FPV car tx 16f819
author: rudyauction509
2 layer board of 2.57 x 1.26 inches (65.2 x 31.9 mm)
Uploaded:
February 8th 2014
Shared:
February 15th 2014
Total Price:
$16.10
v1.0, microcontroller: 16f819,
http://www.rcgroups.com/forums/showthread.php?t=2102301
v1.0, microcontroller: 16f819,
http://www.rcgroups.com/forums/showthread.php?t=2102301
bike light
author: rudyauction509
2 layer board of 1.36 x 1.21 inches (34.4 x 30.6 mm)
Uploaded:
January 31st 2014
Shared:
February 15th 2014
Total Price:
$8.15
Simple bike taillight for pic16f630, R9 is 1k, all others 100 ohm. Use 5mm LEDs of your choice, I used red and green flashing alternately. Runs on 3x AA or A…
Simple bike taillight for pic16f630, R9 is 1k, all others 100 ohm. Use 5mm LEDs of your choice, I used red and green flashing alternately. Runs on 3x AA or A…
Li-ion Charger revision v1.0
author: NickLeijenhorst
2 layer board of 0.87 x 1.50 inches (22.0 x 38.0 mm)
Uploaded:
February 14th 2014
Shared:
February 14th 2014
Total Price:
$6.45
Charges a 1-cell Li-ion battery through mini-USB or another input (3.75v - 6v)
Charging current selectable through a solder jumper
Big solder pad…
Charges a 1-cell Li-ion battery through mini-USB or another input (3.75v - 6v)
Charging current selectable through a solder jumper
Big solder pad…
Tinusaur Proto S v0.1 m1
author: boyanov
2 layer board of 0.80 x 1.00 inches (20.4 x 25.5 mm)
Uploaded:
February 13th 2014
Shared:
February 14th 2014
Total Price:
$4.00
This is prototyping board for the Tinusaur project board.
The Tinusaur is a minimal micro-controller hardware configuration based on Atmel AVR ATtiny fami…
This is prototyping board for the Tinusaur project board.
The Tinusaur is a minimal micro-controller hardware configuration based on Atmel AVR ATtiny fami…
ATTINY1634 A-DIP-TER
author: aberry
2 layer board of 1.00 x 0.82 inches (25.4 x 20.8 mm)
Uploaded:
February 14th 2014
Shared:
February 14th 2014
Total Price:
$4.05
Breadboard-friendly ATTINY1634 dev board with xtal, ISP header, decoupling cap
Breadboard-friendly ATTINY1634 dev board with xtal, ISP header, decoupling cap
BLF TINY10
author: Mattaus
2 layer board of 0.42 x 0.42 inches (10.6 x 10.6 mm)
Uploaded:
February 13th 2014
Shared:
February 13th 2014
Total Price:
$0.85
10mm Nanjg 105C compatible LED/flashlight driver.
- Diode D1 is a BAT54.
- C1 is 10 uF.
- Resistors are 19.1K and 4.7K, 1%
- Regulator chips are AMC713…
10mm Nanjg 105C compatible LED/flashlight driver.
- Diode D1 is a BAT54.
- C1 is 10 uF.
- Resistors are 19.1K and 4.7K, 1%
- Regulator chips are AMC713…
j201 converter
author: Clayford
2 layer board of 0.30 x 0.27 inches (7.6 x 6.9 mm)
Uploaded:
February 13th 2014
Shared:
February 13th 2014
Total Price:
$0.40
sot23 to-92 I did not design this, only shrink it as much as possible. Use resistor leads not SIL headers.
sot23 to-92 I did not design this, only shrink it as much as possible. Use resistor leads not SIL headers.
CC3000-Breakout-0805
author: james_littlefox
2 layer board of 1.15 x 0.80 inches (29.2 x 20.3 mm)
Uploaded:
February 12th 2014
Shared:
February 12th 2014
Total Price:
$4.60
This is a modification of Kuy's CC3000 Breakout , the only difference is that this board uses all 0805 capacit…
This is a modification of Kuy's CC3000 Breakout , the only difference is that this board uses all 0805 capacit…
LTAR Minidisplay V4.5_0
author: thatdecade
2 layer board of 1.10 x 1.77 inches (28.0 x 45.0 mm)
Uploaded:
February 12th 2014
Shared:
February 12th 2014
Total Price:
$9.75
LaserTag Display module for LTAR.
More info: http://gitlab.meldaire.net/izzy84075/ltar-minidisplay-releases/tree/master
LaserTag Display module for LTAR.
More info: http://gitlab.meldaire.net/izzy84075/ltar-minidisplay-releases/tree/master
STLV2RD
author: AtomSoft
2 layer board of 1.28 x 1.08 inches (32.5 x 27.4 mm)
Uploaded:
September 26th 2013
Shared:
February 12th 2014
Total Price:
$6.85
STLINK V2 Bare PCB, all parts are the same from original STLINK v2 schematic
STLINK V2 Bare PCB, all parts are the same from original STLINK v2 schematic
Hva NameTag rev. 2.0
author: NickLeijenhorst
2 layer board of 1.42 x 3.15 inches (36.0 x 80.0 mm)
Uploaded:
February 12th 2014
Shared:
February 12th 2014
Total Price:
$22.30
Features ATMEGA32U4 MCU running at 8Mhz. Designed to work with an OLED screen supporting the RS0010 chipset. Built-in Li-Ion battery charger that uses the US…
Features ATMEGA32U4 MCU running at 8Mhz. Designed to work with an OLED screen supporting the RS0010 chipset. Built-in Li-Ion battery charger that uses the US…