[OUTDATED] Firmware Developers Only - 17mm DD+7135
author: Red
2 layer board of 0.67 x 0.67 inches (17.0 x 17.0 mm)
Uploaded:
August 06, 2014
Shared:
August 06, 2014
Total Price:
$2.20
If you can't figure out the component placements on a completely unlabeled board, this is not for you. This board does not have a firmware available. This board is untested. This board does not have the [June/July 2014] anti-boost fix incorporated, MCU voltage may go too high. Any silkscreen …
Show full description
If you can't figure out the component placements on a completely unlabeled board, this is not for you. This board does not have a firmware available. This board is untested. This board does not have the [June/July 2014] anti-boost fix incorporated, MCU voltage may go too high. Any silkscreen …
Show full description
SNES Flash Mask ROM - 32 Mbit
author: Dongulus
2 layer board of 2.06 x 0.81 inches (52.2 x 20.5 mm)
Uploaded:
August 06, 2014
Shared:
August 06, 2014
Total Price:
$8.25
Board to breakout 32 Mbit Intel 28F320J5 flash chip to fit in a Super Nintendo cartridge mask ROM slot.
Board to breakout 32 Mbit Intel 28F320J5 flash chip to fit in a Super Nintendo cartridge mask ROM slot.
BinaryQuad
author: BinarySpike
2 layer board of 2.21 x 2.11 inches (56.1 x 53.6 mm)
Uploaded:
August 06, 2014
Shared:
August 06, 2014
Total Price:
$23.30
Arduino Uno breakout shield for RFM22B-S2, AltIMU-10 v3, and 5v-to-3.3v level shifter.
Arduino Uno breakout shield for RFM22B-S2, AltIMU-10 v3, and 5v-to-3.3v level shifter.
Big Muff 1/2W
author: mmolteratx
2 layer board of 2.33 x 2.24 inches (59.1 x 56.8 mm)
Uploaded:
August 06, 2014
Shared:
August 06, 2014
Total Price:
$26.00
Same as the other one, but with 1/2W resistors.
Schematic: https://dl.dropboxusercontent.com/u/8021347/MayonaiseIII.png
Same as the other one, but with 1/2W resistors.
Schematic: https://dl.dropboxusercontent.com/u/8021347/MayonaiseIII.png
Arduino with Ethernet
author: goboxgizmos
2 layer board of 3.50 x 2.00 inches (88.9 x 50.8 mm)
Uploaded:
August 05, 2014
Shared:
August 05, 2014
Total Price:
$34.95
This is a ‘328 compatible board with ENC28j60 Ethernet (etherCard library). The original is from “drj113” over at http://www.instructables.com/id/A-credit-card-sized-Ethernet-Arduino-compatable-co/.
His board was laid out in KiCAD which I don’t use so I converted it to Eagle and also swapped t…
Show full description
This is a ‘328 compatible board with ENC28j60 Ethernet (etherCard library). The original is from “drj113” over at http://www.instructables.com/id/A-credit-card-sized-Ethernet-Arduino-compatable-co/.
His board was laid out in KiCAD which I don’t use so I converted it to Eagle and also swapped t…
Show full description
3PDT Daughter Board
author: mmolteratx
2 layer board of 1.79 x 0.90 inches (45.4 x 22.9 mm)
Uploaded:
August 05, 2014
Shared:
August 05, 2014
Total Price:
$8.05
For true bypass with basic onboard power filtering.
Schematic: https://dl.dropboxusercontent.com/u/8021347/Switch.png
For true bypass with basic onboard power filtering.
Schematic: https://dl.dropboxusercontent.com/u/8021347/Switch.png
USBMiniSw
author: AtomSoft
2 layer board of 0.73 x 1.15 inches (18.5 x 29.1 mm)
Uploaded:
August 02, 2014
Shared:
August 05, 2014
Total Price:
$4.15
Untested Simple USB Switch (DUAL) R1 - 0805 - 10k u$1 - MAX4899AE U$3-U$4 - MINI B USB U$7 - USB Type A U$9 - JS102011SAQN U$10 - TLV70033DDCT
Untested Simple USB Switch (DUAL) R1 - 0805 - 10k u$1 - MAX4899AE U$3-U$4 - MINI B USB U$7 - USB Type A U$9 - JS102011SAQN U$10 - TLV70033DDCT
Garage Door Monitor
author: EmptyJay
2 layer board of 2.11 x 2.36 inches (53.5 x 59.9 mm)
Uploaded:
July 31, 2014
Shared:
August 05, 2014
Total Price:
$24.85
Garage Door Monitor Arduino shield. Connects to sensor boards and door opener.
Garage Door Monitor Arduino shield. Connects to sensor boards and door opener.