Shared Projects

Shared Projects

NRF worm

author: KingOfKYA
Top
Bottom

2 layer board of 0.48 x 1.87 inches (12.1 x 47.4 mm)
Uploaded: September 14, 2014
Shared: September 14, 2014
Total Price: $4.45

Pin Comparable adapter for MAX485 and other differential drivers chips. To an atmega328 and a low cost nrf24l01 module. Use with DMX or renard out sketches: https://github.com/komby/RFShowControl

Pin Comparable adapter for MAX485 and other differential drivers chips. To an atmega328 and a low cost nrf24l01 module. Use with DMX or renard out sketches: https://github.com/komby/RFShowControl

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

datalogger

author: nak
Top
Bottom

2 layer board of 0.77 x 0.88 inches (19.7 x 22.2 mm)
Uploaded: July 14, 2014
Shared: September 14, 2014
Total Price: $3.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RFM12B Board V1.00

author: arduinopraxis
Top
Bottom

2 layer board of 0.83 x 1.46 inches (21.0 x 37.0 mm)
Uploaded: September 14, 2014
Shared: September 14, 2014
Total Price: $6.00

Breakout Board for wireless projects with RFM12B transceiver. Ready for use with Arduino and 5V signals.

Project Details

Breakout Board for wireless projects with RFM12B transceiver. Ready for use with Arduino and 5V signals.

Project Details

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RGB_SL3_JM

author: Cereal_Killer
Top
Bottom

2 layer board of 1.18 x 1.08 inches (30.0 x 27.4 mm)
Uploaded: September 14, 2014
Shared: September 14, 2014
Total Price: $6.35

6*7135x3 RGB driver for SL-3 running DrJones FW

6*7135x3 RGB driver for SL-3 running DrJones FW

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NP-100v12: 12AU7 (ECC82) / IRF510 Headphone Amp

author: NobleX13
Top
Bottom

2 layer board of 3.18 x 2.04 inches (80.8 x 51.8 mm)
Uploaded: September 14, 2014
Shared: September 14, 2014
Total Price: $32.40

12AU7 Tube Amp PCB

12AU7 Tube Amp PCB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Valdez Mutant v.04

author: Ladvien
Top
Bottom

2 layer board of 0.71 x 1.85 inches (18.0 x 47.0 mm)
Uploaded: August 23, 2014
Shared: September 13, 2014
Total Price: $6.55

Valdez Mutant v.04 – corrected from v.01

Prototyping info.

Alt text

Valdez Mutant v.04 – corrected from v.01

Prototyping info.

Alt text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sea flea 1.1 copy

author: jimilee
Top
Bottom

2 layer board of 1.14 x 2.35 inches (28.9 x 59.7 mm)
Uploaded: January 27, 2014
Shared: September 13, 2014
Total Price: $13.35

Sea urchin, 1590A

Sea urchin, 1590A

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB-RS232 Converter (FT232RL + ADM213E)

author: Cthulhu
Top
Bottom

2 layer board of 1.20 x 0.68 inches (30.4 x 17.2 mm)
Uploaded: September 13, 2014
Shared: September 13, 2014
Total Price: $4.05

A small USB-RS232 Converter

Designed for housing DPT-9C

Bug: D- and D+ confused labeling

Tested. It's work!

More

A small USB-RS232 Converter

Designed for housing DPT-9C

Bug: D- and D+ confused labeling

Tested. It's work!

More

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduinio In Circuit Test Shield V1.10

author: PaulS
Top
Bottom

2 layer board of 2.61 x 2.46 inches (66.2 x 62.4 mm)
Uploaded: July 12, 2014
Shared: September 13, 2014
Total Price: $31.95

Arduinio In Circuit Test Shield V1.10

Arduinio In Circuit Test Shield V1.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

2D1R

author: robarago
Top
Bottom

2 layer board of 1.94 x 1.70 inches (49.2 x 43.2 mm)
Uploaded: September 13, 2014
Shared: September 13, 2014
Total Price: $16.40

A display with 2x7 segments driven by a simple shift register. Only 4 data pins needed to control the display. You can use my Arduino library or use your own implementation. …

Show full description

A display with 2x7 segments driven by a simple shift register. Only 4 data pins needed to control the display. You can use my Arduino library or use your own implementation. …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PC-Engine Control Board 1P V1.2

author: Ptchnk
Top
Bottom

2 layer board of 1.42 x 1.29 inches (36.0 x 32.8 mm)
Uploaded: August 23, 2014
Shared: September 13, 2014
Total Price: $9.10

PC-Engine to control panel. Replace PC-Engine hackpads

PC-Engine to control panel. Replace PC-Engine hackpads

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RTK-000-002

author: Ryanteck
Top
Bottom

2 layer board of 1.38 x 0.69 inches (35.0 x 17.5 mm)
Uploaded: March 16, 2014
Shared: September 13, 2014
Total Price: $4.75

Raspberry Pi UART Board

Raspberry Pi UART Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

The Amazing FET Circlotron: Amplifier board

Top
Bottom

2 layer board of 4.01 x 3.81 inches (101.8 x 96.7 mm)
Uploaded: September 13, 2014
Shared: September 13, 2014
Total Price: $76.20

Amplifier board for Michael Rothacher's Amazing FET Circlotron (https://www.passdiy.com/gallery/amplifiers/build-the-amazing-fet-circlotron). The board has been modified to have slightly larger holes and pads for input and output wiring. Q1 and Q2 have been rotated to allow use of a dual 2SJ74B…

Show full description

Amplifier board for Michael Rothacher's Amazing FET Circlotron (https://www.passdiy.com/gallery/amplifiers/build-the-amazing-fet-circlotron). The board has been modified to have slightly larger holes and pads for input and output wiring. Q1 and Q2 have been rotated to allow use of a dual 2SJ74B…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Amazing FET Circlotron: Power board

Top
Bottom

2 layer board of 4.51 x 1.71 inches (114.4 x 43.4 mm)
Uploaded: September 13, 2014
Shared: September 13, 2014
Total Price: $38.45

Power board for Michael Rothacher's Amazing FET Circlotron (https://www.passdiy.com/gallery/amplifiers/build-the-amazing-fet-circlotron). The board has been modified to have slightly larger holes and pads for input and output wiring.

Power board for Michael Rothacher's Amazing FET Circlotron (https://www.passdiy.com/gallery/amplifiers/build-the-amazing-fet-circlotron). The board has been modified to have slightly larger holes and pads for input and output wiring.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Raspberry Pi UART and I2C breakout

author: AndiceLabs
Top
Bottom

2 layer board of 1.50 x 0.90 inches (38.2 x 23.0 mm)
Uploaded: August 06, 2014
Shared: September 12, 2014
Total Price: $6.75

Simple FTDI interface for console UART and I2C. Allows you to easily use an FTDI-compatible cable (ex: Adafruit FTDI-friend) to gain console access to the Raspberry Pi.

Connectors:

  • Female header: Sullins S7116-ND
  • FTDI: FCI 68016-106HLF
  • I2C: TE 640457-4
  • I2C mate: TE 3-643814-…

Show full description

Simple FTDI interface for console UART and I2C. Allows you to easily use an FTDI-compatible cable (ex: Adafruit FTDI-friend) to gain console access to the Raspberry Pi.

Connectors:

  • Female header: Sullins S7116-ND
  • FTDI: FCI 68016-106HLF
  • I2C: TE 640457-4
  • I2C mate: TE 3-643814-…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Heat Pump Relay Controller

author: schizobovine
Top
Bottom

2 layer board of 1.65 x 1.55 inches (41.9 x 39.4 mm)
Uploaded: September 12, 2014
Shared: September 12, 2014
Total Price: $12.75

Board to twiddle the relays of a 24VAC heat pump system. Also has 24VAC out to go to a switching power supply so that the unit can be powered off the 24VAC transformer.

Board to twiddle the relays of a 24VAC heat pump system. Also has 24VAC out to go to a switching power supply so that the unit can be powered off the 24VAC transformer.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MBN-EQ7

author: mhectorgato
Top
Bottom

2 layer board of 1.08 x 1.10 inches (27.3 x 27.9 mm)
Uploaded: September 12, 2014
Shared: September 12, 2014
Total Price: $5.90

MikroBUS.NET EQ7 - MSGEQ 7 band graphic equalizer display filter. The frequencies are:

63Hz 160Hz 400Hz 1kHz 2.5kHz 6.25kHz 16kHz

Visit http://www.mikrobusnet.org for more information

MikroBUS.NET EQ7 - MSGEQ 7 band graphic equalizer display filter. The frequencies are:

63Hz 160Hz 400Hz 1kHz 2.5kHz 6.25kHz 16kHz

Visit http://www.mikrobusnet.org for more information

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HW000-00005

author: vboardz
Top
Bottom

2 layer board of 0.76 x 0.66 inches (19.3 x 16.7 mm)
Uploaded: October 04, 2013
Shared: September 12, 2014
Total Price: $2.45

ICSP to 2mm SRH

ICSP to 2mm SRH

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

diffamp3

author: martinlk
Top
Bottom

2 layer board of 3.26 x 3.26 inches (82.7 x 82.7 mm)
Uploaded: September 12, 2014
Shared: September 12, 2014
Total Price: $52.95

MIT SNL differential amplifier

MIT SNL differential amplifier

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

max3421

author: bobricius
Top
Bottom

2 layer board of 0.86 x 0.65 inches (21.7 x 16.5 mm)
Uploaded: July 28, 2013
Shared: September 12, 2014
Total Price: $2.75

usb host board

usb host board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy