Audio limiter/leveler by W2AEW
author: LRY
2 layer board of 0.79 x 1.85 inches (20.0 x 47.0 mm)
Uploaded:
July 19, 2014
Shared:
July 22, 2014
Total Price:
$7.25
Audio limiter/leveler by W2AEW, checkout these videos: https://www.youtube.com/watch?v=1h0FZJYXQ_w and https://www.youtube.com/watch?v=pUii_pDQxg8&list=UUiqd3GLTluk2s_IBt7p_LjA
Audio limiter/leveler by W2AEW, checkout these videos: https://www.youtube.com/watch?v=1h0FZJYXQ_w and https://www.youtube.com/watch?v=pUii_pDQxg8&list=UUiqd3GLTluk2s_IBt7p_LjA
Motor
author: Kilohercas
2 layer board of 3.99 x 0.92 inches (101.4 x 23.4 mm)
Uploaded:
June 06, 2014
Shared:
July 22, 2014
Total Price:
$18.35
Motor PCB with Labview controller
Motor PCB with Labview controller
LM350T Voltage Regulator Board copy
author: mattpatt
2 layer board of 1.96 x 0.51 inches (49.7 x 12.8 mm)
Uploaded:
February 03, 2014
Shared:
July 22, 2014
Total Price:
$4.90
I use these boards to make inline voltage regulators for my trail cameras. A piece of ¾" heat shrink will cover it nicely then put a small plastic zip tie on each end. I usually then put a couple drops of super glue in the ends. The LM350 or LM350T VR's work the same. Both are thermal protect…
Show full description
I use these boards to make inline voltage regulators for my trail cameras. A piece of ¾" heat shrink will cover it nicely then put a small plastic zip tie on each end. I usually then put a couple drops of super glue in the ends. The LM350 or LM350T VR's work the same. Both are thermal protect…
Show full description
TempControllerSMD
author: BudBennett
2 layer board of 1.82 x 2.96 inches (46.2 x 75.3 mm)
Uploaded:
December 07, 2013
Shared:
July 22, 2014
Total Price:
$26.90
16 Channel analog/digital I/O board for Raspberry Pi
16 Channel analog/digital I/O board for Raspberry Pi
Big Purple Driver, Rev. 3
author: msds
2 layer board of 1.80 x 1.60 inches (45.7 x 40.6 mm)
Uploaded:
July 21, 2014
Shared:
July 21, 2014
Total Price:
$14.40
This board is a meta-breakout board for Pololu’s DRV8825 stepper driver module, designed to hold a custom-machined heatsink, capacitor, screw-terminal connectors, and an indicator LED for fault conditions.
- C1 is a Panasonic H13 100µF 63V electrolytic …
Show full description
This board is a meta-breakout board for Pololu’s DRV8825 stepper driver module, designed to hold a custom-machined heatsink, capacitor, screw-terminal connectors, and an indicator LED for fault conditions.
- C1 is a Panasonic H13 100µF 63V electrolytic …
Show full description
Camaro Line Lock
author: serisman
2 layer board of 1.25 x 1.25 inches (31.8 x 31.8 mm)
Uploaded:
July 21, 2014
Shared:
July 21, 2014
Total Price:
$7.85
$2.62 each ($7.85 for 3)
$2.62 each ($7.85 for 3)
test_klm
author: PatBeirne
4 layer board of 0.71 x 8.67 inches (18.1 x 220.1 mm)
Uploaded:
July 21, 2014
Shared:
July 21, 2014
Total Price:
$61.70
Module to manage 12 buttons & RGB lights, arranged in a single strip. This is basically an I/O expander; a Cortex-M0 processor handles all the peripherals. The UART handles both ISP and master-slave communication. Interface is 6 pins (2 power, 2 uart, 1 reset, 1 isp)
Module to manage 12 buttons & RGB lights, arranged in a single strip. This is basically an I/O expander; a Cortex-M0 processor handles all the peripherals. The UART handles both ISP and master-slave communication. Interface is 6 pins (2 power, 2 uart, 1 reset, 1 isp)
Open Sauce Charger
author: LightningStalker
2 layer board of 0.85 x 0.75 inches (21.5 x 19.0 mm)
Uploaded:
June 28, 2014
Shared:
July 20, 2014
Total Price:
$3.15
10440 Battery Charger using the MCP73831/2
10440 Battery Charger using the MCP73831/2
picoBuck 4ch (DF101 R1)
author: kayfox
2 layer board of 1.21 x 1.08 inches (30.7 x 27.5 mm)
Uploaded:
July 20, 2014
Shared:
July 20, 2014
Total Price:
$6.50
Based on the picoBuck 3 channel constant current LED driver by Ethan Zonca.
This version adds another channel and changes the PWM input from screw terminals to a pin header.
https://www.sparkfun.com/products/11850
Based on the picoBuck 3 channel constant current LED driver by Ethan Zonca.
This version adds another channel and changes the PWM input from screw terminals to a pin header.
https://www.sparkfun.com/products/11850
82 - Quantar v.24 Interface R2
author: kayfox
2 layer board of 2.74 x 1.60 inches (69.5 x 40.6 mm)
Uploaded:
July 20, 2014
Shared:
July 20, 2014
Total Price:
$21.85
One to one replacement for the Motorola TTN4010C V.24 board. If you don’t know what this is you probably shouldn’t order this.
http://communications.support/threads/4823-Quantar-V-24-replacement-board
One to one replacement for the Motorola TTN4010C V.24 board. If you don’t know what this is you probably shouldn’t order this.
http://communications.support/threads/4823-Quantar-V-24-replacement-board
