K-rAd_PSU
author: K-rAd
2 layer board of 3.63 x 1.50 inches (92.1 x 38.1 mm)
Uploaded:
June 16, 2014
Shared:
August 08, 2014
Total Price:
$27.15
+/- 12v Power Supply requires a transformer and AC input fuse/switch/jack
+/- 12v Power Supply requires a transformer and AC input fuse/switch/jack
Pro mini breakout 0.1 with power supply 5v and 3.3V
author: Wesselah
2 layer board of 1.54 x 2.19 inches (39.2 x 55.6 mm)
Uploaded:
August 08, 2014
Shared:
August 08, 2014
Total Price:
$16.85
Pro mini breakout with power supply 5v - 3.3v that will make projects easier compatible withe several pro mini designs
Pro mini breakout with power supply 5v - 3.3v that will make projects easier compatible withe several pro mini designs
ProMini clock shield with HDSP-2534 display
author: FlorinC
2 layer board of 1.60 x 1.77 inches (40.5 x 45.0 mm)
Uploaded:
August 03, 2014
Shared:
August 08, 2014
Total Price:
$14.10
ProMini clock shield with DS1307 and HDSP-2534 LED 8-character display.
Tested and confirmed working. Compatible (schematic, software) with this clock
ProMini clock shield with DS1307 and HDSP-2534 LED 8-character display.
Tested and confirmed working. Compatible (schematic, software) with this clock
RJ45 LED Breakout v1.0
author: nslogan
2 layer board of 0.65 x 1.20 inches (16.5 x 30.5 mm)
Uploaded:
August 08, 2014
Shared:
August 08, 2014
Total Price:
$3.90
Simple breakout board for an RJ45 with LEDs. Has two 0805 resistor pads tied to Vin with pins for LED1/2-. Has solder pads for both shield legs to optionally tie to ground. Intended for use with Amphenol RJHSE-548x series. You can find [this project on GitHub](https://github.com/nslogan/RJ45-LED-…
Show full description
Simple breakout board for an RJ45 with LEDs. Has two 0805 resistor pads tied to Vin with pins for LED1/2-. Has solder pads for both shield legs to optionally tie to ground. Intended for use with Amphenol RJHSE-548x series. You can find [this project on GitHub](https://github.com/nslogan/RJ45-LED-…
Show full description
Si5351A Breakout Board Rev B
author: Etherkit
2 layer board of 1.58 x 1.97 inches (40.1 x 50.1 mm)
Uploaded:
July 30, 2014
Shared:
August 07, 2014
Total Price:
$15.55
A handy way to interface with the Si5351A clock generator IC
A handy way to interface with the Si5351A clock generator IC
TDR
author: evilxyzzy
2 layer board of 1.75 x 1.60 inches (44.5 x 40.6 mm)
Uploaded:
August 07, 2014
Shared:
August 07, 2014
Total Price:
$14.00
Time Domain Reflectometer - circuit by Tomi Engdahl. More info here : http://www.epanorama.net/circuits/tdr.html
Time Domain Reflectometer - circuit by Tomi Engdahl. More info here : http://www.epanorama.net/circuits/tdr.html
USB 2 Port Hub DCP Enumerator / Charge Adapter V2
author: Warhawk
2 layer board of 0.87 x 1.50 inches (22.1 x 38.1 mm)
Uploaded:
August 05, 2014
Shared:
August 06, 2014
Total Price:
$6.50
USB 2 Port Hub DCP Enumerator / Charge Adapter V2
Show full description
USB 2 Port Hub DCP Enumerator / Charge Adapter V2
Tek
author: Kilohercas
2 layer board of 1.24 x 0.36 inches (31.4 x 9.0 mm)
Uploaded:
July 21, 2014
Shared:
August 06, 2014
Total Price:
$2.15
Application module
Application module
ATtiny85 with dht11, 433Mhz transmiter,LDR, PIR
author: Wesselah
2 layer board of 1.41 x 1.20 inches (35.9 x 30.5 mm)
Uploaded:
August 06, 2014
Shared:
August 06, 2014
Total Price:
$8.45
small environment pcb, multipurpose board with programming interface
small environment pcb, multipurpose board with programming interface
[OUTDATED] Firmware Developers Only - 17mm DD+7135
author: Red
2 layer board of 0.67 x 0.67 inches (17.0 x 17.0 mm)
Uploaded:
August 06, 2014
Shared:
August 06, 2014
Total Price:
$2.20
If you can't figure out the component placements on a completely unlabeled board, this is not for you. This board does not have a firmware available. This board is untested. This board does not have the [June/July 2014] anti-boost fix incorporated, MCU voltage may go too high. Any silkscreen …
Show full description
If you can't figure out the component placements on a completely unlabeled board, this is not for you. This board does not have a firmware available. This board is untested. This board does not have the [June/July 2014] anti-boost fix incorporated, MCU voltage may go too high. Any silkscreen …
Show full description
SNES Flash Mask ROM - 32 Mbit
author: Dongulus
2 layer board of 2.06 x 0.81 inches (52.2 x 20.5 mm)
Uploaded:
August 06, 2014
Shared:
August 06, 2014
Total Price:
$8.25
Board to breakout 32 Mbit Intel 28F320J5 flash chip to fit in a Super Nintendo cartridge mask ROM slot.
Board to breakout 32 Mbit Intel 28F320J5 flash chip to fit in a Super Nintendo cartridge mask ROM slot.
BinaryQuad
author: BinarySpike
2 layer board of 2.21 x 2.11 inches (56.1 x 53.6 mm)
Uploaded:
August 06, 2014
Shared:
August 06, 2014
Total Price:
$23.30
Arduino Uno breakout shield for RFM22B-S2, AltIMU-10 v3, and 5v-to-3.3v level shifter.
Arduino Uno breakout shield for RFM22B-S2, AltIMU-10 v3, and 5v-to-3.3v level shifter.
Big Muff 1/2W
author: mmolteratx
2 layer board of 2.33 x 2.24 inches (59.1 x 56.8 mm)
Uploaded:
August 06, 2014
Shared:
August 06, 2014
Total Price:
$26.00
Same as the other one, but with 1/2W resistors.
Schematic: https://dl.dropboxusercontent.com/u/8021347/MayonaiseIII.png
Same as the other one, but with 1/2W resistors.
Schematic: https://dl.dropboxusercontent.com/u/8021347/MayonaiseIII.png
