Shared Projects

Shared Projects

GPS receiver with 128x32 OLED display

author: dimel23
Top
Bottom

2 layer board of 1.44 x 1.41 inches (36.5 x 35.9 mm)
Uploaded: June 8th 2013
Shared: January 4th 2014
Total Price: $10.15

GPS receiver with MT3339 and ATmega328P-AU

GPS receiver with MT3339 and ATmega328P-AU

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Joy

author: Gogin
Top
Bottom

2 layer board of 1.51 x 0.78 inches (38.4 x 19.8 mm)
Uploaded: January 4th 2014
Shared: January 4th 2014
Total Price: $5.85

The control electronics for DIY electronic cigarette with touch screen operation

The control electronics for DIY electronic cigarette with touch screen operation

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Linebot v1.0

author: Nitehawk
Top
Bottom

2 layer board of 3.84 x 1.94 inches (97.6 x 49.3 mm)
Uploaded: January 3rd 2014
Shared: January 4th 2014
Total Price: $37.25

Line Following Robot

See: https://github.com/nitehawk/linebot

Note - 3d models will currently only be created for the v1.0 PCBs

Line Following Robot

See: https://github.com/nitehawk/linebot

Note - 3d models will currently only be created for the v1.0 PCBs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

pmod-pass-thru-BONE

author: valentfx
Top
Bottom

2 layer board of 1.63 x 0.43 inches (41.4 x 10.9 mm)
Uploaded: January 4th 2014
Shared: January 4th 2014
Total Price: $3.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

pmod pass thru test jig - Pi

author: valentfx
Top
Bottom

2 layer board of 3.43 x 0.43 inches (87.1 x 10.9 mm)
Uploaded: January 4th 2014
Shared: January 4th 2014
Total Price: $7.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Sata Loopback Ra1

author: valentfx
Top
Bottom

4 layer board of 0.69 x 0.76 inches (17.6 x 19.2 mm)
Uploaded: January 4th 2014
Shared: January 4th 2014
Total Price: $5.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Atiny Bitsy Spider

author: Ladvien
Top
Bottom

2 layer board of 0.88 x 1.16 inches (22.2 x 29.5 mm)
Uploaded: January 4th 2014
Shared: January 4th 2014
Total Price: $5.05

ATtiny85 and HM-10

<http://letsmakerobots.com/node/39795>

Alt text

ATtiny85 and HM-10

<http://letsmakerobots.com/node/39795>

Alt text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Teensy 3.1 Carrier Board

author: JonHylands
Top
Bottom

2 layer board of 1.50 x 1.77 inches (38.0 x 45.0 mm)
Uploaded: December 17th 2013
Shared: January 3rd 2014
Total Price: $13.25

A carrier board for a Teensy 3.1 inside a small crawler robot - Github

A carrier board for a Teensy 3.1 inside a small crawler robot - Github

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

LTAR Display V4.0

author: izzy84075
Top
Bottom

2 layer board of 1.10 x 1.77 inches (28.0 x 45.0 mm)
Uploaded: January 3rd 2014
Shared: January 3rd 2014
Total Price: $9.75

Display module for LTAR

Display module for LTAR

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Pinoccio Capacitive Backpack v0.1

author: Cisco25
Top
Bottom

2 layer board of 1.01 x 1.69 inches (25.6 x 42.9 mm)
Uploaded: December 2nd 2013
Shared: January 3rd 2014
Total Price: $8.50

Buttons, proximity, slider

Buttons, proximity, slider

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Trail Traffic Counter v4

author: chipmc
Top
Bottom

2 layer board of 2.34 x 2.00 inches (59.4 x 50.8 mm)
Uploaded: January 2nd 2014
Shared: January 3rd 2014
Total Price: $23.35

Tested - Works

This is a prototype board to help me do some field testing. The intent is to place this device near an obstacle on a single track mountain…

Tested - Works

This is a prototype board to help me do some field testing. The intent is to place this device near an obstacle on a single track mountain…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Xmas Tree

author: Phara0h
Top
Bottom

2 layer board of 3.06 x 3.86 inches (77.7 x 98.0 mm)
Uploaded: December 9th 2013
Shared: January 3rd 2014
Total Price: $59.00

LED xmas tree!

LED xmas tree!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Lithium Polymer USB Battery Charger

author: PETE
Top
Bottom

2 layer board of 0.98 x 0.70 inches (25.0 x 17.8 mm)
Uploaded: November 10th 2013
Shared: January 3rd 2014
Total Price: $3.40

http://electronics-diy.com/electronic_schematic.php?id=809

http://electronics-diy.com/electronic_schematic.php?id=809

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Lazer Tag Host 0.1.0

author: thatdecade
Top
Bottom

2 layer board of 1.70 x 2.10 inches (43.2 x 53.4 mm)
Uploaded: May 20th 2013
Shared: January 2nd 2014
Total Price: $17.85

Laser Tag Host Arduino Shield.
Source Code: https://github.com/rmcardle/LazerTagHost

Laser Tag Host Arduino Shield.
Source Code: https://github.com/rmcardle/LazerTagHost

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Lazer Tag USB Host 0.1.1

author: thatdecade
Top
Bottom

2 layer board of 1.35 x 1.30 inches (34.2 x 33.0 mm)
Uploaded: May 31st 2013
Shared: January 2nd 2014
Total Price: $8.75

Arduino based Laser Tag PC Hosting over USB.
Source Code: https://github.com/rmcardle/LazerTagHost

Arduino based Laser Tag PC Hosting over USB.
Source Code: https://github.com/rmcardle/LazerTagHost

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

LTAR Minidisplay V4.0_3

author: thatdecade
Top
Bottom

2 layer board of 1.10 x 1.77 inches (28.0 x 45.0 mm)
Uploaded: January 2nd 2014
Shared: January 2nd 2014
Total Price: $9.75

Display module for LTAR
Designed by: http://oshpark.com/profiles/izzy84075
More Info: http://gitlab.meldaire.net/public/projects

Display module for LTAR
Designed by: http://oshpark.com/profiles/izzy84075
More Info: http://gitlab.meldaire.net/public/projects

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

WauCard V. 1.1.0

author: ElectricCoffee
Top
Bottom

2 layer board of 2.43 x 2.36 inches (61.6 x 60.0 mm)
Uploaded: January 2nd 2014
Shared: January 2nd 2014
Total Price: $28.60

An updated version of the WauCard, this time with added LEDs; one on pin 13 and one for TX and RX respectively

An updated version of the WauCard, this time with added LEDs; one on pin 13 and one for TX and RX respectively

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

uNRFv2 Z mod

author: tterev3
Top
Bottom

2 layer board of 1.43 x 0.76 inches (36.2 x 19.2 mm)
Uploaded: January 2nd 2014
Shared: January 2nd 2014
Total Price: $5.35

modified version of uNRFv2 with trace antenna and mounting holes

modified version of uNRFv2 with trace antenna and mounting holes

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

WauCard Micro Controller

author: ElectricCoffee
Top
Bottom

2 layer board of 2.43 x 2.36 inches (61.6 x 60.0 mm)
Uploaded: January 2nd 2014
Shared: January 2nd 2014
Total Price: $28.60

A simple thru-hole Microcontroller board based on the Arduino's schematic, it is however incompatible with Arduino Shields

A simple thru-hole Microcontroller board based on the Arduino's schematic, it is however incompatible with Arduino Shields

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project

Metal Detector

author: Scott216
Top
Bottom

2 layer board of 2.06 x 1.65 inches (52.3 x 41.9 mm)
Uploaded: January 2nd 2014
Shared: January 2nd 2014
Total Price: $16.95

Ref: Silicon Chip June 2002 Thomas Scarborough
Eagle board files are on GitHub
[PDF Instructions](h…

Ref: Silicon Chip June 2002 Thomas Scarborough
Eagle board files are on GitHub
[PDF Instructions](h…

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project
Whaleshark white