by nsayer.

2 layer board of 1.25x1.00 inches (31.78x25.43 mm).
Shared on November 29th, 2017 21:55.

This board adapts the GPSDO diagnostic port to USB. You get to select whether to transmit the diagnostic output or the GPS NMEA output. PPS is sent to DCD, and is positive-oriented (that is, DCD asserts on-time). The USB interface is a CDC device. Open it and set it for 9600 baud 8N1.

The SSOP chip is a CY7C65213. The SOT23-5 chip is a single inverter. The USB connector is a microB one. The diagnostic connector is a CUI MD60S. All the caps are 0.1µF except for C4, which is 4.7 µF, and C6 is 4700 pF. R1 is 10 kΩ, R2 is 4.7 kΩ and R3 is 1MΩ.

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project