RTC
author: BudBennett
2 layer board of 1.49 x 1.08 inches (37.8 x 27.5 mm)
Uploaded:
September 11th 2013
Shared:
March 25th 2014
Total Price:
$8.05
Provides power from super cap to Raspberry Pi during power loss, and real-time clock
Provides power from super cap to Raspberry Pi during power loss, and real-time clock
Solenoid Backpack v1.0
author: Allison-Clift-Jennings
2 layer board of 1.01 x 1.69 inches (25.6 x 42.9 mm)
Uploaded:
March 9th 2014
Shared:
March 24th 2014
Total Price:
$8.50
Solenoid Backpack v1.0
Solenoid Backpack v1.0
universal relay delay
author: LRY
2 layer board of 2.49 x 1.00 inches (63.2 x 25.4 mm)
Uploaded:
March 24th 2014
Shared:
March 24th 2014
Total Price:
$12.40
BC517 variable relay delay controller, fixed or variable delay, instant reset when de-energized.
BC517 variable relay delay controller, fixed or variable delay, instant reset when de-energized.