WS2812B Ring Board Section
author: vectorspace
2 layer board of 1.36 x 0.46 inches (34.5 x 11.8 mm)
Uploaded:
March 25, 2014
Shared:
September 04, 2014
Total Price:
$3.10
Solder four together to make a ring of twelve WS2812B RGB LEDs. (Tested-Good)
Solder four together to make a ring of twelve WS2812B RGB LEDs. (Tested-Good)
TouchDRO Interface
author: lensboards
2 layer board of 3.06 x 1.72 inches (77.7 x 43.7 mm)
Uploaded:
August 12, 2014
Shared:
September 04, 2014
Total Price:
$26.25
TouchDRO IF for quadrature scales. More info at <http://www.yuriystoys.com/p/android-dro.html> and <https://lensprojects.wordpress.com/2015/09/27/touchdro-machine-position-digital-readout/>
TouchDRO IF for quadrature scales. More info at <http://www.yuriystoys.com/p/android-dro.html> and <https://lensprojects.wordpress.com/2015/09/27/touchdro-machine-position-digital-readout/>
Mini TV-B-Gone, r3
author: the-hat
2 layer board of 1.11 x 1.56 inches (28.2 x 39.6 mm)
Uploaded:
August 19, 2014
Shared:
September 04, 2014
Total Price:
$8.65
Surface mount remix of TV-B-Gone, revision 3. BOM, firmware, etc. for revision 2 available at https://www.noxvault.org/oshw/mini-tvbgone-r2.tgz Updated source materials for revision 3 to be published shortly.
Surface mount remix of TV-B-Gone, revision 3. BOM, firmware, etc. for revision 2 available at https://www.noxvault.org/oshw/mini-tvbgone-r2.tgz Updated source materials for revision 3 to be published shortly.
24VAC to 5VDC Buck Regulator
author: schizobovine
2 layer board of 1.20 x 2.04 inches (30.5 x 51.8 mm)
Uploaded:
August 26, 2014
Shared:
September 04, 2014
Total Price:
$12.20
For running off power used in HVAC systems (24VAC sometimes called the "clock" signal).
For running off power used in HVAC systems (24VAC sometimes called the "clock" signal).
The VoCopter v3
author: danb
2 layer board of 1.67 x 1.95 inches (42.5 x 49.4 mm)
Uploaded:
August 08, 2014
Shared:
September 03, 2014
Total Price:
$16.25
A Teensy 3.1 based, WiFi controlled, QuadCopter flight controller.
A Teensy 3.1 based, WiFi controlled, QuadCopter flight controller.
USBlink
author: Kim_Kristoffersen
2 layer board of 1.00 x 0.67 inches (25.4 x 17.1 mm)
Uploaded:
September 27, 2013
Shared:
September 03, 2014
Total Price:
$3.35
A small usb Blinker with 8 led`s (all adressable) using the Attiny45/85 This one uses only through-hole components. (no data connection, just power)
not yet tested, but pretty sure it will work just fine.
A small usb Blinker with 8 led`s (all adressable) using the Attiny45/85 This one uses only through-hole components. (no data connection, just power)
not yet tested, but pretty sure it will work just fine.
Wheel lights thing - prototype
author: Kike.
2 layer board of 3.47 x 0.48 inches (88.2 x 12.3 mm)
Uploaded:
September 03, 2014
Shared:
September 03, 2014
Total Price:
$8.35
Yet another one of these thingies that display stuff on a wheel while it spins. uC is C8051F320. A magnetic switch is used to guess the angular rate. The large pads are for a surface mount battery holder. Cheers.
Yet another one of these thingies that display stuff on a wheel while it spins. uC is C8051F320. A magnetic switch is used to guess the angular rate. The large pads are for a surface mount battery holder. Cheers.
OD1+
author: mmolteratx
4 layer board of 2.08 x 1.35 inches (52.7 x 34.3 mm)
Uploaded:
September 02, 2014
Shared:
September 02, 2014
Total Price:
$28.00
Boss OD1 clone with tone control
For stock low end response, change C4 to 47nF
To remove tone control, make C5 18nF and omit C6/TONE
Schematic: https://dl.dropboxusercontent.com/u/8021347/OD1%2B.png
Boss OD1 clone with tone control
For stock low end response, change C4 to 47nF
To remove tone control, make C5 18nF and omit C6/TONE
Schematic: https://dl.dropboxusercontent.com/u/8021347/OD1%2B.png
FONA Data Logger Board
author: chipmc
2 layer board of 2.79 x 2.00 inches (70.8 x 50.8 mm)
Uploaded:
August 24, 2014
Shared:
September 02, 2014
Total Price:
$27.85
Tested - works!
eMail me (address on board) if you need BOM.
Board to simplify Fona sensor testing
Tested - works!
eMail me (address on board) if you need BOM.
Board to simplify Fona sensor testing
BLF_PLATE_26mm
author: Cereal_Killer
2 layer board of 1.04 x 1.04 inches (26.4 x 26.4 mm)
Uploaded:
September 01, 2014
Shared:
September 01, 2014
Total Price:
$5.35
26mm spring plate for TR-j18 / 9xT6 family of lights. $5.35 / set of 3
26mm spring plate for TR-j18 / 9xT6 family of lights. $5.35 / set of 3
ADP422TC v1.6
author: ChibiConsulting
2 layer board of 0.83 x 0.58 inches (21.1 x 14.8 mm)
Uploaded:
August 31, 2014
Shared:
August 31, 2014
Total Price:
$2.40
422 Polarity Checker
422 Polarity Checker